I removed something from my computer in disc cleanup or add/remove programs that my nec versa e6300 is now unable to restart.
I get a black screen with error an message and the option to choose startup repair (recommended)or start windows normally. If I choose repair, it just keeps showing the same option over and over. And if i choose start normally, i get a blue screen with the following message. It shows up very quickly and then disappears after about 1 second, the computer then turns off and then back on itself and back to the black error screen. Does this message mean anything to someone?
A problem has been detected with your computer.
If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps.
Check to be sure you have adequate disc space. If a driver is identified in the stop message, disable the driver or check with the manufacturer for updates. Try changing video adapters.
Check with your hardware vendor for any BIOS updates. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your computer, press F8 to select advanced startup options, and then select safe mode.
stop: 0x0000007E (0xC0000005, 0x8375E5E4, 0x803999A0, 0x8039969C)
FLTMGR. SYS - Address 8375e5e4 base at 83730000, datestamp 47918a
I didnt recieve any backup cds or recovery, is there a site i can download startup repair or something, or have i ruined my computer?
Help, my PC with Windows 10 won't shut down properly
Since upgrading to Windows 10 my computer won't shut down properly. I use the menu button shutdown and the screen goes blank, but the system does not fully shut down. The only way to get it to shut down is to hold the physical power button down till it shuts down. Any suggestions?