Over time, your TV and sound system might not look or sound as good as it used to. Maybe your TV audio has become muffled, or the, or your . With the holiday travel season about to commence, there's no time like the present to get your living room (sorry, your home theater!) in tip-top shape. Taking care of these issues is easy and doesn't need to cost much money -- in fact, several of the tips are free.
Here are seven tasks to keep your TV andequipment in good shape, ranging from simply picking up a to buying yourself some new gear.
Calibrate TV picture and audio settings
Don't worry, you don't need to wear blue coveralls or own a scientific calculator to calibrate your system. It's easy. Whether you just got your TV out of the box or it's been sitting on your TV stand for years you can always. The first thing you should check within your TV's picture settings is that it's in Movie or Calibrated mode (if available). Vivid mode may look impressive on the shop floor but that's where that monstrosity should stay -- people look orange and a lot of fine detail is lost. If you have an Apple TV you can now of a connected television.
Likewise, getting better sound out of your sound system can be improved with a couple of simple tweaks. If you have a soundbar with a separate subwoofer, for example,could make it sound a lot better. But if you have something a little more involved, like a receiver and speakers, then there's a few more tricks available up your sleeve. Firstly you can always dig out the calibration microphone and run it through its setup process. However, if you've lost the mic you can always do it by hand, . I prefer this latter method as I find it gives better results, especially when it comes to setting the level of the subwoofer.
Clean your TV screen
Home theaters are literal dust magnets with the amount of static electricity flying around -- especially on TVs. Cleaning your system can not only help it look better, but many AV components will work better after a little maintenance: the most obvious being.
If the television has grease spots from fingerprints, use a damp but not wet cloth, or for really stubborn stains use a mild solution of soap and water -- you don't need a specialized screen cleaner. Then wipe it dry with a lint-free cloth. If you're especially short on time you could always breathe on the smudges and use the resulting condensation to polish them off.
The next step is to remove dust around the TV and any associated equipment like anor cable box. While manufacturers do make specialized wipes, a duster or the same lint-free cloth will also work.
If you have devices with cooling fans, these can collect a lot of gunk over time -- cleaning them will help them run better. Buy ato clean these fans efficiently from the outside -- don't open it up -- but make sure to unplug the device first. The "air" can have a lot of moisture in it, and you don't want to risk shorting your equipment.
Hide your TV cables and wires
Cables are the lifeblood of any home theater or TV system, but. Hiding them away not only reduces clutter but also prevents potential tripping hazards.
Cable ties are a cost-effective way to organize the cables leading from the TV to other parts of an AV system. But don't buy single-use plastic ties -- instead get Velcro or wire-based twist ties from bread bags, as these are adjustable.
When running cables together, try to keep AV interconnects and electrical cables separate. That prevents electrical interference, which could result in a degraded audio or video signal. Use the ties to fix the cables along the natural boundaries of AV furniture and walls.
When wall-mounting a TV, you probably don't want a power and HDMI cable dangling down from the bottom. If you don't want to drill holes in your wall, use cable channels that attach to the wall and can be painted to suit your decor. Even better, buy white HDMI and power cables, which will also provide a cleaner look.
If the system includes surround speakers or Ethernet, the cables can go under rugs, along skirting boards, or inside specialized rubber duct covers that run across your floor. Mounting clips can also be used to fix cables to the wall so they don't wander off. As one reader suggests, don't run power cables underfoot.
Buy a surge protector
Consider buying a dedicated surge protector that has enough outlets for all of the system's components. While power conditioners can run into the hundreds or thousands of dollars, you don't necessarily need these.
Plenty of highly rated surge protectors are available from about $30. Look for ones with 10 to 12 outlets. The Belkin Pivot-Plug Surge Protector pictured above has "only" eight, but it also offers space for large "wall wart" power packs, which is another key selling point. CNET's Geoff Morrison also covers the .
Be aware that these devices can't really protect equipment from direct lightning strikes: A small wire fuse can do little to hold back the unrelenting power of Mother Nature. For the same reason, don't worry too much about plugging USB, Ethernet or coaxial cables into your surge protector. That said, some models do offer connected devices warranties and may offer some comfort, but one CNET reader found it was like trying to get blood from a stone when they tried to make a claim.
Wall-mount the TV
Mounting a TV on the wall is one of the easiest ways to reclaim space in a living room, and not only does it look great, but it's really simple to do. (The harder part is hiding the wires, but that's what the aforementioned cable channels are for.) Here's OmniMount is a good starting point when shopping..
Get a new TV stand
If you're using a table or even the floor(!) to house the TV and associated components, it might be time to invest in a dedicated TV stand. Ikea is usually the default, but consider products from specialist companies such as Bell'O, Sanus and Salamander. If you're especially passionate about the look, you could enlist a local cabinet-maker to build something custom.
Here's what to look for:
- Plenty of ventilation
- Integrated cable management
- Shelves with line of sight for remote controls without having to leave doors open
- Enough room for all of the cable boxes, consoles and video streamers
Most TV stands are grouped according to the size of your screen, which helps keep things looking neat, but be aware that if you're using discrete speakers, a really wide AV unit might mean the speakers are too far apart for a convincing stereo effect. In this case, you could mount bookshelf speakers on the unit itself and wall mount the TV.
If you have small children, or particularly boisterous friends, it's a good idea to tether the AV cabinet to the wall as well. Some units come with furniture tethering kits, but if not, these kits are available from places like Amazon or Home Depot for very little money.
Buy yourself some new home theater gear
We're all still spending more time at home, so why not splurge on improving the TV setup? Whether you're looking to buy a new streamer to take advantage of newer video standards or going all out with a brand new system, the possibilities are endless. Here's a list of all of our favorite AV gear from the tiniestto the largest 4K television and everything in between: