This is Jim from Illinois. He always wanted to have a true home "theater" in his house since he was a kid. And not just a home entertainment area.
"To me there is a very distinct difference," he says. "A theater is a dedicated room or area with a true theater-like experience. Not simply a 'home entertainment' area where everyone does daily TV watching or game playing on a flat screen TV (no matter how large the screen is!)."
Once he and his wife knew they were in a house they'd be for many years raising kids, he got the bug and the wheels started turning. After he completed the basement build-out, he started planning the theater. This is the finished product, but it took a lot of work to get there. And he did most of it himself...
Let's go back several years, to when it all began. In this shot he's started prepping the section of the basement where the theater will go. The space is approximately 12 feet by 14 feet. The framing on top is where the projector will be housed.
Jim says: "I knew I wasn't going to be able to spend tens of thousands of dollars on this so I wanted to prove a point that you can have a true home theater on a relatively low budget and still get an awesome picture and booming sound. Most people overdo it with monster amps, giant floor speakers and tons of equipment. For small areas like this, it isn't necessary, except for showing off!"
Jim says he knew he initially wanted to keep things simple and kid-proof. So he didn't get fancy leather furniture and made doors to cover the speakers and the projector "to keep them from getting damaged from a flying hockey stick or toy of some kind."
He made a last-minute decision to add walls to the area and had no idea what he was getting himself into. Since he had storage cabinets in the theater area that housed holiday decorations, including a Christmas tree, for much of the year, the walls couldn't be permanent. He says he had to design his own way to pivot the walls without using ugly hinges or damaging the oak columns.
"I used some threaded pins I found at the hardware store, notched out the 2 x 2 wood framing and secured with a steel mending plate," he says. "I had to be sure the doors would not rub against the columns when opening or closing."
Getting ready for the final stage of updates. Over the years he added the wall sconces, removed the speaker doors, added oak columns and trim and made storage cabinets as a dad-son project a few years ago.
Doors almost done. He used a lighter brown paneling board instead of drywall to help keep the total weight down. While the doors have to be light, he reinforced them with horizontal 2 x 4's for support.
"Since I was going to hang heavy poster frames the wood is at the points where the frames would hang, making for a strong hanging point," he explains.
He wanted to complement the theater logo he designed (and cut out of wood) for the entrance marquee with a logo inside the theater. He decided to try 3D printing for this as the wood cuts were a bit complex for the tools he had.
He had the new logo pieces 3D printed locally from a template he made. He then finished them with a drywall patch as the 3D-printed surface ended up not being smooth.
All finished, it's time to roll out the red carpet! The marquee letters were all hand made. "Yes, it did take a long time to do all this," Jim says. "My sister is a seamstress and made the curtains from the velvet-like fabric I scored on clearance."
View with the walls open. They latch in place to hold them solid when closed. Curtain is removable. This arrangement opens up the room to make it easy to move things in and out of it. It also allows more people to view the screen if Jim has guests over.
Viewing with the lights on. You can see one of the original metal movie reel transport cases on the floor as decoration. "People, including me, don't realize just how heavy three reels of 35mm film are!" Jim says.
Jim says he bought these side tables on sale during the holidays from Menards Home Improvement and also found a plastic drink holder in the store's automotive section that was designed to fit in the seat gap of an automobile. "I cut the bottom portion off then screwed it to the front of the table," he says. "Cheap drink holders!
He bought this old DeVry projector at a flea market. He disassembled it, then cleaned it, repainted it and then put it back together. While he made it non-functional, he says it makes a great decoration.
The intermission sign was something he saw online but was one of those distressed looking signs -- and smaller. Since he'd done some cartooning in the past, he used Adobe Illustrator to make his own style of the sign and had it printed up on light gauge aluminum from signs.com.
Notice the wall connectors near the bottom: They have auxiliary connections that allow him -- or his kids -- to easily hook up a video game console or other device without having to play around with the receiver directly. An HDMI switcher in the cabinet allows for switching HDMI inputs.
At the same place he found the small DeVry projector someone was selling two three-reel cases of an old 35mm movie for $70 total. This is a real 35mm theater movie that was made back in 1969 called Wilderness Calling, a film so minor it's not even listed on IMDB.
"Needless to say, I wasn't too upset about cutting up some film from one reel to put in between the reels for decoration," Jim says. "I used some steel mending plates and some 1-1/2 inch pins for the wall pivots to make a simulated movie projector mechanism for the film to pass through."
Home-theater tech signs at the entrance. Online, Jim found a few people who did these types of printed signs but their printing files didn't work for him so he used Photoshop to work with the chromed logo and text, added a different background and additional text. Mounted in inexpensive frames for "a nice space filler above the poster."
Speakers are housed in the screen framing. He bought speaker cloth online, built a wooden frame that he stretched the cloth over and secured. He then bought some friction pins and mounted them in the wall and frame. That allows him to take the covers off to clean out enclosures.
As far as home-theater equipment goes, Jim wanted to keep things simple and inexpensive. He has just a receiver, Blu-ray player, satellite box and HDMI switch for the external wall-mounted auxiliary inputs. The small CRT monitor at the bottom was connected to the security cameras at one point. The devices are controlled by a powered IR repeater. That makes it easy to point the programmable remote (Logitech Harmony 650) at one IR receiver at the top of the cabinet and control all devices.
This is his equipment list:
Projector: Sony VPL-HS20 Receiver: Yamaha HTR-5590 Blu-ray player: Sony BDP-S3100 Video Source: Dish Network, Wireless Joey paired to a 16-tuner Dish Hopper 3
Front Speakers: Klipsch SB-2 bookshelf Center: Infinity Subwoofer: Klipsch KSW-10