How Lego makes its bricks (photos)
Road Trip 2011: They may be the most popular toy on Earth, and watching them get produced in Lego's home town is a rare treat.
Mini-figures with suit and tie
BILLUND, Denmark--If you're a Lego fan like me, visiting this little town in western Denmark is a little like making a religious pilgrimage.
That's obviously an overstatement, but this is the home of Lego, maybe the world's most famous toy, and as part of Road Trip 2011, I got a chance not only to visit the company's headquarters but also to see the production, processing, and packaging of the famous bricks.
The whole process is actually quite simple. Making the bricks involves injecting very hot plastic into a mold and pressing it. Cool it a bit, open the mold, and out drops Lego bricks.
This is from the second part of the process, when bricks and other elements--such as these soon-to-be mini-figures--are finished by adding any additional parts, like legs, arms, and heads, and having anything they need printed on, like a suit and tie.
Please visit the Road Trip 2011 page for all the coverage from CNET reporter Daniel Terdiman's travels through Europe.
This is the reception at Lego's world headquarters. Note the way the ceiling and the chairs make up what appears to be two interlocking Lego bricks.
Please visit the Road Trip 2011 page for all the coverage from CNET reporter Daniel Terdiman's travels through Europe.
ABS plastic
All Lego bricks are made from the same ABS plastic. It comes to Lego from suppliers and is held in giant silos. Generally it is clear or red, and the color for specific bricks is added at the molding machine. This is a bin full of ABS plastic, with some additional colors mixed in.
Please visit the Road Trip 2011 page for all the coverage from CNET reporter Daniel Terdiman's travels through Europe.
Mold cross section
This is a cross-section of a Lego brick mold. First, very hot plastic is injected into the mold on the right side. It then spreads through little channels and is then pushed into the press area of the mold through very small slits. When cold water is then flushed through the mold, it cools down the plastic, and the mold opens, allowing the bricks to snap off and drop down onto a belt below.
Please visit the Road Trip 2011 page for all the coverage from CNET reporter Daniel Terdiman's travels through Europe.
Many molds
Currently, there are about 7,000 active molds being used at Lego. All told, it keeps about 9,000 around, with many stored on shelves like this one. The average mold is worth $72,000, with the most valuable coming in around $360,000.
Please visit the Road Trip 2011 page for all the coverage from CNET reporter Daniel Terdiman's travels through Europe.
Plastic injected
Here, we see where the plastic is injected into the press area of the mold.
Please visit the Road Trip 2011 page for all the coverage from CNET reporter Daniel Terdiman's travels through Europe.
Ellipsoid pieces in the mold
Here we see two ellipsoid pieces that have just been pressed, still sitting in the mold. In a second, they will drop off and onto a belt below.
Please visit the Road Trip 2011 page for all the coverage from CNET reporter Daniel Terdiman's travels through Europe.
The ellipsoid mold
Here we see the mold for the ellipsoid pieces from the previous picture. Note the shape of the mold.
Please visit the Road Trip 2011 page for all the coverage from CNET reporter Daniel Terdiman's travels through Europe.
Blue heads
Part of Lego's system is to be as efficient as possible. That means making bricks and other elements that can be used in different ways. These blue pieces can either be used as heads for mini-figures, or as decorations for other pieces.
Please visit the Road Trip 2011 page for all the coverage from CNET reporter Daniel Terdiman's travels through Europe.
Purple pieces
Thousands of purple Lego bricks sit in a bin, having just been pressed in a mold.
Please visit the Road Trip 2011 page for all the coverage from CNET reporter Daniel Terdiman's travels through Europe.
Long aisle of molding machines
This is one of 12 molding 'modules' located in Billund. Each module, or room, has as many as 64 working molding machines, divided into two aisles of 32 machines each.
Please visit the Road Trip 2011 page for all the coverage from CNET reporter Daniel Terdiman's travels through Europe.
Grabbing injection waste
Here we see a robot arm inside the molding machine grabbing the waste from the injection and molding process. This plastic will be put into a grinder, and reused almost immediately.
Please visit the Road Trip 2011 page for all the coverage from CNET reporter Daniel Terdiman's travels through Europe.
Bin of waste
This is a bin full of the waste plastic from each mold.
Please visit the Road Trip 2011 page for all the coverage from CNET reporter Daniel Terdiman's travels through Europe.
Spillage
Almost none of the plastic used in the Lego factory goes to waste, but a very small amount does get spilled. This giant bin is full of spaghetti-like plastic that has hardened and has no use.
