Question

settings needed: LG 65UF9500

I need the professional settings for the LG 65UF9500. I did see an unanswered post for the 86xx model, but since LG has multiple technologies under it's Colorprime umbrella, I wanted to make sure any calibrations were for the nanocrystal filter version and not the more generic WCG models.

Thanks 1,000,000!

Discussion is locked
Follow
Reply to: settings needed: LG 65UF9500
PLEASE NOTE: Do not post advertisements, offensive materials, profanity, or personal attacks. Please remember to be considerate of other members. If you are new to the CNET Forums, please read our CNET Forums FAQ. All submitted content is subject to our Terms of Use.
Reporting: settings needed: LG 65UF9500
This post has been flagged and will be reviewed by our staff. Thank you for helping us maintain CNET's great community.
Sorry, there was a problem flagging this post. Please try again now or at a later time.
If you believe this post is offensive or violates the CNET Forums' Usage policies, you can report it below (this will not automatically remove the post). Once reported, our moderators will be notified and the post will be reviewed.
Comments
- Collapse -
Answer
(NT) settings for lg 65uf9500
- Collapse -
(NT) Tip. Check AVSFrorums too.
- Collapse -
Answer
settings lg65UF9500

i have the lg65 uf9500 with coler prime the best setting is sinma mode here are the settings yond to chinge them a little BACK LIGHT 87 CONTRAST 80 BRIGHTNESS 53 SHARPNESS 10 COLOR 50 TINT 0 EXPERT CONTROLL DYNAMIC CONTRAST OFF SUPER RESOLUTION OFF COLER GAMET STANDARD EDGE ENHANSER OFF COLER FILTER OFF EXPERT PATTERN GRAYED OUT OFF GAMA 2.2 WHITE BALANCE COLER TEMPATURE WARM 3 METHOD 2POINTS POINTS LOW RED 0 GREEN-10 BLUE -10 POINTS HIGH RED O GREEN -10 BLUE -10 APPLY TO ALL IMPUTS CICK 3 TIMES TO MAKE SHORE THER LOCKED IN I HAVE DIGECTV i turned on the HDMI ULTRA HD COLER it made the picher better

Note: Email address removed by moderator to preserve privacy.

Post was last edited on March 20, 2016 4:46 PM PDT

CNET Forums