"REGISTRY_ERROR"

"REGISTRY_ERROR"

by rpm2004 Feb 8, 2004 9:46PM PST

REGISTRY_ERROR - this error appeared yesterday. There has been no hardware/software installed on the computer.

When the computer is turned on ? right after the WINDOWS XP Home Edition
Screen, the blue screen appears with the REGISTRY_ERROR message.

Even following the various options provided ? it does not help. Starting the machine with
the RESTORE CD gets the same blue screen error.

Rebooting in SAFE mode, the system scrolls through the files and stops at the iomdisk.sys file.

How do I resolve this issue?

Thank you

Discussion is locked

- Collapse -

Re:Iomega sees an issue....

by Michael Geist Feb 8, 2004 9:55PM PST

and offers a patch:

http://www.iomega.com/software/appservices.html

The problem appears to be how to get into Windows so that you might apply the patch. Tried Last Known Good from the Windows start menu?

- Collapse -

Shutdown, unplug IOMega drives and try again.

by r. proffitt Forum moderator Feb 8, 2004 10:04PM PST

- Collapse -

F8 while booting....

by Papa Echo Feb 8, 2004 10:09PM PST

Have you tried going back to the last good configuration option..... at the F8 boot menu ?

- Collapse -

Re:F8 while booting....

by rpm2004 Feb 8, 2004 10:33PM PST

I have tried every possible option and suggestion provided - it all goes back to the same BLUE SCREEN

HELP!!!!!

- Collapse -

Simply a 'REGISTRY_ERROR', and nothing else similar to

by Cursorcowboy Feb 9, 2004 1:33AM PST

Stop 0x00000051 REGISTRY ERROR

STOP 0x0000001E(0xc0000005,0x8051aebb,0x00000000,0x6f007e0f) <filename> EXCEPTION NOT HANDLED <filename>
80518ebb80400000 384d5876-<filename>

Note: The article [Q303980] describes how to modify the nonvolatile Random Access Memory (NVRAM) by using the Bootcfg.exe command-line tool. This tool can be used to configure, query, change, or delete the boot entry settings in the NVRAM. Specifically, the /sos switch that is used to display the names of each device driver while loading.

CNET Forums

Other Forums

Forum Info