Please visit the Road Trip 2011 page for all the coverage from CNET reporter Daniel Terdiman's travels through Europe.
Colored tubes
These tubes carry ABS plastic into the molding rooms. The sound coming from the pipes is very much like what millions of grains of rice would sound like going through pipes.
Please visit the Road Trip 2011 page for all the coverage from CNET reporter Daniel Terdiman's travels through Europe.
Cleaning a mold
A mold is used for about four weeks before it is pulled from the production line and completely cleaned out. Here, we see a Lego worker doing a meticulous cleaning of a mold.
Please visit the Road Trip 2011 page for all the coverage from CNET reporter Daniel Terdiman's travels through Europe.
Dropping mini-figure bodies
Now in the processing part of the production system, this machine is dropping torsos for mini-figures onto a belt where they will have additional elements like arms and legs and heads added to them.
Please visit the Road Trip 2011 page for all the coverage from CNET reporter Daniel Terdiman's travels through Europe.
Putting hands on mini-figures
Here we see a small robot adding hands to a mini-figure.
Please visit the Road Trip 2011 page for all the coverage from CNET reporter Daniel Terdiman's travels through Europe.
Stamping on details
Here we see the machine stamping on printed details, such as a face, and a shirt.
Please visit the Road Trip 2011 page for all the coverage from CNET reporter Daniel Terdiman's travels through Europe.
Weighing
This display shows the weight of a small bag of Lego bricks known as a pre-pack. The weight must be between 94.9 grams and 95.7 grams. Coming in at 94.94 grams, this back passes muster. However, as the display shows, five bags came in too light, and one was too heavy. But 5,354 were in the target range.
Please visit the Road Trip 2011 page for all the coverage from CNET reporter Daniel Terdiman's travels through Europe.
Going up the belt
Here we see pre-packs going up a conveyor belt, at the top of which they will be weighed.
Please visit the Road Trip 2011 page for all the coverage from CNET reporter Daniel Terdiman's travels through Europe.
Putting in bags by hand
Now in the packaging department, most of the bricks are in packs that are dropped into a package automatically. But some of the packs are too big to fit in when dropped that way and must be shaken and flattened manually in order to fit properly.
Please visit the Road Trip 2011 page for all the coverage from CNET reporter Daniel Terdiman's travels through Europe.
Flat Star Wars boxes
These are hundreds of flat boxes for Star Wars Lego sets.
Please visit the Road Trip 2011 page for all the coverage from CNET reporter Daniel Terdiman's travels through Europe.
Making sure not too full
This machine presses down into each Star Wars set that passes through to make sure that the packs of Lego bricks inside isn't too high up. If it is too high, the box may not be able to be closed correctly.
Please visit the Road Trip 2011 page for all the coverage from CNET reporter Daniel Terdiman's travels through Europe.
Full Star Wars boxes go down the line
Here we see full Star Wars boxes moving down the line.
Please visit the Road Trip 2011 page for all the coverage from CNET reporter Daniel Terdiman's travels through Europe.
Closing lids
Here, the machine automatically closes the lid of the box of each Star Wars Lego set.
Please visit the Road Trip 2011 page for all the coverage from CNET reporter Daniel Terdiman's travels through Europe.
Full boxes coming off the line
Here we see full and closed Star Wars Lego set boxes coming off the packaging line.
Please visit the Road Trip 2011 page for all the coverage from CNET reporter Daniel Terdiman's travels through Europe.
Putting Star Wars sets in boxes
As the Star Wars sets are finished, this machine grabs two at a time and puts them into cases of six.
Please visit the Road Trip 2011 page for all the coverage from CNET reporter Daniel Terdiman's travels through Europe.
Pulling out a mistake
Here, a Lego worker has to reach inside the machinery and grab two boxes that have accidentally been spun off the belt.
Please visit the Road Trip 2011 page for all the coverage from CNET reporter Daniel Terdiman's travels through Europe.
Boxes of six
Each of these cases contains six Star Wars Lego sets.
Please visit the Road Trip 2011 page for all the coverage from CNET reporter Daniel Terdiman's travels through Europe.
Ready to go
Shrink-wrapped and ready to go, these cases of Star Wars Lego sets will be shipped to the Czech Republic, where they will be handled by a giant distribution center there operated by DHL for Lego.
Please visit the Road Trip 2011 page for all the coverage from CNET reporter Daniel Terdiman's travels through Europe.