You were asked to test this with one stick of ram and moving it to each slot.
Then test again with the other stick.
You dismissed that.
Then you were asked to test this with one gpu at a time.
You dismissed that.
You seem to be looking for a click on this fix.
Perhaps you should bring the machine to the repair counter.
My PC:
CPU:Intel Core i5 6600k
RAM: Corsair Vengeance LPX, 3000MHz
MB:Asus ROG Maximus VIII hero
GPUs: RX 570, 1070 GTX
Hello, my PC is freezing only when the RAM modules are in dual channel. When they're in B1 and B2 slots everything is working fine. When the PC freezes peripherals illumination goes black, but the PC seems running. Although the screen is frozen on the last frame. No sound whatsoever. QCode on the motherboard is A0 like when PC is running. To recover it I need to hard reset it by pushing the power button for 5 seconds. I already cleared the CMOS. For further information what I already did please refer to my other thread. Thank you for any help.
https://www.cnet.com/forums/discussions/pc-boot-problem-please-help-only-single-channel-works/#post-79aa9045-7f1f-4de8-b79b-fb0f80897c61

Chowhound
Comic Vine
GameFAQs
GameSpot
Giant Bomb
TechRepublic