X

16 Must-Know Christmas Light Safety Tips

Christmas lights can pose a major hazard inside and outside your home. Here's how to prevent a potential disaster.

macy-meyer
alina-bradford.jpg
macy-meyer
Macy Meyer
alina-bradford.jpg
Alina Bradford
ball of Christmas lights
1 of 17 Alina Bradford/CNET

Is there anything like Christmas lights to get you into the holiday spirit? From the tree to the front porch and fence, Christmas lights make the holiday season merry and bright.  

These pretty decorations don't come without risks, though. Falls, electrocution and even fires are very real possibilities. An average of 770 fires are caused by Christmas lights every year, according to the National Fire Protection Association. 

With proper preparation and safety practices, you can avoid those dangerous situations with your holiday decorations. You just need to take a few precautions inside and outside your home. 

Here are 16 potential holiday light hazards and safety tips you need to know.

replacement Christmas bulb
2 of 17 Alina Bradford/CNET

1. Beware missing or broken bulbs

Replace any missing or broken bulbs before you string up your porch or tree because they could lead to electrocution, fires or injuries. 

Most lights come with replacement bulbs, but you can also buy a pack at your local home improvement store for about $3. 

gloved hand fixing a broken string light
3 of 17 Alina Bradford/CNET

2. Fix busted string lights

It happens. You found a broken light string. Luckily, CNET has a full guide to fixing Christmas lights, including fixing bulbs and changing out fuses.

lights on a wood ladder
4 of 17 Alina Bradford/CNET

3. Use the right ladder

If you decide to pull a Clark Griswold and decorate your home's exterior and roof, you'll need a ladder to reach those high-up spots.

The type of ladder you use matters. Metal ladders conduct electricity, which can lead to electrical shocks. The Electrical Safety Foundation International recommends using a wooden or fiberglass ladder when hanging lights to avoid electrical shocks.

img-4659
5 of 17 Alina Bradford/CNET

4. Pick the right kind of light

While indoor and outdoor lights are similar in appearance and function, you shouldn't use them interchangeably. Indoor lights should only be used indoors and outdoor lights should only be used outside. Here's why. 

Indoor lights have been specifically tested to make sure they aren't a fire hazard for tree decorating, while outdoor lights are specifically tested to withstand cold and rainy weather. Outside lights could pose a fire hazard if you string them up on the family tree because they're often hotter, while the indoor lights probably wouldn't survive the snow storm. 

To be safe, you can purchase lights that are certified for indoor and outdoor usage. Whether you're using indoor or outdoor, though, the US Fire Administration recommends buying only lights certified by an approved testing facility (more on this next). 

UL label on box of lights
6 of 17 Alina Bradford/CNET

5. Look for the UL seal

No matter the climate where you live, look for the UL seal on the box. 

That seal means that the lights meet the national industry standards of the American National Standards Institute.

extension cords
7 of 17 Alina Bradford/CNET

6. Choose the right cord

Like the string lights, you should always only use an extension cord that is rated for outdoor use when stringing up lights on the porch or house. Indoor-use extension cords aren't made to withstand cold or wet environments.

plugs on the ground
8 of 17 Alina Bradford/CNET

7. Keep the cord dry

You shouldn't let your extension cords sit on the ground as shown in the photo. Make sure the junction where your light cord and your extension cord meet stay out of puddles, damp soil, snow or ice because a potentially damaged extension cable could cause injury or death from electrocution, fire, or carbon monoxide poisoning if wet. 

You can buy an inexpensive cord protector -- like the Twist and Seal Heavy Duty Cord Protector -- to keep your cords dry and safe. You could also plan your light display so that connections are suspended off the ground instead of sitting in contact with it.

light stakes in the ground
9 of 17 Alina Bradford/CNET

8. Prevent tripping hazards

Keep your light strands off the ground, too. Lights and cords on the ground pose a tripping hazard and can easily be broken if stepped on. 

If you want to make a cool runway effect down your walkway, use light stakes. You just stick them in the ground and the lights clip to the top of the stake.

