Overscan: You're not seeing the whole picture on your TV

Did you know that by default, most TVs cut off the extreme edges of the picture, zooming it slightly and potentially softening the image? Make sure your TV is showing the entire image it should with this one adjustment.

Geoffrey Morrison Contributor
Geoffrey Morrison is a writer/photographer about tech and travel for CNET, The New York Times, and other web and print publications. He's also the Editor-at-Large for The Wirecutter. He has written for Sound&Vision magazine, Home Theater magazine, and was the Editor-in-Chief of Home Entertainment magazine. He is NIST and ISF trained, and has a degree in Television/Radio from Ithaca College. His bestselling novel, Undersea, and its sequel, Undersea Atrophia, are available in paperback and digitally on Amazon. He spends most of the year as a digital nomad, living and working while traveling around the world. You can follow his travels at BaldNomad.com and on his YouTube channel.
Geoffrey Morrison
4 min read

In this slightly exaggerated image, you can see the full image on the left, and the overscanned image on the right. Geoffrey Morrison/CNET

Your TV is probably trimming the edges of your TV shows and movies. Worse, this trimming means it has to zoom in on the image, potentially decreasing picture quality.

It's an easy thing to fix, and there are basically no downsides to making sure it's set correctly.

Here's what you need to know.

And if you just want to skip past all the history and reasoning, scroll down to the aptly named "How to fix it" section.

Relics of the past

Back in ye olde days of analog TV (those big, boxy CRTs), precision was sorta hard. Where the screen and image ended were a little...variable. As such, broadcasters had extra info along the edges of the screen. If that stuff was exposed, some people would freak out, leading to returns, service calls, and overall annoyance for everyone involved.

So to make everyone's life easier, TV manufacturers designed their sets to "overscan" the screen area. As in, they'd zoom into the image slightly. You'd lose some of the edges of the image, but you'd never see something unintended.

This actually continued into the digital era, where early HD broadcasts (especially live ones) would show things in frame that shouldn't be (mic stands, black bars on the edges of footage, etc).

The problem is, there's very little reason you should have overscan enabled on your TV today, especially if, now that you've read this article, you're aware that very, very infrequently, you might see something on the edge of the screen that shouldn't be there.

The problem

Your TV likely has either 1,920 by 1,080 pixels ("Full HD" 1080p) or 3,840 by 2,160 (Ultra HD or 4K). The signal you're sending it, either from cable/satellite, Blu-ray or some 4K source, is exactly the same number of pixels as your TV (yes, 1080i has the same number of pixels as 1080p).

So if your TV takes that image, and zooms in on it, it has to readjust every pixel to fit. It has to "scale" the image. Even if it does a good job at this, it can't be as good as just leaving the signal be. No matter what, an overscanned image will be softer and potentially noisier than a non-overscanned image. Overscan actually loses you some of the resolution you paid for.

How to fix it

Each TV company has a different place and name for overscan. I can't list them all, but I hope I can give you a few examples so you can find it on your TV.

The most common setting name is called something similar to "Size." It might also be "Wide," "Screen Fill," "Screen Fit," "Aspect Ratio" or "Format."

Annoyingly, once you find the control, the options aren't always labeled well. What you're looking for is 1x1 pixel mapping, which, as it sounds, maps each pixel in the source to each pixel on your TV. Some TVs will label this as "Full," "Fit" or "Dot by Dot." If it's not clear, select each one and see which one shows the most image.

Others TVs, like Panasonic and Sony, have an additional setting you must enable to get 1x1. On many Panasonic TVs, once you've enabled "Full" you also have to select "Size 2" in the settings menu to eliminate overscan. Sneaky.

If you get stuck, the manual (paper or onscreen) probably has the answer.

Bottom line

Is overscan a huge deal? For most people, no. Turning it off will improve the image slightly, with a little better detail, and maybe a little less noise.

If you're using your TV as a computer monitor, overscan is a very big deal. I've had TVs chop off most of the menu bar, and have scaling make text hard to read. Those are extremes, but they give you an idea.

It will only take you a few minutes to find the setting and flip through to see which one shows the most. If you really want to obsess, a setup Blu-ray will have test patterns to show you what you are (or aren't) missing.

Got a question for Geoff? First, check out all the other articles he's written on topics such as why all HDMI cables are the same, LED LCD vs. OLED vs. Plasma, why 4K TVs aren't worth it and more. Still have a question? Send him an email! He won't tell you what TV to buy, but he might use your letter in a future article. You can also send him a message on Twitter @TechWriterGeoff or Google+.