NASA may have fixed the Hubble Telescope the way you fix your router

Turn it off. Turn it on. Fiddle with the settings. Pray.

Sean Buckley Social Media Producer
2 min read

Astronauts photographed Hubble during a space shuttle servicing mission in 2009.


There's a reason the first step to troubleshooting technology is usually ridiculously simple: turning things off and on again often works. It shouldn't be any surprise then, that when one of the Hubble Space Telescope's gyroscopes stated acting up, NASA decided to try putting the faulty backup gyro through a "running restart."

OK, that's a little more complicated than turning it off and on again. The gryoscope had been deactivated for over 7.5 years, and since starting back up, it had been returning incorrect rotation rates. NASA hoped that turning the gryo off for a single second, then restarting it before the wheel stopped spinning, might clear the fault -- but it didn't work. Instead, NASA coaxed the gyro into normal operation by switching it into "high mode" and "low mode" while turning the Telescope in opposite directions.

Here's how NASA described the process, in technical terms:

In an attempt to correct the erroneously high rates produced by the backup gyro, the Hubble operations team executed a running restart of the gyro on Oct. 16. This procedure turned the gyro off for one second, and then restarted it before the wheel spun down. The intention was to clear any faults that may have occurred during startup on Oct. 6, after the gyro had been off for more than 7.5 years. However, the resulting data showed no improvement in the gyro's performance. 

On Oct. 18, the Hubble operations team commanded a series of spacecraft maneuvers, or turns, in opposite directions to attempt to clear any blockage that may have caused the float to be off-center and produce the exceedingly high rates. During each maneuver, the gyro was switched from high mode to low mode to dislodge any blockage that may have accumulated around the float.

It's true, that's a little more complicated than my gross oversimplification -- but it's sort of fun to imagine the steps for fixing the Hubble Space Telescope aren't that different than the steps you might take to troubleshoot your router. Turn it off and on again. Jiggle things back and forth. Play around with the settings. If you're lucky, these seemingly meaningless actions will reset whatever was wrong and get things back on track. After all, it works for NASA.

The Hubble operations team says the problem seems to have been resolved, but it will be running additional tests to make sure before returning the telescope to normal operations.

19 photos from NASA astronaut Scott Kelly show Earth's 'Infinite Wonder'

See all photos

NASA turns 60: The space agency has taken humanity farther than anyone else, and it has plans to go further.

Taking It to Extremes: Mix insane situations -- erupting volcanoes, nuclear meltdowns, 30-foot waves -- with everyday tech. Here's what happens.