Trouble with a S5000PSLSASR build

Feb 29, 2016 7:58PM PST

Just slapped this thing into my case and threw it all together. I keep getting an amber blinking LED from the status LED, which according to table 40. System Status LED, it means it's non-fatal alarm – system is likely to fail, and one of the following is true. -Critical voltage threshold crossed -VRD hot asserted -Minimum number of fans to cool the system are not present or have failed -In a non-sparing and non-mirroring mode, if the threshold of ten correctable errors is crossed within the window. Can someone help me figure out how to find out the problem and to fix it? If I need to elaborate more, I can.

Specs: [RAM]: 32GB (8x4GB) HYS72T512420EFA-3S-C2 PC2-5300F [CPU]: 2x Intel Xeon L5420 2.5GHz 4 Core SLARP [PSU]: EVGA 500 W1 80+, 500W 100-W1-0500-KR

Technical Details

User Manual

Tested Memory List

Picture of the LED Status list

Discussion is locked

Reply to: Trouble with a S5000PSLSASR build
PLEASE NOTE: Do not post advertisements, offensive materials, profanity, or personal attacks. Please remember to be considerate of other members. If you are new to the CNET Forums, please read our CNET Forums FAQ. All submitted content is subject to our Terms of Use.
Reporting: Trouble with a S5000PSLSASR build
This post has been flagged and will be reviewed by our staff. Thank you for helping us maintain CNET's great community.
Sorry, there was a problem flagging this post. Please try again now or at a later time.
If you believe this post is offensive or violates the CNET Forums' Usage policies, you can report it below (this will not automatically remove the post). Once reported, our moderators will be notified and the post will be reviewed.

CNET Forums

Forum Info