Attention: The forums will be placed on read only mode this Saturday (Oct. 20, 2018)

During this outage (6:30 AM to 8 PM PDT) the forums will be placed on read only mode. We apologize for this inconvenience. Click here to read details

Samsung forum

Question

Samsung CLX3175 FW Printer - Systenm Error Cycle Power

by dslongstaff / January 3, 2012 3:51 AM PST

Hi,

I wonder if anyone can help. I am getting a message "System Error
Cycle Power" on my Samsung CLX 3175 FW printer. Rebooting machine multiple times
makes no difference. Some suggested you should reinstall the drivers on your PC,
but that seems completely wrong to me.

Most Google searches suggest it
needs a new fuser unit (only 14 months old, so a bit annoying.) However, the
error message seems a bit vague.

I've managed to get the old one out, but
can't decide what part to buy. The service manual I found online says
"JC96-04780A" (it's a 220V - UK model). This part seems to be quite expensive at
around £90.

However, Google searches for a "fuser unit for Samsung CLX
3175" seem to bring most results for a part "JC96-05491B" at about £40. The
images look like it's the right part, and so it's tempting to go for the cheaper
product.

I have 2 questions.

1) Does anyone know if the system
error really does mean a new fuser unit is required?
2) Any ideas if the
cheaper part will be fine? Any help will be really appreciated.

Discussion is locked
You are posting a reply to: Samsung CLX3175 FW Printer - Systenm Error Cycle Power
The posting of advertisements, profanity, or personal attacks is prohibited. Please refer to our CNET Forums policies for details. All submitted content is subject to our Terms of Use.
Track this discussion and email me when there are updates

If you're asking for technical help, please be sure to include all your system info, including operating system, model number, and any other specifics related to the problem. Also please exercise your best judgment when posting in the forums--revealing personal information such as your e-mail address, telephone number, and address is not recommended.

You are reporting the following post: Samsung CLX3175 FW Printer - Systenm Error Cycle Power
This post has been flagged and will be reviewed by our staff. Thank you for helping us maintain CNET's great community.
Sorry, there was a problem flagging this post. Please try again now or at a later time.
If you believe this post is offensive or violates the CNET Forums' Usage policies, you can report it below (this will not automatically remove the post). Once reported, our moderators will be notified and the post will be reviewed.

All Answers

Collapse -
Answer
1. No.
by R. Proffitt Forum moderator / January 3, 2012 4:02 AM PST

2. No.

Sorry but if you look at questions about fuser units for all makes you see the same plea as above. They want it to be something else or cheaper. As I can't shop in the UK or Euro zones I don't know if it can be had for less but I do know that this part is changed out after many pages. If you don't want to risk it, take it to the Samsung service center and they will only change the right part.
Bob

Collapse -
Thanks - I think one question is answered (CLX 3175 printer)
by dslongstaff / January 4, 2012 3:24 PM PST
In reply to: 1. No.

Hi,
Someone has suggested that these are the same parts. If that is the case, that at least answers one point.
Anyone know if the "System Error Cycle Power" means a new fuser?
Many thanks.

Collapse -
It can mean that.
by R. Proffitt Forum moderator / January 5, 2012 1:28 AM PST

Today's gear is better than a few decades ago but I have encountered on the rare occasion where the message is something is out but find a paper scrap blocking the sensor. Very rare but happens. The only way to tell if the new fuser is the fix for most folk is to install the new fuser.
Bob

Popular Forums

icon
Computer Newbies 10,686 discussions
icon
Computer Help 54,365 discussions
icon
Laptops 21,181 discussions
icon
Networking & Wireless 16,313 discussions
icon
Phones 17,137 discussions
icon
Security 31,287 discussions
icon
TVs & Home Theaters 22,101 discussions
icon
Windows 7 8,164 discussions
icon
Windows 10 2,657 discussions

FALL TV PREMIERES

Your favorite shows are back!

Don’t miss your dramas, sitcoms and reality shows. Find out when and where they’re airing!