Technika TT-09 remote control help.

dose any one know the codes for a beko tv i'am useing a technika tt-16 remote and do not have the codes pls it will help .

i got same remote but it doesnt have thehikona tv codes can any 1 help

Just on the net trying to find the activation code for a Technika TT-09 remote to work on a Philips TV !! Saw your e mail - did you have any success in finding a manual ?? Any help greatly appreciated ! x

I have a technica tt-09 with no manual. Can anyone provide me with the access code for a Matsui television? Many thanks in anticipation.

Apologies - it's a Technika TT-09 I have - the television is a Matsui and I need the code for the control.

Could anyone please let me have the code for a BEKO tv. I have set it up once awhile ago but for some reason (probably my 5 year old) it is not programmed now. I have lost the instructions.
Many Thanks

did you manage to get the codes for a beko tv if so could u please send them to my email address tiara1302@yahoo.co.uk

i got the user manual email me at scania1@tiscali.co.uk if you need help. please include the make and type of device eg. TV, cable, VCR, etc.

Auto code search

1. switch on the TV and select a channel eg. Bbc1 on the TV itself
2. press the appropriate device button eg. TV
3. press the green SET button for approx 5 seconds until the red light comes on.
4. release the green SET button and point the remote at the device to be controlled, the remote will emit a test signal about every 2 seconds.
5. when the TV switches itself off briefly press the green SET button to store the code found.
6. when the red light goes out the search is ended.
7. try out the remote if it works follow the same steps to set it to other devices eg. DVD. If it does not work follow the steps again.
cover other remote sensors on other devices when setting the remote.

hi i have a tt16 remote i was wondering if you have a code for a samsund tv it would help me out as kids have thrown it away by mistake

here are all the codes for samsung tv's

026, 033, 043, 159, 160, 170, 175, 212, 215, 702, 703, 716

I don't suppose you have a code for an orion do you? I got the instruction book with the remote control and set it (I seem to remember it was the last one on the list) but it has now lost the code and I can't find the instructions!! Thanks so much.

codes for orion are;
006, 016, 028, 057, 088, 108, 109, 187, 188, 189, 253.

see instructions in previous post

Direct code entry
1. 1. Turn on the TV and select a channel e.g. BBC1 on the TV itself.
2. Hold down the green SET button and at the same time press a device button e.g. TV. Until the red light (bottom left of remote) comes on.
3. Release the 2 buttons and enter the code, for the digit 0 use number 10
4. When the first and second buttons of the 3 digit code are entered the red light will briefly go out, when the third button is pressed it stays out, which indicates the code has been accepted

I found I had to do this several times before it worked properly and on one TV it just would not work attall. Also make sure you cover any other remote sensors on other devices so the remote can only see the device being set.

Good luck!!!

ive lost my instuctions for my TT-16 and ive followed the step by step guide u put on the internet but know my tv will not turn on ive got a hitachi tv please help thank you james

here are the codes for hitachi telly's there are a load of em!
004, 040, 041, 042, 044, 047, 055, 061, 062, 063, 064, 065, 067, 068, 174, 221, 222, 710.

Direct code entry
1. 1. Turn on the TV and select a channel e.g. BBC1 on the TV itself.
2. Hold down the green SET button and at the same time press a device button e.g. TV. Until the red light (bottom left of remote) comes on.
3. Release the 2 buttons and enter the code, for the digit 0 use number 10
4. When the first and second buttons of the 3 digit code are entered the red light will briefly go out, when the third button is pressed it stays out, which indicates the code has been accepted

I found I had to do this several times before it worked properly and on one TV it just would not work attall. Also make sure you cover any other remote sensors on other devices so the remote can only see the device being set.

Good luck!!!

hi would you mind please posting the codes for a bush? we just bought one of these remotes for the kids telly and its useless... no instuctions! thanks in advance
haggiss

sure the code for bush telly's is 022

cheers mate i'll try it in the morning
regards
haggiss

I have an Alba DVD74 DVDplayer, would you happen to know the code for it?

Not sure I've got the hang of this forum yet - can't find where to start my own post without replying to someone else's.

Never mind - here goes

I was hoping that WOMBAT might have a remote code for my Ronin M270 portable DVD player.

Many thanks

Cervinus

Can you please tell me the codes for a Daewoo TV.

Hi,

Could you pissibly send me the codes to tune the TT-16 to a "Grundig" TV?

Cheers

Hi, just e-mailed your main account but wondered if you might see this first. Please could you let me have the codes for a Toshiba TV? Thanks a bunch

Hi Could you please E Mail me a copy of the instructions as I have tried the auto set up but it dosent seem to work.
My E . Mail address is yeoldeteashoppe@btconnect.com

Very many thanks 154whu

hi

sorry for being annoying, but could you plz help me with finding the code for the above tv, i have lost my manual and forgot to note the code down first.

many thanks

Hi, anyone have codes for a ferguson telly, might save me going through all 999 possibilities?

Thanks.

can anyone help plzzz

many thanks