General discussion

Sending video signal to mini mac via firewire800 port.

New to mac here... one was purchased for church 2 months ago. Im an advanced PC user so I shouldn't have too much trouble translating Mac-speak... I hope.
I am sending an analog video signal from a cctv camera, into a Sony DVMC-DA2 video-in port. I want to send the output from the DV-out port using a DV to Firwire 800 cable and into the firewire 800 port on the mini mac. Is this possible and if so, how? If not, is there another way to do it? The analog video signal is working all the way to the DV out on the DA2. The mini mac won't recognize it from the DA2. I want to broadcast this signal over Ustream's Watershed streaming service. Thanks.

Discussion is locked

Reply to: Sending video signal to mini mac via firewire800 port.
PLEASE NOTE: Do not post advertisements, offensive materials, profanity, or personal attacks. Please remember to be considerate of other members. If you are new to the CNET Forums, please read our CNET Forums FAQ. All submitted content is subject to our Terms of Use.
Reporting: Sending video signal to mini mac via firewire800 port.
This post has been flagged and will be reviewed by our staff. Thank you for helping us maintain CNET's great community.
Sorry, there was a problem flagging this post. Please try again now or at a later time.
If you believe this post is offensive or violates the CNET Forums' Usage policies, you can report it below (this will not automatically remove the post). Once reported, our moderators will be notified and the post will be reviewed.

CNET Forums

Forum Info