Going on tour at Bowers & Wilkins (pictures)
A picture tour of B&W's Worthing, England, speaker-manufacturing facility.
A warning
Oh, the risks I take for a good story.
Factory floor
The main factory floor. In the foreground are the final finishing stages for the $24,000/pair 800-series speakers.
Driver?
Care for a few drivers?
800 waiting
Here are some partially finished 800-series speakers, awaiting many of the components we'd see later in the tour.
Testing
This machine breaks things on purpose, so the engineers can see which and how parts break. Check out this video of the machine in action (destroying a woofer driver).
Strong drivers
To demonstrate the strength of the drivers, B&W's Peter Paice stands on one.
The sound of silence, uh, I mean science
B&W's anechoic chamber.
Weather and more
Since B&W makes outdoor speakers, it's not surprising it has equipment to stress test gear with increased heat, humidity, and other factors. Despite being on the ocean, it even has a machine to test for saltier conditions.
The sandwich
This multilayered sandwich is many layers of wood with glue in between. This is actually the makings of a speaker cabinet, thanks to the machine in the next slide...
Compression
The sandwich is compressed with this machine, molding it to the shape you see on the left (it's curved in multiple dimensions). Check out this video to see the machine in action.
After
After the machine squishes the sandwich for 20-30 minutes, a robot rotors away the excess, leaving the incredibly rigid and curvy panels you see here. These are tops of some small tower speakers.
Other pieces
This same process is used to form larger speaker cabinet parts, like the back and side piece you see here. This requires a larger machine, which you can see in action here.
Before and After
The finished part on the left, the raw sandwich on the right.
Composites
Though the majority of the speakers are made from wood, the distinctive teardrop midrange enclosure on the 800 Series Diamond is a dense composite material that is incredibly heavy. The unfinished enclosures arrive at B&W, where they're sanded extensively to get a smooth surface.
Drops
Once sanded, they're painted. That's not the end of their journey, though.
Paint booth
One of the paint booths. It's rather Kubrickian, right?
Black is tough
One entire floor of B&W's facility is devoted to just black finishes. This is because to get a smooth, high-end, piano-black finish, the environment has to be clean, and many, many additional steps must be taken. Otherwise, the end result has a lumpy "orange peel" like finish. This is fine for many speakers, but for expensive speakers, not so much. Here, many different speakers await further fiddling.
Back to matte
Once painted with many layers of black paint, the speakers are actually sanded down to the finish you see here. Then...
Polishing
... they're polished and polished and polished until the speakers are smooth and shiny.
Nautilus
Some speakers, like the big Nautilus here, are polished by hand for two days. Each.
Finish
As you can see in this closeup, the end result is smooth.
Painters
Here, 800 Series cabinets get rotated in for the robot paint sprayer you'll see in the next slide.
Painter
The robot paint sprayer. I assume it never gets bored.
Drivers
Some of the high-end speakers get hand-wound voice coils, made in-house. Shelves around this area were stacked with what I assume was tens of thousands of dollars of copper wire, of many different thicknesses.
Spider and coil
Here the voice coils (the copper wires) are mated with a spider (the yellow part).
Diamonds are forever
This is a close-up of one of B&W's diamond dome tweeters. They're incredibly rigid, but also incredibly thin.
Tweeter assembly
Here the diamond domes are mated with the many pieces needed to become actual tweeters. The end result is the long tweeter top you see sitting on the top of some B&W speakers. These are put together almost entirely by hand.
Kevlar
Discs of Kevlar are stamped to form a cone shape. A different station applies a gluelike material that fills in the holes and brings the drivers up to an exact weight.
More hand crafting
I'm not sure a machine could do a better job than this. She's assembling the cover that goes between the top of the 800 speaker cabinet and the teardrop enclosure you saw 20 slides ago. While no consumer will ever see the underside of these, as you'll see in the next side, they're immaculately put together.
Precision
That's some fantastic craftsmanship for an area probably not seen by most people.
Assembly
Here the massive crossover network is mounted in the base of an 800. After some final assembly here, and some testing, the speakers are pretty much ready to ship out.
Warehouse
Lots of boxes.
The sounds
In the first of two listening rooms (the other was a larger theater), I got to take a listen to a few cuts with the 800 Diamonds and some Classe electronics. Beautifully clean treble, accurate and tight bass, a big soundstage that you could still localize instruments in. Simply fantastic. These are the same speakers used at Abbey Road Studios.
More Galleries
My Favorite Shots From the Galaxy S24 Ultra's Camera
My Favorite Shots From the Galaxy S24 Ultra's Camera
20 Photos
Honor's Magic V2 Foldable Is Lighter Than Samsung's Galaxy S24 Ultra
Honor's Magic V2 Foldable Is Lighter Than Samsung's Galaxy S24 Ultra
10 Photos
The Samsung Galaxy S24 and S24 Plus Looks Sweet in Aluminum
The Samsung Galaxy S24 and S24 Plus Looks Sweet in Aluminum
23 Photos
Samsung's Galaxy S24 Ultra Now Has a Titanium Design
Samsung's Galaxy S24 Ultra Now Has a Titanium Design
23 Photos
I Took 600+ Photos With the iPhone 15 Pro and Pro Max. Look at My Favorites
I Took 600+ Photos With the iPhone 15 Pro and Pro Max. Look at My Favorites
34 Photos
17 Hidden iOS 17 Features You Should Definitely Know About
17 Hidden iOS 17 Features You Should Definitely Know About
18 Photos
AI or Not AI: Can You Spot the Real Photos?