I'm curious why you are using two different private address spaces per subnet? Why not keep it simple and just use the 10 network? I assume this is a homework project, so maybe that is part of the requirements?
Here are our requirements for the main location:
- VPN (site to site)
- Wireless on one subnet
- One public broadband connection shared with 3 private subnets.
Here is what I was thinking:
Wired VPN router with public IP and 10.0.0.1
Lan1= Router with 10.0.0.5 and 192.168.1.1
Lan2= Wireless router with 10.0.0.6 and 192.168.2.1
Lan3= Router with 10.0.0.7 and 192.168.3.1
All incoming traffic (VPN and port forwarding) will be sent to the Lan2 router. Anyone see a problem with this?