X
CNET logo Why You Can Trust CNET

Our expert, award-winning staff selects the products we cover and rigorously researches and tests our top picks. If you buy through our links, we may get a commission. Reviews ethics statement

Upgrade your MacBook to an SSD (pictures)

A Solid State Drive can seriously boost an old MacBook's performance, speeding up the time it takes to launch programs, complete tasks, and render large files. Here's how to install an SSD on your MacBook Pro.

Sharon Profis
Sharon Profis is a vice president of content.
Sharon Profis
hard-drive-ram-how-to-7528.jpg
1 of 17

So you want to upgrade your Mac with an SSD?

A Solid State Drive can seriously boost an old MacBook's performance, speeding up the time it takes to launch programs, complete tasks, and render large files.

Here's how I upgraded my 2009 MacBook Pro to an SSD and made it feel brand new. Any MacBook Pro from 2012 and earlier can be upgraded as well. (Newer models have the hard drive soldered in and can not be modded.)

hard-drive-ram-how-to-7550.jpg
2 of 17 James Martin/CNET

Connect the SSD to your Mac

The first step is to clone your current hard drive to the SSD. Start by connecting the SSD to your computer with a SATA-to-USB dock or cable.

screen-shot-2014-09-30-at-2-03-27-pm.png
3 of 17 Sharon Profis/CNET

Format the SSD

To prep the SSD for cloning, you'll have to format it. Launch Disk Utility and select the SSD from the sidebar. Then head over to the Erase tab and click Erase. Now your drive is ready for cloning.

screen-shot-2014-09-30-at-2-02-44-pm.png
4 of 17

Cloning the hard drive to the SSD

To clone to drive, launch SuperDuper, which is completely free. Set it up to clone the Macintosh HD to your new drive. Select Backup - all files. Click Copy Now, and take a break. This could take up to a few hours, depending on the size of your drive.

hard-drive-ram-how-to-7517.jpg
5 of 17 James Martin/CNET

Remove the back cover

When the hard drive finishes cloning, disconnect it, and shut down your computer.

Using a screwdriver, remove the 10 small screws securing the bottom cover. Keep them safe in a small container as you disassemble.

hard-drive-ram-how-to-7525.jpg
6 of 17 James Martin/CNET

Ta-da!

Remove the back cover and touch a metal part on the inside to release the static electricity.

At this point, you might want to clean the dust that's collected on the innards of your laptop. Use a soft brush or gentle bursts of compressed air to get the job done.

hard-drive-ram-how-to-7546.jpg
7 of 17 James Martin/CNET

Remove the hard drive

To remove the hard drive, unscrew the two screws holding down the black bracket. Set the bracket and the screws aside.

hard-drive-ram-how-to-7542.jpg
8 of 17 James Martin/CNET

Disconnect the hard drive

Gently lift the hard drive. You'll see that a ribbon is attached to one end. Carefully wiggle the connector -- not the ribbon itself -- to disconnect it.

hard-drive-ram-how-to-7539.jpg
9 of 17 James Martin/CNET

Remove torx screws from hard drive

Remove the four torx screws attached to the hard drive and set them aside. You'll need a torx-head screwdriver for this part.

hard-drive-ram-how-to-7541.jpg
10 of 17 James Martin/CNET

Remove the tape

There's a handy little piece of tape attached to the hard drive. Remove that and reserve it for your SSD -- it'll help you easily remove the SSD in the future.

hard-drive-ram-how-to-7532.jpg
11 of 17 James Martin/CNET

Bye-bye, hard drive

At this point, you can store your hard drive away or turn it into an external hard drive.

hard-drive-ram-how-to-7538.jpg
12 of 17 James Martin/CNET

Grab your SSD

It's time to install the SSD. For my project, I used Samsung's 740 Evo. This year's model is the highly-rated Samsung 840 Evo.

hard-drive-ram-how-to-7537.jpg
13 of 17 James Martin/CNET

Replace the torx screws

Replace the four torx screws you removed from the old drive.

hard-drive-ram-how-to-7536.jpg
14 of 17 James Martin/CNET

Adhere the tape

Adhere the tape you removed from the old drive, which will make it easy to remove the SSD in the future.

hard-drive-ram-how-to-7535.jpg
15 of 17 James Martin/CNET

Attach the connector to the SSD

Carefully reattach the connector. Always grab it by the connector, not the ribbon.

hard-drive-ram-how-to-7533.jpg
16 of 17 James Martin/CNET

Secure the bracket and replace the cover

Finally, secure the bracket and replace the bottom cover.

hard-drive-ram-how-to-7529.jpg
17 of 17 James Martin/CNET

Take the SSD for a spin

You're set! Turn on your computer, and give it a few moments while it gets acquainted with your new drive. If you did everything correctly, your computer will launch as usual, but it will perform a whole lot better.

Check out the video and blog post for this Mac Monday project.

More Galleries

My Favorite Shots From the Galaxy S24 Ultra's Camera
A houseplant

My Favorite Shots From the Galaxy S24 Ultra's Camera

20 Photos
Honor's Magic V2 Foldable Is Lighter Than Samsung's Galaxy S24 Ultra
magic-v2-2024-foldable-1383

Honor's Magic V2 Foldable Is Lighter Than Samsung's Galaxy S24 Ultra

10 Photos
The Samsung Galaxy S24 and S24 Plus Looks Sweet in Aluminum
Samsung Galaxy S24

The Samsung Galaxy S24 and S24 Plus Looks Sweet in Aluminum

23 Photos
Samsung's Galaxy S24 Ultra Now Has a Titanium Design
The Galaxy S24 Ultra in multiple colors

Samsung's Galaxy S24 Ultra Now Has a Titanium Design

23 Photos
I Took 600+ Photos With the iPhone 15 Pro and Pro Max. Look at My Favorites
img-0368.jpg

I Took 600+ Photos With the iPhone 15 Pro and Pro Max. Look at My Favorites

34 Photos
17 Hidden iOS 17 Features You Should Definitely Know About
Invitation for the Apple September iPhone 15 event

17 Hidden iOS 17 Features You Should Definitely Know About

18 Photos
AI or Not AI: Can You Spot the Real Photos?
img-1599-2.jpg

AI or Not AI: Can You Spot the Real Photos?

17 Photos