At first glance, the Harman Kardon SB 16 might seem like a hard sell. It's a $600 sound bar system, which is more expensive than many competitors, and it features a jumbo subwoofer that's sure to rankle those who believe "less is more" when it comes to speaker size. But those doubts are likely to fade away as soon as you take the SB 16 out of the box. Its exterior design and build quality are clearly a cut above the average budget sound bar, and that extra size isn't just for show, as it's a major factor in the Harman Kardon SB 16's excellent sound quality. It may not be for everyone, but the SB 16 is one of the best performance-oriented sound bars we've seen that that doesn't require an AV receiver.
The only factor holding us back from giving the SB 16 a whole-hearted recommendation is a quirk with how it accepts remote commands, which doesn't affect all buyers (more on this later). Still, the Harman Kardon SB 16 is a standout sound bar in terms of sound quality and design, so though it may cost more, you feel like you're getting your money's worth.
The SB 16's sound bar is mostly made of plastic; however, it has a heft (8 pounds) that you just don't find on budget competitors like the Sony HT-CT150 and the Samsung HW-C450. It feels solidly built and we appreciated its muted design aesthetic that doesn't call attention to itself. There is no LCD display on the front panel and just a few buttons on the top. Though the lack of a display gives the SB 16 a cleaner look, the downside is that there's no visual indicator as to how loud the volume is and how much louder the system can go.
The most surprising thing about the SB 16 is the size of the subwoofer. It's huge by sound bar standards, coming in at 18.88 inches high, and 13.38 inches wide and deep, not to mention its 33-pound weight. The large footprint may be a downside for some buyers, especially since many who opt for a sound bar do so to cut down on the size of their home audio system. On the other hand, it's worth remembering that the subwoofer is wireless, so it's easy to position in the corner of a room where it's not so imposing on your decor.
Unlike many sound bar/subwoofer systems, the Harman Kardon SB 16's inputs are located on the back of the sound bar itself, not the subwoofer. That's fine, just be aware that it may increase wire clutter near the base of the TV.
As far as inputs go, there are three: one analog (red/white RCA jacks) and two digital (one optical, one coaxial). That means--if you have more than three audio sources, at least--you'll probably want to use your TV as an input switcher.
Using your own remote (and why that might be a problem)
The SB 16 has essentially one major design hiccup. There's no included remote, which means that the Harman instead relies on you programming the sound bar to respond to commands from your TV remote. The idea is that when you press "volume up" on your TV remote, the SB 16 responds--and the TV doesn't. While Harman's intent is admirable (simplifying to one remote), it doesn't work perfectly with every TV.
The problem is that in our tests, when the TV's internal speaker is deactivated (as Harman recommends) and it receives a volume command, some HDTVs display a message like "TV speaker disabled" on the screen. That means every time you adjust the volume of the SB 16--which may be often, if you like to ride the volume control during movies like we do--you'll see an annoying onscreen message.
We have many HDTVs in our testing facility, so we checked to see how many displayed a message; it wound up being about half. New HDTVs from Sony and Panasonic would display a message, whereas new Samsung TVs did not. (An older Samsung TV did display a message, however.) Luckily, you can easily check your own HDTV to see if it's going to be a problem. Just hop into the Setup menu, turn off the TV's speaker (or set to "external speaker"), and then try to adjust the volume. If you see an onscreen message, the SB 16 might not be the best choice for your system.
Thankfully, the SB 16 does have controls on the unit itself (power, volume, source switcher), so you're not stuck if you do have problems with the remote. That said, we would've preferred a small remote to be included, if only because it would make programming a learning remote (such as a Logitech Harmony) much easier.
The SB 16 doesn't have any speaker calibration setting requirements, but there are sound-tuning adjustments. First, there's a "Trim" switch that sets the input sensitivity in three steps. The unit is shipped with the Trim set to "1," which didn't allow the SB 16 to play loud enough for us, even when the volume control was set to max. Moving the Trim switch to the "2" setting increased the max volume enough so it was loud enough for us. The sound bar also has a "Wall-Table" EQ switch that tunes the speaker's tonal balance for wall or table mounting.