CNET también está disponible en español.

Ir a español

Don't show this again

Morgan Motor Company

In a small factory in the west of England, Morgan Motor Company has been making vehicles for over 100 years. Here's a look behind the scenes. 

For the full story behind this tour, check out Classic of classics: how Morgan Motor Company still makes their wooden wonders.

Published:Caption:Photo:Geoffrey Morrison/CNETRead the article
1
of 51

Starting line

The factory is unassuming, with just a series of low brick buildings on a small site.

Published:Caption:Photo:Geoffrey Morrison/CNETRead the article
2
of 51

Hints at beyond

Finished cars await storage and shipping, and give us a taste of what's to come.

Published:Caption:Photo:Geoffrey Morrison/CNETRead the article
3
of 51

Last of the V8 roadsters?

With only a few months of production left on the BMW V8 Morgan uses in the Plus 8, the hunt for a new, more emissions friendly, replacement is on. Tour guide Kevin thinks it might be a straight 6. My bet, based on pure speculation, is a turbo V6. 

Published:Caption:Photo:Geoffrey Morrison/CNETRead the article
4
of 51

Trikes

Two of Morgan's popular 3 Wheelers, ready for their owners. 

Published:Caption:Photo:Geoffrey Morrison/CNETRead the article
5
of 51

On a slope

The factory is built on a slight slope, which they use to their advantage to move rolling, but unpowered, chassis from one building to the next. 

Published:Caption:Photo:Geoffrey Morrison/CNETRead the article
6
of 51

Some legends

Before we enter the factory proper, we get to check out some important Morgans in their design studio.

Published:Caption:Photo:Geoffrey Morrison/CNETRead the article
7
of 51

Le Mans

Morgan has competed several times in the 24 Hours of Le Mans, including this very car in 2004.

Published:Caption:Photo:Geoffrey Morrison/CNETRead the article
8
of 51

4 seats

A somewhat rare 4-seat Morgan. 

Published:Caption:Photo:Geoffrey Morrison/CNETRead the article
9
of 51

3 Wheeler

A prototype of the upcoming all-electric 3 Wheeler, due out in late 2018.

Published:Caption:Photo:Geoffrey Morrison/CNETRead the article
10
of 51

EV3

A 34.8kW motor and an 8 second 0-62 time is expected, with a 120 mile range from a 21KWh battery.

Published:Caption:Photo:Geoffrey Morrison/CNETRead the article
11
of 51

Aero

The Aero 8 was lunched in 2000, featuring an updated look and overall design for the new century. 

Published:Caption:Photo:Geoffrey Morrison/CNETRead the article
12
of 51

Plus 4 Plus

An extremely rare Plus 4 Plus, with a fiberglass body wrapping a Plus 4 chassis. 

Published:Caption:Photo:Geoffrey Morrison/CNETRead the article
13
of 51

Factory

The first building you enter on the tour is one of the main assembly buildings. 

Published:Caption:Photo:Geoffrey Morrison/CNETRead the article
14
of 51

Aluminum/aluminium

Morgan's vehicles aren't entirely made of wood, that's a common misconception. They have many wood sections, as we'll see. Their chassis is aluminum, which is manufactured nearby for Morgan.  

Published:Caption:Photo:Geoffrey Morrison/CNETRead the article
15
of 51

Aero or 4?

You can tell the Aero from the classic 4 chassis by the rear. The Aero has a square back, the 4 and its various versions have a slope.

Published:Caption:Photo:Geoffrey Morrison/CNETRead the article
16
of 51

BMW

The V8 Morgans use this, a 4.8L BMW V8 with 367hp. A Morgan badge gets attached over the BMW logo, though they don't hide where it's from in any literature. 

Published:Caption:Photo:Geoffrey Morrison/CNETRead the article
17
of 51

Underneath

The simple, but effective, sliding pillar suspension and live rear axle. 

Published:Caption:Photo:Geoffrey Morrison/CNETRead the article
18
of 51

Engines in a row

Some engines await install. Cars can roll down this ramp to enter the next building and stage of production.

Published:Caption:Photo:Geoffrey Morrison/CNETRead the article
19
of 51

Rolling chassis

A close up of a rolling chassis, awaiting some bodywork. Conveniently, that's our next stop. This is a Plus 8, I believe. 

Published:Caption:Photo:Geoffrey Morrison/CNETRead the article
20
of 51

Put your clothes on

Once the mechanical bits get sorted in the previous building, they get wrapped in the curvy outside parts. These are largely made by hand.

Published:Caption:Photo:Geoffrey Morrison/CNETRead the article
21
of 51

Squeezed in

A fairly tight fit for the 4.8L V8 in this Plus 8.

Published:Caption:Photo:Geoffrey Morrison/CNETRead the article
22
of 51

Not all the same

There are four engine choices for the "traditionally styled" cars. Though they look very similar, they're not identical. The width changes slightly with the engine displacement. So the Plus 8 is the widest, the 1.6L 4/4 is the narrowest. The easiest way to tell is by looking at the distance between the headlights and the grill.

Published:Caption:Photo:Geoffrey Morrison/CNETRead the article
23
of 51

There's the wood

Now you can start seeing how much wood is actually used. We'll see more about this in the woodshops a bit later.

Published:Caption:Photo:Geoffrey Morrison/CNETRead the article
24
of 51

Rollers

The fenders, aka "wings" and the hood, aka "bonnet" are rolled by hand for each car by skilled craftsmen using these machines.

