This story is part of, CNET's collection of practical advice for getting the most out of your home, inside and out.
Surely, we've all had an argument with a partner, family member or roommate about how to load the. But is there really a "wrong" way to do it?
While it might seem easiest to just put everything where it fits, that's a recipe for leaving your plates, forks and spoons left with crust and grime. The way you choose to load your dishwasher really does have a major impact on how well your dishes get cleaned -- and there is indeed a correct method.
Follow these tips to help you get much cleaner dishes the next time you run your dishwasher -- and settle arguments over whose method is right. (For more cleaning advice, check out, and .)
1. Don't rinse your dishes
Leave most of the washing to the dishwasher. Just scrape off the big stuff from the plates first, then load them on in. Don't worry about rinsing, as it can actually trick the dishwasher's sensors. Learn more about.
2. Plates go on the bottom rack
Load the plates on the bottom rack, but make sure they have a little space between them. Touching can block the water jets and can also cause chips in a plate's finish.
3. Bowls go on the top rack
Put bowls on the top rack. Make sure the bowls are tilted down so they don't gather water.
3. Turn your cups upside-down
Same for cups. Put them on the top rack in between the tines, if possible. They should be upside down so they don't fill up with water, but tilt them slightly so that water doesn't pool in any indentations on the bottom of the cup.
4. Spoons and forks go in the utensil cup
This sounds obvious, I know, but some people ignore the fact that there's a special cup for utensils. If you're one of these people, stop it. Throwing a handful of utensils on the top rack will not get them as clean as putting them in their designated cup. Besides, putting them in the cup prevents them from dropping down and blocking the sprayer arms.
5. Keep your silverware and stainless steel utensils from touching
Always put silverware except for knives in the designated cups with the handles facing downward. Don't let real silverware and stainless-steel utensils touch, though. During washing, a chemical reaction can cause pitting in the metal.
7. Put knife points down, handles up
Place knives in the silverware cup with the points inside of the cup and the handles upward.
8. Don't let spoons and spatulas fall down
Big serving spoons and spatulas are best placed on the top rack so they don't fall and block the dishwasher's spraying arms. A handy trick is to thread a tine through the hole in the handle to keep the item in place during the wash.
9. Wash large pots separately
Small pots can be placed on the bottom rack, but make sure to do larger pots in a separate load. Larger pots can block water jets, leaving the dishes on top dirty. Also, make sure that all pots are angled down so they get the full benefit of the jets.
10. Plastic containers go on the top rack, away from heat
Put plastic storage containers on the top rack so they don't get warped by the heating element.
11. Place large pans and dishes away from the dishwasher door
Make sure not to put any large pans or dishes by the door. This can block the detergent from deploying.
12. Don't forget to do a quick prewash check
Before you start the load, do a quick check of the floor below the sprayer arms. Make sure there isn't any food, spoons or other items that could block the filter or the sprayer arms. Foreign items down there can gum up the works and make your dishwasher not work properly.
Now you can start loading that dishwasher the right way, and get clean dishes every time.
For more, check out, and .