With the holiday season upon us, you may be getting your home ready for guests (or just want to tidy up for yourself). And one of the last things you or your visitors want to deal with is low water pressure or -- maybe worse -- a spray that goes in every direction as you try to wash the shampoo out of your hair.
That's what may be happening if you have a clogged showerhead, which happens when the minerals in the water build up over time.
Sure, you could buy a new showerhead to replace your current one, but that only temporarily solves the problem -- and it's way more expensive than our tried-and-true trick. You'll start by addressing the root of the problem: that mineral buildup from hard water.
Water is considered "hard" when it contains high levels of dissolved solids, mostly calcium and magnesium. That's the stuff that ends up sticking to the metal and plastic in your showerhead, collecting over time and causing a buildup of crusty bits around the water spouts. Eventually, your house's water pressure can't compete, and your shower stream slows to a trickle. Shower filters are one way of preventing the problem, but there's an even easier fix.
This science-based hack is so low-effort, in fact, waiting is truly the hardest part. With just a few common household supplies and some patience, you can have your shower's water output restored to its once-magnificent original flow in about an hour. Here's how to do it.
For more tips around the home, here's how to clean your oven without harsh chemicals and how to unclog your toilet without a plunger.
Gather these items you already have in your junk drawer
First, gather up your supplies. If you've got a small enough showerhead, a sandwich bag might very well do the trick. For larger hardware, though, you might need to grab a big ole 1-gallon bag. You'll also need a rubber band to tie it up, but look for a thicker band, like the ones used to hold asparagus or broccoli crowns together at the supermarket. Water gets heavy, and quick. For the science-y part, you're going to create a 50/50 solution of either CLR household cleaner (available at most grocery stores, Walmart and Amazon) or white vinegar (the stuff in your cupboard will do) and plain shower water.
Soak, soak, soak your way to a rejuvenated showerhead
Fill the bag about halfway with either CLR or white vinegar, then insert the showerhead into the bag. Secure it with the rubber band or bands, then gently turn on the water to the shower just enough to fill the bag the rest of the way and mix up the solution. Whatever you do, don't crank the shower on full blast, or else the sudden pressure may inadvertently launch the plastic bag across your bathroom.
Next, set a timer for 60 minutes. You could use your phone, a kitchen timer or a smart assistant -- here's how to set multiple timers with Google Home, as well as with Amazon's Alexa on Echo devices.
Wipe, rinse and (hopefully) there's no need to repeat
After your timer goes off, remove the bag from your showerhead and let the cleaning solution spill into the drain. Toss the bag in the trash and wipe down your shower hardware with a damp cloth.
Then, the moment of truth: Turn on your shower (full-blast, this time) and see how much more powerfully and evenly it sprays. If for some reason there are still a few clogged spouts, try repeating this process. But for most clogged showerheads, one round of this treatment should do the trick.
For more cleaning tips, here's how to easily clean pet fur off your sofa.
More cleaning hacks
- How to Kill Mold in Your Washer and Prevent It From Coming Back
- How Often Should You Clean Your Makeup Brushes? We'll Explain
- Try This Easy Hack to Safely Clean Oven Grease From Hard-To-Reach Places
- How to Remove Stubborn Makeup Stains From Your Bedding
- How to Make Your Fridge Food Last Longer to Save Money
- How Often You Should Clean Your Fridge (and How to Do It Right)
- Still Using Vinegar in Your Dishwasher? Here's Why You Need to Stop