You can also use anchoring pins or ground staples to secure extension cords to the ground on either side of a walkway to prevent tripping hazards. Simply thread the cord through the middle and push the ends of the pin or staple into the dirt. If you have some wire hangers, a pair of pliers and wire cutters lying around, you can make your own staples in a pinch. Just cut 8 inches (20 centimeters) of wire and bend it into a U-shape.

cristmas lights over a June calendar
10 of 17 Alina Bradford/CNET

9. Don't make your lights a year-long attraction

Sure, they're pretty, but don't leave your lights up for too long. Many lights, including smart lights, aren't meant for long-term use. Be sure to check the light's box for information on just how long you can safely leave your lights up.

several plugs in one outlet
11 of 17 Alina Bradford/CNET

10. Mind the outlet

If your lights look like this photo, then you're doing it wrong -- that's way too many plugs in one outlet.

We recommend plugging your lights into a ground fault circuit interrupter (GFCI) outlet. These outlets will shut the circuit down if there is too much current flowing through, preventing fires.

If your outlet is a GFCI, it will have a reset and test button in the center. If you don't have one, you can purchase a portable GFCI outlet from your home-improvement store. You could try this waterproof in-line GFCI or this portable GFCI.

Christmas light strands
12 of 17 Alina Bradford/CNET

11. Keep it to 3 strands

The Electrical Safety Foundation International recommends connecting no more than three strings of incandescent lights together. If you're using LEDs, most UL-labeled lights will tell you on the package how many strings of lights you can safely string together.

Christmas lights threaded through a door
13 of 17 Alina Bradford/CNET

12. Don't put cords through doors and windows

Don't run your extension cords through window or door cracks. The cord could become pinched, which can fray the insulation around the wires and lead to a nasty shock.

20151205-153038
14 of 17 Alina Bradford/CNET

13. Never use staples, tacks or nails to hang lights

Sharp objects can easily pierce the strands and create a potential electrical shock. It's best to use plastic holders or simply wrap the lights around the fence, porch or tree. 

multicolor Christmas lights
15 of 17 Alina Bradford/CNET

14. Turn off lights overnight

Though beautiful and festive, you should turn off your lights for a few hours each day. 

lights wrapped around a young boy
16 of 17 Alina Bradford/CNET

15. Be careful decorating living creatures

Never string up a human or animal with the lights that you plug in, even if it's just for a photo -- they could get an electric shock or burns if the lights are too hot.

Most places that sell Christmas lights also sell strands of battery-powered lights. These don't get hot and won't potentially electrocute the wearer. Plus, they come in fun shapes. We've seen strands shaped like snowflakes, candy canes and gumdrops.

lights decorating a truck
17 of 17 Alina Bradford/CNET

16. Light your car safely

When decorating your vehicle for Christmas parades, make sure to use a power inverter to produce enough power for lights that have a voltage more than 12V. 

Most Christmas lights are 110V AC (alternating-current) and your vehicle can typically only power 12V DC (direct current). The Potek 2,000W Power Inverter Three or the Ampeak 1,200W Power Inverter are good choices.

Also, be sure to firmly secure the lights to your vehicle so that they don't drag on the ground and shatter. Strong magnets that you can buy from craft stores work well. Just be sure not to drag the magnet across your car's finish when pulling it off. Always pull up to avoid scratches.

Don't forget to only use your car holiday lights when it's dry outside, too. 110V AC lights can give you a deadly shock if they get wet.

More Galleries

2022's Best TV Shows You Can't Miss on Netflix, HBO, Disney Plus and More
John Cena attends Warner Bros. premiere of The Suicide Squad, in costume as Peacemaker.

2022's Best TV Shows You Can't Miss on Netflix, HBO, Disney Plus and More

95 Photos
US Air Force at 75: These Are the Aircraft It's Flown
110403-f-ka253-155

US Air Force at 75: These Are the Aircraft It's Flown

45 Photos
The Best Games on Nintendo Switch in 2022
zelda-cnet-2.jpg

The Best Games on Nintendo Switch in 2022

36 Photos
Toyota C-HR Prologue Sharpens Up the Small SUV
Toyota C-HR Prologue

Toyota C-HR Prologue Sharpens Up the Small SUV

11 Photos
The 51 Best VR Games
astro-bot-rescue-mission-screen-02-ps4-us-18may18

The 51 Best VR Games

53 Photos
Movies Coming in 2022 From Marvel, Netflix, DC and More
thor4

Movies Coming in 2022 From Marvel, Netflix, DC and More

85 Photos
2024 Acura Integra Type S Looks Sharp in Camouflage
2024 Acura Integra Type S

2024 Acura Integra Type S Looks Sharp in Camouflage

9 Photos