Using different IP address ranges/subnets

I have 2 routers, and I want to have two separate ranges of IP addresses for different groups of devices.

Group 1: 10.111.114.XXX
Group 2: 10.111.122.XXX

What is the best way I can use to accomplish this?

Discussion is locked
Reply to: Using different IP address ranges/subnets
PLEASE NOTE: Do not post advertisements, offensive materials, profanity, or personal attacks. Please remember to be considerate of other members. If you are new to the CNET Forums, please read our CNET Forums FAQ. All submitted content is subject to our Terms of Use.
Reporting: Using different IP address ranges/subnets
This post has been flagged and will be reviewed by our staff. Thank you for helping us maintain CNET's great community.
Sorry, there was a problem flagging this post. Please try again now or at a later time.
If you believe this post is offensive or violates the CNET Forums' Usage policies, you can report it below (this will not automatically remove the post). Once reported, our moderators will be notified and the post will be reviewed.
- Collapse -
Re: routers

Set each router's DHCP to give out the addresses you want. The user manual tells how to do that, if possible.

Do you know about subnets?

- Collapse -
The easy way.

Get two internet connections and connect one router to one ISP and the other router to the other ISP. That works.

If you connect one more router say like this:
ISP -> First router and the next two routers to LAN ports, that also can work. But sometimes folk want a non-supported setup So you can also do:
ISP -> First router and then next router to a LAN port and configure but this does not assure the second LAN won't see the first LAN. Hence it takes 3 routers.

CNET Forums