CNET también está disponible en español.

Ir a español

Don't show this again

Toulouse in southwestern France is where Airbus has its headquarters, and also where the company completes final assembly the A380, the world's largest and most expensive airliner.

After following a convoy of an A380's parts the previous night, we went inside the factory for a tour. 

Published: / Caption: / Photo: Andrew Hoyle/CNET / Read the article
1
of 28

Airbus's 185-acre facility sits on the edge of Toulouse's airport. Though it also builds A350, A330 and some A320 aircraft here, we stuck to section dedicated to the A380. 

In a building as massive as the A380 itself, crews take the airplane's major parts and fasten them together. They also attach the engines and landing gear, outfit much of the interior wiring and systems, and perform tests on the control surfaces. There's space for eight aircraft inside.

Published: / Caption: / Photo: Kent German/CNET / Read the article
2
of 28

As we walked in, we saw an A380 destined for Emirates. Currently the largest A380 operator by far, Emirates now has ordered 142 airplanes, with 96 delivered as of the end of July.

The vertical stabilizer (or tail) and the engine cowlings are two of the few parts that arrive at the factory already painted. The mostly aluminum fuselage, still a pea-soup green at this point, will be painted in Hamburg, Germany after the aircraft's first flight.

Published: / Caption: / Photo: Andrew Hoyle/CNET / Read the article
3
of 28

At this station, crews were attaching the four giant engines, which are made by outside manufacturers such as Rolls-Royce. When we toured on a Friday afternoon, the factory floor was surprisingly quiet with few workers visible. 

Published: / Caption: / Photo: Andrew Hoyle/CNET / Read the article
4
of 28

The adjoining station was empty at the time, letting us take in the building's immense size. 

Published: / Caption: / Photo: Andrew Hoyle/CNET / Read the article
5
of 28

Another A380 nearby was headed for Singapore Airlines. Once the final assembly on an A380 is complete, it's rolled outside where additional work is carried out at one of 12 parking stands.

Published: / Caption: / Photo: Andrew Hoyle/CNET / Read the article
6
of 28

Next we were taken up a stairway behind the aircraft so we could walk inside. As we climbed up, we got a great view of the auxiliary power unit, or APU. It powers the aircraft when the engines aren't running and is used to start the engines before flight.

Published: / Caption: / Photo: Andrew Hoyle/CNET / Read the article
7
of 28

Baggage will eventually be loaded into the hold through this door.

Published: / Caption: / Photo: Andrew Hoyle/CNET / Read the article
8
of 28

We first entered the cabin through one of the lower deck passenger doors. Crews also install the emergency exit slides in each door before each plane leaves the plant.

Published: / Caption: / Photo: Andrew Hoyle/CNET / Read the article
9
of 28

The interior was a far cry from how the cabin would look complete with seats, galleys, lavatories and (for Emirates) the premium class bar. Technicians walked through the cabin making checks with the only light coming from portable stands on the floor.

Published: / Caption: / Photo: Kent German/CNET / Read the article
10
of 28

Next we walked back outside and climbed another flight of stairs to the upper deck. 

Published: / Caption: / Photo: Kent German/CNET / Read the article
11
of 28

As we boarded through a rear upper deck door, I could see almost the full length of the 238-foot fuselage.

Published: / Caption: / Photo: Kent German/CNET / Read the article
12
of 28

Holes for the windows were cut long before the fuselage was shipped to Toulouse. The three fuselage sections are made in Germany and elsewhere in France, the wings in the United Kingdom, and the tailplane (or horizontal stabilizer) in Spain.

Published: / Caption: / Photo: Andrew Hoyle/CNET / Read the article
13
of 28

Being totally empty, the upper deck appeared to stretch on almost forever. After the plane is completed and conducts test flights, it will be flown to Hamburg for installation of the interior fittings and delivery to the customer. If you'd like to buy your own A380 and outfit as you wish, they start at $437 million.

Published: / Caption: / Photo: Kent German/CNET / Read the article
14
of 28

Lining the walls and ceilings are a maze of wires, hydraulic lines, water pipes and ventilation ducts.

Published: / Caption: / Photo: Andrew Hoyle/CNET / Read the article
15
of 28

In Toulouse the cockpit will be outfitted with all the necessary equipment and furnishings necessary to fly the plane. 

Published: / Caption: / Photo: Andrew Hoyle/CNET / Read the article
16
of 28

The 48-foot tail is the only major part of the A380 not to be transported to Toulouse on the truck convoy. Instead, it's flown to the plant in one of Airbus' curious Beluga cargo aircraft. 

Published: / Caption: / Photo: Kent German/CNET / Read the article
17
of 28

Each wing is 150 feet long. I could barely fit it into my wide-angle lens. During final assembly, crews will test operation of the flaps, ailerons and rudder. 

Published: / Caption: / Photo: Kent German/CNET / Read the article
18
of 28

The rudder's surface was so highly polished that it almost disappeared when we viewed it form behind. 

Published: / Caption: / Photo: Kent German/CNET / Read the article
19
of 28

As we climbed down, we got a great view of the tailplane. Raised platforms allow crews to access almost every part of the A380's exterior.

Published: / Caption: / Photo: Kent German/CNET / Read the article
20
of 28

The landing gear is elevated off the ground to allow crews to raise and lower it.

Published: / Caption: / Photo: Andrew Hoyle/CNET / Read the article
21
of 28

Each A380 has 22 wheels to support its weight on the ground. 

Published: / Caption: / Photo: Andrew Hoyle/CNET / Read the article
22
of 28

We also climbed onto a balcony running along the side of the building for a fantastic view.

Published: / Caption: / Photo: Andrew Hoyle/CNET / Read the article
23
of 28

A newly arrived wing, fresh from Airbus's plant in Wales, was resting on the factory floor. All it needed was a fuselage. 

Published: / Caption: / Photo: Kent German/CNET / Read the article
24
of 28

These pylons are used to attach the aircraft's engines to the wing.

Published: / Caption: / Photo: Andrew Hoyle/CNET / Read the article
25
of 28

As we walked out, we passed an A350 undergoing final assembly. Airbus's newest aircraft, it started flying passengers in 2015. To see an A350 in action, check out our photo gallery from the 2017 Paris Air Show.

Published: / Caption: / Photo: Kent German/CNET / Read the article
26
of 28

As it's made of composite materials, the A350 is almost entirely pale yellow. Don't worry, it will look better with an airline paint job. 

Published: / Caption: / Photo: Kent German/CNET / Read the article
27
of 28

Outside the factory was the the convoy we had followed the previous night. By next week, they'll disappear into the factory for final assembly. And about eight months after that, the completed airliner will begin flying with Qatar Airways.

Published: / Caption: / Photo: Andrew Hoyle/CNET / Read the article
28
of 28
Up Next

How to watch every Marvel Cinematic Universe film in the right order