This Simple Trick Will Make Opening Cans So Much Easier

You know that trusty can opener rattling around in your kitchen cabinet? Well, you're probably using it wrong.

The way most people (including myself) use their handheld can opener is vertically, with the cutting edge on top of the lip and the turning knob sitting on the side of the can. 

This method absolutely gets the job done, but there are always a few issues to deal with. Maybe the lid isn't completely cut all the way around, and so you have to pry it up with a fork or a finger, or the lid is cut, but then it falls into the can and then you need to fish it out when you dump the contents.

Fortunately, there's another way to do it that won't result in sharp edges or needing to use your fingers to remove the lid from inside the can. Here's how to use your can opener the right way.

For more tips, here's how to pit an avocado without ending up in the ER and how to make a chocolate mug cake.

What kind of can opener are we talking about here?

Before we start, there are several types of can openers for the kitchen, which more or less all serve the purpose of opening up a can. However, for this tip, we'll be working with your run-of-the-mill, hand-operated can opener, which you probably have sitting in a kitchen drawer. This type of can opener-- known as a bunker can opener -- has two plierlike handles, a cutting wheel and a knob you turn to rotate the wheel around the can.

Here's the right way to use your can opener

Now that you've got the correct can opener in hand, it's time to open a can -- the correct way! Instead of putting the knob on the side of the can and puncturing the lid from the top, rotate the can opener so that the handle is parallel with the lid, facing up, and the cutting wheel pierces the side of the can, right below the lip of the can. Now just rotate the hand right above the lid until the lid is completely removed from the can, which means it'll probably be stuck to the can opener. You can check out the photo below for guidance. 

The first time you use this method, you may have a little trouble starting because it requires a little more oomph to cut through the side of the can, but you'll soon get the hang of it. 

Why use your can opener this way?

The best reason to use this method is because it prevents the lid from falling into the food and contaminating it, especially if it's dirty. With this method, as soon as you finish opening the can, the lid is stuck in your can opener, which you can then simply lift up and place on the side. Also, this method creates fewer jagged edges, in case you need to handle the lid with your hands.

One thing to be careful about: Because this method removes more of the lid than the traditional way, you may have a bit of leakage if the can is topped off with liquid. However, this shouldn't be a problem if you're dealing with solid food.

If you find you prefer this method, you can even buy a can opener specifically designed to cut the side of the can.

For more tips, here's a 5-minute trick to help you fall asleep each night and how to make a chocolate cake in minutes.