Panasonic DMP-BD10A review:

Panasonic DMP-BD10A

Connectivity is also better than other Blu-ray units. The DMP-BD10A is currently the only Blu-ray player with 7.1 analog outputs, which can handle the full resolution of the high-resolution audio soundtracks. If you have an older receiver without HDMI, there's a good chance it has a 7.1 multichannel input so you can still take advantage of Dolby TrueHD and DTS-HD High Resolution.

The DMP-BD10A is the only Blu-ray player with 7.1 analog outputs.

Like other Blu-ray players, the most important connection is the HDMI output that can carry 1080p video signals along with new high-resolution, multichannel surround audio soundtracks. For those without HDMI-friendly receivers and displays, there is also a component-video output, along with an AV output with S-Video. There are also both optical and coaxial digital audio outputs, but note that they cannot carry the high-resolution audio soundtracks.

Forward-thinking buyers also will be quick to note that the DMP-BD10A lacks HDMI 1.3, which is the latest iteration of the HDMI spec. While HDMI 1.3 opens up the possibility for many seemingly worthwhile features--such as the ability to send high-resolution soundtracks in bit stream format and an expanded color gamut--all of the high-def disc players we've seen with HDMI 1.3 have been unable to utilize these upgrades. Until we see players with the HDMI 1.3-enhanced features, we don't consider the lack of HDMI 1.3 to be a big loss.

Blu-ray performance
For those who haven't seen the difference between the new high-def disc formats and DVDs, the increase in image quality is large if you're watching on a big screen HDTV. The enhanced resolution and color saturation over DVDs goes a long way to bring the film experience into your home theater. To see how the DMP-BD10A compared to the competition, we put the DMP-BD10A up against our current reference Blu-ray player, the Samsung BD-P1200. Before we get into the details, the short story is that, like all Blu-ray and HD DVD players we've tested, there is very little difference in image quality between new high-definition disc players--unlike DVD players, where differences in quality are often considerable.

We started off our test looking at Corpse Bride in 1080p on the Pioneer PRO-FHD1 and the Panasonic TH-42PZ700U. This disc is extremely sharp and any difference in detail between the players should be visible. However, with our noses inches for the screen, we found it very difficult to find any significant differences in the image quality between the players. This is even more so the case when watching at a standard viewing distance of around 8 feet for a 50-inch plasma.

We also took a look at Ghost Rider, as we've seen some TVs have issues with 1080i deinterlacing at the very end of Chapter 6, where the camera pans up with the RV in the background. While we've seen TVs struggle with this, both the BD-P1200 and the BDP-BD10A had no problem, as the grille of the RV was correctly rendered and free of moiré.

Lastly, we took a look at some test patterns on Silicon Image's HQV test suite on Blu-ray, in 1080p mode on both players. The DMP-BD10A, like the BD-P1200, didn't have any trouble with the tests, acing even the difficult film resolution tests that we've seen most 1080p HDTVs fail. Like we said before, there's really very little difference in Blu-ray performance among all Blu-ray players.

The Panasonic is still a little slow with load times, but it's a bit faster than previous firmware versions. It took about 30 seconds from the time we hit Close Tray until a picture came up. Other standalone players we've tested came in about 5 seconds faster, while the PlayStation 3 was fastest of all. On the upside, the Panasonic was still significantly faster that the notoriously slow Toshiba HD-A1 HD-DVD player. Also improved in the latest firmware is the responsiveness to chapter skips, which was a little pokey in previous versions. It's still not as fast as the PlayStation 3, but we didn't feel it had a negative impact on our viewing experience.

DVD performance
Since everyone purchasing the DMP-BD10A will have a bigger collection of standard-def DVDs than of Blu-ray discs, DVD upconversion performance is a critical factor. Overall, the DMP-BD10A is a top-notch upconverting player. To start off, we ran through the Silicon Optix's HQV test suite, in each resolution--480p, 720p, 1080i, and 1080p. Beginning with a resolution test, the DMP-BD10A looks as sharp as a DVD can look in every resolution, with 480p being just a smidgen softer. Next up were some motion tests that it passed easily, exhibiting none of the issues we saw on the Philips player. The DMP-BD10A plowed through the rest of the tests, demonstrating lightning-fast

We had noticed in previous firmware versions that the DMP-BD10A exhibited the chroma upscaling error, also known as the "chroma bug", which can look like comblike artifacts in certain colors. However, in the newest firmware (version 2.2), we only saw this behavior on improperly flagged DVDs, which means it should only show up on poorly authored discs.

Moving past the chroma bug, we watched the introduction from Seabiscuit, where the camera movement over black-and-white still photos often gives lesser DVD players problems, especially in the angled lines. The DMP-BD10A handled the section extremely well, and we were reminded just how good DVDs can look when properly upscaled. Like we said before, the DMP-BD10A is an excellent upscaling DVD player and is maybe only a smidgen behind players equipped with HQV processing, like the BD-P1200 and the Toshiba HD-XA2.

What you'll pay

    Visit manufacturer site for details.

    Hot Products


    Discuss: Panasonic DMP-BD10A

    Conversation powered by Livefyre