CNET también está disponible en español.

Ir a español

Don't show this again

Sabermach founder Jay Chen holding up one of his lightsabers.

Published:Caption:Photo:Aloysius Low/CNET
1
of 16

There are a total of six different hilt designs to choose from.

Published:Caption:Photo:Aloysius Low/CNET
2
of 16

Sabermach's lightsabers are made of anodized aluminum and are designed to be easy to hold with no unessceary protrusions.

Published:Caption:Photo:Aloysius Low/CNET
3
of 16

The lightsabers can be held in one hold, or used in a two handed style.

Published:Caption:Photo:Aloysius Low/CNET
4
of 16

Higher-end sabers feature the ability to flash white when hitting another lightsaber.

Published:Caption:Photo:Aloysius Low/CNET
5
of 16

To prevent the 29-inch long plastic blades from flying apart when dueling, Sabermach lightsabers feature a 1-inch wide thread to securely hold the blades in place.

Published:Caption:Photo:Aloysius Low/CNET
6
of 16

The plastic blades are threaded 1-inch deep to securely fasten the blade to the lightsaber.

Published:Caption:Photo:Aloysius Low/CNET
7
of 16

Don't look directly into the LEDs without the plastic tube attached, as it can be blinding and harmful to your eyes.

Published:Caption:Photo:Aloysius Low/CNET
8
of 16

The bottom cap features the Sabermach logo and can be removed. A special connector can then be attached to link two lightsabers together.

Published:Caption:Photo:Aloysius Low/CNET
9
of 16

Master grade lightsabers also feature the ability to switch colors and have blaster deflection sounds.

Published:Caption:Photo:Aloysius Low/CNET
10
of 16

Expert and Master lightsabers come with cleverly disguised built-in charging ports.

Published:Caption:Photo:Aloysius Low/CNET
11
of 16

The bottoms of all the lightsabers feature Sabermach's logo.

Published:Caption:Photo:Aloysius Low/CNET
12
of 16

All lightsabers will come with a display case. Note the somewhat similar design to the Rebel Alliance logo on the Invigorator, but it's actually not.

Published:Caption:Photo:Aloysius Low/CNET
13
of 16

An unfinished lightsaber has yet to undergo the finishing touches.

Published:Caption:Photo:Aloysius Low/CNET
14
of 16

The prototype Kyrotek lightsaber design should likely interest fans of the upcoming Star Wars movie.

Published:Caption:Photo:Aloysius Low/CNET
15
of 16

If you fancy yourself a dark lord of the sith, well, this could be just the thing.

Published:Caption:Photo:Aloysius Low/CNET
16
of 16
Up Next

5 science mistakes in movies and TV you should unlearn