We're at, and new, next-gen routers capable of putting to work .
It's early, though. Despite the fact that Wi-Fi 6 routers are backward-compatible with previous-gen Wi-Fi devices, they won't be able to do much of anything to speed them up. For that, you'll need new devices that support Wi-Fi 6, too, and-- though that could soon change, now that is on board with the speedy new standard.
Still, we won't really be able to test out Wi-Fi 6's claims of being much, much better at connecting with lots and lots of devices at once until those devices get here. You should expect to start seeing faster Wi-Fiand , but we're probably a few years away from feeling the full impact in our homes (and our test lab).
That said, early estimates describe those top Wi-Fi 6 transfer speeds as 30% faster than the top Wi-Fi 5 transfer speeds. And, while it's true that there aren't many Wi-Fi 6 client devices available yet, that doesn't mean that there aren't any. In fact, if you've got the right kind of computer, you can find a number of Wi-Fi 6 adapters on Amazon right now for $40 or less.
We picked one of those up for ourselves, and we've been using it to put the emerging crop of Wi-Fi 6 routers to the test. Here's how that's been going.
Our test setup
The first Wi-Fi 6 router we tested was the anywhere)., which promises speeds of up to 1.2 Gbps on the 2.4GHz band and up to 4.8 Gbps on the 5GHz band. There are a lot of limitations on speeds like those at the moment -- one of them being that our internet speeds aren't nearly that fast here at the office (or, you know,
We can still test each router's top transfer speeds by measuring its ability to move files around locally, though. With the Netgear Nighthawk, for instance, the router comes with a set of two 1-gigabit Ethernet ports in the back that you can aggregate into a single connection from two incoming servers. Other routers offer multi-gig Ethernet ports that support speeds as high as 2.5, 5 or even 10 Gbps.
For our tests, we connect ports like those to MacBooks that act as our servers for the test. The MacBooks transmit data to the router over those Ethernet connections -- from there, a third computer equipped with a 802.11ax card can connect to the router to download the data wirelessly at Wi-Fi 6 speeds.
With the Netgear Nighthawk AX12, speeds clocked in at 1,320 Mbps, or 1.32 Gbps. The support team for the Killer Wi-Fi 6 module in our test PC told us that the numbers we were seeing sounded about right, and that with different routers or in a different environment, perhaps one with less interference, we might see speeds as high as 1.4 or 1.5 Gbps.
So, we kept testing. To date, the fastest Wi-Fi 6 speeds we've seen came from the TP-Link Archer AX6000, which measured in withat a distance of 5 feet. Range was strong with that router, too -- at a distance of 75 feet, the connection still averaged out to a blazing fast 868 Mbps.
But hey, that's a lot of numbers, and numbers are easier to process when you put them into perspective. To do so, I'mma call in the big guns.
From Robert Downey Jr.'s debut as Tony Stark to the climactic clash with Thanos 11 years later (and setting aside) the consists of a whopping 22 films adapted from Marvel comic books, stretching . It'd take more than 48 hours of screen time to watch them all (just ask CNET's Abrar Al-Heeti, ).
Now, let's say you wanted to follow in Abrar's footsteps and host a Marvel marathon of your own with those same 22 films. You don't want to rent, you don't want to stream, and you don't want to wrangle a bunch of discs -- you want your own, high-quality digital copies of each film, and you'll need to download them.
Assuming you were downloading them in 4K resolution using the same compression standards as Blu-Ray, each film would eat up about 70 gigabytes of storage space. The grand total for 48 hours and 11 minutes of footage? 1,580 gigabytes -- more than a terabyte and a half.
So. How long would it take you to download all of those files?
Well, according to the global speed index at Ookla, a top speed-testing site, the average fixed broadband download speed in the US is now 124 megabits per second. Bits aren't the same as bytes, mind you, but the conversion is easy: You just divide the bits by 8.
So, with that average, 124-megabits-per-second connection, you'd be able to download about 15 megabytes per second -- or .015 gigabytes per second. Dividing our grand total of 1,580 gigabytes by .015 tells us that downloading the entire MCU with an average connection speed would take 105,333 seconds.
That's roughly 29 hours and 16 minutes. And you don't even have a time stone to speed things up.
In my home, I'm lucky enough to have a direct fiber connection. My plan is set at 300 Mbps, which is easily fast enough for my purposes, but entry-level as far as fiber goes. If that speed held steady, I'd be able to download the entire MCU in about 11 hours, 42 minutes.
What if I upgraded to the best possible fiber connection, complete with the top-of-the-line hardware needed to take advantage of it? The fastest Wi-Fi 5 router we've tested is the, which clocked in with an impressive transfer speed of 938 Mbps on the 5GHz band. With that router and a fiber connection that was fast enough to match it, I could download all 22 MCU films in about 3 hours and 45 minutes.
This brings us to Wi-Fi 6. Like I said before, we clocked the TP-Link Archer AX6000 at a top transfer speed of 1,523 Mbps. Assuming we had an internet connection of at least that speed, we'd be able to download all 22 films in just 2 hours and 18 minutes. At that speed, you could download the entire MCU almost 13 times before someone connected at the average US speed was able to download it once.
Hold your horses
Again, the big, obvious problem with all of that is that most people don't have access to faster-than-average internet speeds. A direct fiber connection only became available in my neighborhood very recently -- before that, I was living with cable internet download speeds of about 62 Mbps, which is well below the national average.
A Wi-Fi 6 router wouldn't do much of anything to speed up a connection like that, or even the speedier fiber connection I'm enjoying now. And without Wi-Fi 6-compatible laptops and devices, I wouldn't be able to enjoy the faster local transfers within my home's network, either. For almost all of us, it's way too early to upgrade to a new Wi-Fi 6 router.
It's a bit like a bucket brigade. A Wi-Fi 6 router is like someone who's really, really good at passing buckets of water back and forth -- say, 100 buckets a minute. But that only matters if the guy next to him is also capable of handling 100 buckets per minute. If that person can only hand off 20 buckets per minute, then 20 buckets per minute is all you can expect from the entire brigade.
In other words, your internet connection is only as fast as its slowest link. And for most of us, our ISP's top download speed is going to be the slowest link.
The silver lining to that is that is that we can expect some pretty dramatic jumps in internet speeds in the coming years. Experts pegged Wi-Fi 6 as 30% faster than Wi-Fi 5, and our early tests seem to indicate that it's an accurate claim. But that's compared to the fastest possible Wi-Fi 5 connections. The speed jumps are much, much more significant when you compare them to the average internet speeds that most of us are currently stuck with. Not 30% faster, but 1,000% faster.
And that's just based off of our first speed test -- other routers might produce even faster results in the months ahead. One option from TP-Link even promises-- nearly 11 gigabits per second.
Of course, jumps like that are going to require more than just a new router -- they're going to require fiber internet speeds that are faster than a single gigabit per second. Connections like that aren't widely available yet, but when they get here, it appears that the hardware will be ready to take advantage of them. That's thanks to Wi-Fi 6.
In the meantime, we'll continue testing out the newest routers to see if we can find any that are even faster than the models we've already tested. You can also expect to seeand for the current-gen routers and mesh systems that can tide you over until Wi-Fi 6 becomes a more meaningful upgrade. Do stay tuned.
Originally published Aug. 2 and updated regularly.