General discussion

Old version for KX-TE Maintenance Console

Jan 13, 2020 5:49AM PST

Hello!
I have Panasonic KX-TEA308 PBX device and I also have KX-TE Maintenance console V3 programming software installed on my computer.
I want to connect the PBX to my computer to program it using the software, but an error appears says "Cannot connect with the PBX of this firmware version or Model Type".

I think the problem is that the firmware of the PBX is old and the software cannot handle this old version of firmware.
So, I need either to have an older version of KX-TE Maintenance console software, or a way to upload a new firmware version to the PBX.
I'm looking for an older version of the software, like Version2 for example.

If someone can help me on this I will be very grateful.
Thank you very much.

Discussion is locked

Reply
Follow
Reply to: Old version for KX-TE Maintenance Console
PLEASE NOTE: Do not post advertisements, offensive materials, profanity, or personal attacks. Please remember to be considerate of other members. If you are new to the CNET Forums, please read our CNET Forums FAQ. All submitted content is subject to our Terms of Use.
Reporting: Old version for KX-TE Maintenance Console
This post has been flagged and will be reviewed by our staff. Thank you for helping us maintain CNET's great community.
Sorry, there was a problem flagging this post. Please try again now or at a later time.
If you believe this post is offensive or violates the CNET Forums' Usage policies, you can report it below (this will not automatically remove the post). Once reported, our moderators will be notified and the post will be reviewed.
Comments
- Collapse -
A little too rare.
Jan 13, 2020 11:01AM PST

For this I'd be calling (phone, not email!) Panasonic to find what they may have laying around for this.

- Collapse -
KX-TE Maintenance console
Jan 19, 2020 3:05AM PST

A newer version of the maintenance console will usually allow you to log into an older firmware PBX and not the other way round. If your's is failing, i suggest you install the older version first then install the newer version if you are uncertain about the firmware of your PBX.

- Collapse -
Yes, you're right
Jan 19, 2020 5:55AM PST

Yes, you're right ..
I installed a newer version of Maintena[nce console and it works fine now.
Thank you all!

- Collapse -
you're right ..
Jan 21, 2020 12:59AM PST

Yes, you're right ..
I installed a newer version of Maintena[nce console and it works fine now.
Thank you all!

CNET Forums

Forum Info