Thank you for being a valued part of the CNET community. As of December 1, 2020, the forums are in read-only format. In early 2021, CNET Forums will no longer be available. We are grateful for the participation and advice you have provided to one another over the years.

Thanks,

CNET Support

Question

Wireless Network Internet Access recuired

by Dec 9, 2015 4:23AM PST

Dear All,

I have configured a testing environment for my wlan and I am able to register my WAP which is Cisco 2602i with 5760 WLC. I am able to get the ip for a client and can connect to the wireless network.

The question I have is, how i can allow internet access to the clients that connects through the WAP. I have a vlan 200 which has a scop used to assign ip addresses to WAPs and to the clients. I connect my internet connection in the switch and configure a vlan for that say 115 now I create an SVI for vlan 115 to perform inter-vlan routing but i m unable. I have performed static routes etc but I am unable to give internet access to my wireless clients can some help me in this regards what to do.

Thanks in advance.
Regards,

Discussion is locked

2 Posts
- Collapse + Expand Details
- Collapse -
Answer
In this case
by Forum moderator Dec 9, 2015 8:49AM PST

Call Cisco and ask which classes will get you on the fastest track to administer your Cisco products. We are not talking consumer, home and small business setups here (which is mostly what this forum caters to.)

There are Cisco specific forums you may want to use. Cisco should point you there as well.

- Collapse -
k
by Newbie16 Dec 9, 2015 8:35PM PST

Ok no issue, Thanks

Back to Networking & Wireless forum

CNET Forums

Operating Systems
Software
Electronics & Gadgets
Hardware
Tablets & Mobile Devices
General Help
Brand Forums
Roadshow Autos
Off Topic

Other Forums

Forum Info