We're building a smart garden at the CNET Smart Home.
To celebrate the arrival of spring, we're taking a. We already dove into the , and as the weather warms up, we'll be using smart garden tech to grow tomatoes, bell peppers, lettuce, jalapeños and the infamously spicy Carolina Reapers.
Here's what we set up and how you can use tech to assist you in your own smart garden.
In addition to actually building our garden bed from scratch, the majority of our work went into making a custom-designed smart watering system. Proper watering is the most important aspect of gardening, so we focused on that first and foremost.
We only needed a single smart piece in our smart irrigation setup: the Rainbird, replace the controller for your in-ground sprinkler system.. The Faucet Timer is one of the few options out there for adding smarts to an ordinary garden hose. The , like , and
The B-Hyve Faucet Timer connects to an ordinary outdoor faucet, so it's an easier starting point for most. The "+" part of the name refers to the hub packaged with it. Without the hub, you can only control it with your phone when you're in Bluetooth range. We plugged the hub into an outlet on an interior wall on the other side of the faucet. The hub connects the Faucet Timer to Wi-Fi, allowing control via the app from anywhere.
B-hyve's Faucet Timer allowed me to set up schedules with the app. It also watches the weather and can create schedules on its own. Since the app was designed for sprinkler zones in a yard, it's not perfect for a vegetable garden. You can only customize schedules for different types of grass as opposed to tomatoes and peppers. Still, it's easy to use. Check back later in the week for the full review of the B-hyve Faucet Timer.
With B-hyve in place, we set about delivering the water from our faucet to our garden. We used several pieces to build our own drip irrigation system, each of which you can easily find in any hardware store.
We connected a splitter to the faucet so we could make our drip irrigation permanent and still have access to the hose if we needed it. We connected the B-hyve to the splitter. Then, we attached a backflow preventer and a pressure reducer. We want the water dripping onto the plants, not spraying.
We attached a standard 100-foot garden hose to those pieces and ran it along the wall from the faucet toward our garden. We connected the hose to irrigation supply tubing, and ran that tubing under the ground from the wall to our garden bed. We dug a path for it under our garden bed and then ran it to the surface of the dirt along the upper boundary of where we're planning to put the Carolina Reapers.
We poked four small holes into this last stretch of supply hose, and attached four lines of emitter tubing to the holes. We looped the tubing around the area designated for each plant. We'll give our tomatoes, bell peppers, jalapenos and lettuce a similar amount of water, so we made the loops big enough to include four emitter holes each.
We're going to give the Carolina Reapers a little less water than the rest, so we used smaller loops with only three holes. Varying the size of the loops was an easy way for us to customize watering for different plant needs while still drawing water from the same source.
Finally, we plugged the ends of our emitter tubes and capped the end of the irrigation tubing with a flush adapter so we can rinse the system if we need to. With that, we turned a single smart piece of hardware into a remotely controllable, weather-aware drip irrigation system.
The Orbit B-hyve Faucet Timer+ costs $70, or you can just get the Faucet Timer for $40. All together, the rest of the pieces cost roughly $100 (roughly £70 or AU$130, though they aren't yet widely available in the UK or Australia).
The rest of the smarts
We decided against using a plant sensor, as the B-hyve is smart enough to watch the weather on its own. Also,. As the seasons progress, we'll keep our eyes open for a new good option if we need more refinement. If you want your system to be even more tied into the weather, check out our .
Other than smart watering, CNET's Megan Wollerton has a walk-through for setting up a smart outdoor cam. She used the , a smart outdoor cam that can allow you to watch for pests. If a smart cam detects motion, it could sound an alarm or flash outdoor lights.
An upcoming product called GardenSpace will soon be able to take care of both watering and pest control. It can spray specific spots in a garden plot, and watch for motion and startle pests by dousing them with water. For now, you'll need to take care of watering and pest control separately. Fortunately, you can do both relatively easily.
We'll keep you updated on how our smart garden is doing. Thus far, we've only planted lettuce as it can handle the colder temps. Eventually, we'll plant the rest and we'll be sure to record it when we finally get to try those Carolina Reapers.