Published:Caption:Photo:Geoffrey Morrison/CNETRead the article
25
of 51

Ready to ride... sort of

When the cars leave this building they're officially "rolling chassis." You could, in theory, get in and drive them. In fact, that's exactly what they do to get the cars to the paint shop across the way. Before we get there, though, we're going to take a step back.

Published:Caption:Photo:Geoffrey Morrison/CNETRead the article
26
of 51

Coachbuilding

While the chassis is aluminum, the body is a mix of wood and aluminium. In this building and the next, they build the structure to support the exterior body panels.

Published:Caption:Photo:Geoffrey Morrison/CNETRead the article
27
of 51

Hand crafted

When Morgan says built by hand, this is what they mean. All modern cars are built with some hands-on stages (some less than others), but Morgan certainly does this to the extreme. Old school indeed.

Published:Caption:Photo:Geoffrey Morrison/CNETRead the article
28
of 51

Aluminum and ash

An example of the handiwork. Ash, with aluminum supports.

Published:Caption:Photo:Geoffrey Morrison/CNETRead the article
29
of 51

Woodshop

Here's where the curves and laminates get made.

Published:Caption:Photo:Geoffrey Morrison/CNETRead the article
30
of 51

Curvy fenders

That curve that creates the shape for the wheel wells (upside down here), isn't cut that way. Instead, it's a bent multilayer laminate.

Published:Caption:Photo:Geoffrey Morrison/CNETRead the article
31
of 51

In a vice

Three thin layers of ash are bent to the shape desired, then glued together and secured in the form. 

Published:Caption:Photo:Geoffrey Morrison/CNETRead the article
32
of 51

Curvaceous

Once the adhesive dries, usually in under an hour, the resulting curve is strong enough for car duty.  

Published:Caption:Photo:Geoffrey Morrison/CNETRead the article
33
of 51

Stations

Pretty much everything on the car that's not metal or leather gets made here.

Published:Caption:Photo:Geoffrey Morrison/CNETRead the article
34
of 51

Vacuum

For certain parts, like the dashboard, a vacuum sealing process secures pieces firmly while adhesive seals them together.

Published:Caption:Photo:Geoffrey Morrison/CNETRead the article
35
of 51

Stages

The block of wood and the dashboard topper that gets made from it.

Published:Caption:Photo:Geoffrey Morrison/CNETRead the article
36
of 51

Pieces at the ready

If you order a Morgan, you can have the interior trim and parts look pretty much however you want.

Published:Caption:Photo:Geoffrey Morrison/CNETRead the article
37
of 51

Paint shop pro

After the cars get to the rolling chassis stage, they get driven across to the paint shop. Amazingly, the cars get completely disassembled at this stage, in order to make sure every part gets a full covering of paint.  

Published:Caption:Photo:Geoffrey Morrison/CNETRead the article
38
of 51

Interior decorating

The other main ingredient for a Morgan is leather, or a leather substitute if you want. Nearly the entire interior is covered in it.

Published:Caption:Photo:Geoffrey Morrison/CNETRead the article
39
of 51

Final assembly

As the car gets its interior finished, most of the bits that came off to get painted don't get put on until after everything is done. This is to minimize the chance for scratches. Here some parts await a maroon car that's nearly finished.

Published:Caption:Photo:Geoffrey Morrison/CNETRead the article
40
of 51

Finishing touches

All the pieces go on, all the bolts and nuts get tightened. At this point, the Morgan is just about ready to go.

Published:Caption:Photo:Geoffrey Morrison/CNETRead the article
41
of 51

Inspection

Super bright florescent lights bathe the inspection bays with light, so the techs can find any issues or imperfections now, before the cars ship.

Published:Caption:Photo:Geoffrey Morrison/CNETRead the article
42
of 51

Undercarriage

Every part gets checked and rechecked. Note how the underside is largely covered on this Aero 8. 

Published:Caption:Photo:Geoffrey Morrison/CNETRead the article
43
of 51

Chassis

Some 3 Wheeler chassis. Wonder where we're headed next...

Published:Caption:Photo:Geoffrey Morrison/CNETRead the article
44
of 51

Trikes

Across from the paint shop is the 3 Wheeler assembly building. These are faster to build than the cars, and get their own line. 

Published:Caption:Photo:Geoffrey Morrison/CNETRead the article
45
of 51

Under the skin

The big 2L V-twin gets routed through a Miata gearbox to the rear wheel.

Published:Caption:Photo:Geoffrey Morrison/CNETRead the article
46
of 51

Cozy

It's a tight fit for two, but it sure looks fun.

Published:Caption:Photo:Geoffrey Morrison/CNETRead the article
47
of 51

Museum

The tour finishes in the Morgan museum, which has a few vehicles from their past. This is a replica of one of the earliest models.

Published:Caption:Photo:Geoffrey Morrison/CNETRead the article
48
of 51

French Morgan

A 1923 Darmont-Morgan, which was a Morgan built under licence in France between the wars.

Published:Caption:Photo:Geoffrey Morrison/CNETRead the article
49
of 51

Plus 4

When I finished my tour, this Plus 4 was out front in Sport Green, my favorite color, as if to tempt me. 

Published:Caption:Photo:Geoffrey Morrison/CNETRead the article
50
of 51

Until next time

Renting a Morgan was out of my budget for this trip, but perhaps next time. Sure looks like a comfy place to sit for an open-air adventure...

For the full story behind this tour, check out Classic of classics: how Morgan Motor Company still makes their wooden wonders.  

Published:Caption:Photo:Geoffrey Morrison/CNETRead the article
51
of 51