Spyware, Viruses, & Security forum

General discussion

Security Centre appears always deactivated each time I boot

by Vzla / March 4, 2007 6:05 AM PST

Each time I click Start> Close> Shut Down, when Windows is closing appears this message error:
ccSvcHst.exe Application error. The memory couldn?t be read.

When the computer is working I go to Security Centre there says :- Wasn?t initiated or was interrupted. I always go to Services and in Security Centre I put in Automatic and Start click Ok and stays that status until I shut down or reboot the computer.

In my computer I have installed and run often:
AVG Anti-Spyware 7.5 (Free), Ad-Aware SE Personal, Spybot- Search & Destroy 1.4,
SpyCatcher Express (free), SpywareBlaster 3.5.1, Windows Defender,
Bazooka, Cwshredder2.19, Spyware Doctor, Cwshredder2.19, RogueRemover,
Spyware Terminator (Active), Stinger260.exe, and Norton AV 2007.
I use, too, Ccleaner and RegSeeker.
From times to times I run an on line scan with Panda, McAfee, Windows Live One Care?
My operating System is Windows XP-SP2.
My computer is a Pentium(R) 4 CPU 3.00 Ghz 512 MB RAM.
Could one of the above programs interfere with Security Centre or what can be wrong?
Anybody helps?
Thanks in advance and
Best Regards for You All.

Discussion is locked
You are posting a reply to: Security Centre appears always deactivated each time I boot
The posting of advertisements, profanity, or personal attacks is prohibited. Please refer to our CNET Forums policies for details. All submitted content is subject to our Terms of Use.
Track this discussion and email me when there are updates

If you're asking for technical help, please be sure to include all your system info, including operating system, model number, and any other specifics related to the problem. Also please exercise your best judgment when posting in the forums--revealing personal information such as your e-mail address, telephone number, and address is not recommended.

You are reporting the following post: Security Centre appears always deactivated each time I boot
This post has been flagged and will be reviewed by our staff. Thank you for helping us maintain CNET's great community.
Sorry, there was a problem flagging this post. Please try again now or at a later time.
If you believe this post is offensive or violates the CNET Forums' Usage policies, you can report it below (this will not automatically remove the post). Once reported, our moderators will be notified and the post will be reviewed.
Collapse -
Vzla
by tomron / March 4, 2007 6:33 AM PST

Click HEREfor possible solution.

Tom

Collapse -
Now, I now who causes the problem?
by Vzla / March 5, 2007 3:49 AM PST
In reply to: Vzla

Hi, Tom. I spent a ?LIIIIIIIIITLE? time reading the posts in the link You suggested and am very surprised with what I read there. I learned a few things more?
Unfortunately I?m not the only affected with this problem and for sure I?ll have the annoyance for a while.
Anyway, Your help was great.
Thaks a lot.
Vzla.

Collapse -
(NT) Your welcome,thanx for posting back
by tomron / March 5, 2007 5:17 AM PST
Collapse -
ccSvcHst.exe and Security Center of Windows XP SP2

"Each time I click Start> Close> Shut Down, when Windows is closing appears this message error:
ccSvcHst.exe Application error. The memory couldn’t be read.

When the computer is working I go to Security Centre there says :- Wasn’t initiated or was interrupted. I always go to Services and in Security Centre I put in Automatic and Start click Ok and stays that status until I shut down or reboot the computer."

You could try this:
Run the Autofix tool for your Symantec product: Go to http://www.symantec.com/en/us/home_homeoffice/support/index_ts.jsp

If the problem is not solved using their Autofix tool, uninstall Norton AV 2007 by using the removal tool:
http://service1.symantec.com/SUPPORT/tsgeninfo.nsf/docid/2005033108162039
Reinstall if you wish to install NAV 2007 again.

See if the above will stop your problem on Windows Security Center.

Collapse -
I?ll give a chance to Norton AV
by Vzla / March 5, 2007 3:51 AM PST

I couldn?t run the Autofix tool from Symantec. An error script appear.
Before, I was using McAfee. Changed to Norton. My computer became much slower. But I thought security could compensate that loss.
This moment I?ll give a chance to Norton AV. Just don?t know for sure which one to use and spend some time to learn and deal with a new one. Any suggestion?
I?ll install the Norton AV 2007.2. At least will have the last version even I know now it won?t solve the problem.
Thanks a lot for trying to help.
Vzla

Collapse -
You could try
by Donna Buenaventura / March 5, 2007 3:59 AM PST
Collapse -
Thanks again, Donna
by Vzla / March 5, 2007 4:14 AM PST
In reply to: You could try

I?ll keep Your suggestions
Vzla

Collapse -
You're welcome & Good Luck!
by Donna Buenaventura / March 5, 2007 4:20 AM PST
In reply to: Thanks again, Donna

Glad we could help!

Popular Forums
icon
Computer Newbies 10,686 discussions
icon
Computer Help 54,365 discussions
icon
Laptops 21,181 discussions
icon
Networking & Wireless 16,313 discussions
icon
Phones 17,137 discussions
icon
Security 31,287 discussions
icon
TVs & Home Theaters 22,101 discussions
icon
Windows 7 8,164 discussions
icon
Windows 10 2,657 discussions

CNET FORUMS TOP DISCUSSION

Help, my PC with Windows 10 won't shut down properly

Since upgrading to Windows 10 my computer won't shut down properly. I use the menu button shutdown and the screen goes blank, but the system does not fully shut down. The only way to get it to shut down is to hold the physical power button down till it shuts down. Any suggestions?