CNET también está disponible en español.

Ir a español

Don't show this again

Have you been eagerly eyeing-up the Apple Watch Edition and its 24-carat gold body, but can't quite stomach the £8,000 starting price? Well there is a slightly cheaper alternative.

London-based company Goldgenie has developed a method of applying 24-carat gold plating to the mid-range Apple Watch, making it near-identical to its pricier sibling.

It starts at £1,997, making it more affordable than the true Apple Edition watch, and you can spec it up to include python-skin straps and diamond-encrusted casings.

Of course, a gold-plated version of an Apple Watch is not the same as the solid 24-carat gold Watch Edition, hence the significant price difference. The gold-plating on this version can and will wear off after time (something that won't happen with Apple's luxury wearable), although Goldgenie does provide a 2-year warranty against this with each model.

I caught up with the Goldgenie team in its London workshop to see how it applies the gold-plating without destroying the watch itself.

Last year, I saw the team gold-plate the iPhone 6's casing, a process which involved painstakingly removing all the internal components.

Published:Caption:Photo:Andrew Hoyle/CNET
1
of 28

The process begins by cleaning and polishing the watch to remove any dust and dirt which could cause imperfections in the gold.

Published:Caption:Photo:Andrew Hoyle/CNET
2
of 28

Instead of taking the watch apart to apply the gold to only the casing, the engineers spray on a sealant which stops any liquid getting inside.

Published:Caption:Photo:Andrew Hoyle/CNET
3
of 28

The watch is water resistant as standard, but this sealant will help to ensure that absolutely no liquid can seep in.

Published:Caption:Photo:Andrew Hoyle/CNET
4
of 28

An electric current has to flow through the metal in order for it to attract the gold particles.

Published:Caption:Photo:Andrew Hoyle/CNET
5
of 28

The engineer must hold this bulldog clip to the watch at all times during the process in order to maintain the electrical circuit.

Published:Caption:Photo:Andrew Hoyle/CNET
6
of 28

An activator solution is applied to the watch. This essentially makes the metal more porous, allowing the gold plating to adhere properly to the watch.

Published:Caption:Photo:Andrew Hoyle/CNET
7
of 28

The gold is applied. It might look more like a weird cocktail than a pot of gold, but this solution contains 20mg of gold per litre. That's double the amount typically used for gold-plating, Goldgenie explained, which will make the plating more hard-wearing -- an important factor on a device that's likely to be knocked, bumped and rubbed against material quite a lot.

Published:Caption:Photo:Andrew Hoyle/CNET
8
of 28

The gold solution is carefully applied to every part of the metal watch body. It doesn't matter if the solution gets on the screen as it will only actually adhere to the metallic parts.

Published:Caption:Photo:Andrew Hoyle/CNET
9
of 28

Any excess solution is cleaned off.

Published:Caption:Photo:Andrew Hoyle/CNET
10
of 28

It's polished using a sealer which will help protect the gold.

Published:Caption:Photo:Andrew Hoyle/CNET
11
of 28

It lives!

Goldgenie can gold plate up to 20 watches a day.

Published:Caption:Photo:Andrew Hoyle/CNET
12
of 28

Now it's on to the Milanese loop strap. Apple offers special versions of its rubber sport band and leather straps with its gold Edition watch, so the only way you'll get a gold metal Milanese loop strap is by having it plated like this.

Published:Caption:Photo:Andrew Hoyle/CNET
13
of 28

It's first cleaned in a bath that's pulsed with ultrasound.

Published:Caption:Photo:Andrew Hoyle/CNET
14
of 28

Then it's dried...

Published:Caption:Photo:Andrew Hoyle/CNET
15
of 28

...and rinsed off with pure water.

Published:Caption:Photo:Andrew Hoyle/CNET
16
of 28

The clip is again touched to the strap in order to form the electrical circuit.

Published:Caption:Photo:Andrew Hoyle/CNET
17
of 28

The same activator is applied to all parts of the strap to help the gold solution adhere later.

Published:Caption:Photo:Andrew Hoyle/CNET
18
of 28

It's given another rinse.

Published:Caption:Photo:Andrew Hoyle/CNET
19
of 28

The gold is applied to the strap. It's easiest to simply dunk it into the solution...

Published:Caption:Photo:Andrew Hoyle/CNET
20
of 28

...And use the swab to apply more to any parts that didn't get covered properly.

Published:Caption:Photo:Andrew Hoyle/CNET
21
of 28

Yep, that's definitely gold now. It's given a final clean with water.

Published:Caption:Photo:Andrew Hoyle/CNET
22
of 28

And a good drying.

Published:Caption:Photo:Andrew Hoyle/CNET
23
of 28

Then it's all put back together.

Published:Caption:Photo:Andrew Hoyle/CNET
24
of 28

And here's the finished model!

Published:Caption:Photo:Andrew Hoyle/CNET
25
of 28

It's not a bad looking product, and certainly a more affordable way of fooling people into thinking you sprung for the pricey Edition model.

Published:Caption:Photo:Andrew Hoyle/CNET
26
of 28

Goldgenie also have a range of fancy straps to go with the watch, including these coloured python skin designs.

Published:Caption:Photo:Andrew Hoyle/CNET
27
of 28

If your budget extends to £110,000 you can have a gold watch and gold strap, studded all over with diamonds. Here's an iPhone 6, gold-plated, with a diamond-encrusted Apple logo.

Published:Caption:Photo:Andrew Hoyle/CNET
28
of 28
Up Next

Apple Watch Series 4 in pictures: Take a look at Apple's heart-monitoring wearable