3D printing workstation

Here's our setup. The Mosaic 3D printer requires two power supplies, which are the two small boxes to the immediate left of the printer. We rigged up the spool for the plastic filament from some old laptop battery life testing hardware.
Photo by: Matthew Fitzgerald/CNET

Mosaic source files

Here are the main downloads we needed to track down to line up the software side of our printer. MakerGear's getting started guide does a reasonably good job of walking you through, but you will also need to do some Googling to rectify MakerGear's download list with different versions of the above programs that you will run into.
Photo by: Screenshot by Rich Brown/CNET


MakerGear recommends using a program called Pronterface, part of a larger software package called Printrun, to operate the Mosaic printer from your Windows desktop. I wouldn't say Pronterface is idiot-proof, but it's more or less intuitive enough that an experienced computer user shouldn't have too much trouble.
Photo by: Screenshot by Rich Brown/CNET


Skeinforge works in conjunction with Pronterface, and it's in this program where you can fine tune your printer settings. We didn't explore these settings in depth for the sake of time, but the variables you can change in terms of print speed, extruder temperature, and other settings give you a powerful, and daunting, degree of tweakability.
Photo by: Screenshot by Rich Brown/CNET

The Knife Assistant

We used Michael "ThePlanetMike" Bowers' Knife Assistant design as a test print.
Photo by: Matthew Fitzgerald/CNET

Brian Emerson's Bucket O' Octopi

We tracked down Brian's design for our final test print.
Photo by: Thingiverse


ReplicatorG is another 3D-printing front-end application, similar to Pronterface, but it seems to be more powerful. We used it to scale the octopus model to fit our Mosaic printer's build area.
Photo by: Rich Brown/CNET

Octopus in progress

It took some trial and error, but eventually we got a clean build of Brian Emerson's Bucket O' Octopi design.
Photo by: Matthew Fitzgerald/CNET

Gabe Weintraub's Printable Pig

Gabe kindly submitted his design as a possible test print. He warned me that it required a lot of support material, an element of 3D printing we didn't really explore. Designs with big overhanging elements, like the pig's wings, won't print correctly without some kind of support structure because of the molten plastic. For the sake of time we opted for Brian's octopus design, but Gabe's design helps us illustrate how support could be important.
Photo by: Thingiverse

Bucket O' Octopi

Our final print was almost perfect.
Photo by: Matthew Fitzgerald


Samsung Galaxy S8's major makeover

This year's flagship phone gets a sexy new design and Bixby, a house-made digital assistant.

Hot Products