Get back to the UBNT support to see if they can configure it for you.
Hello all, I need some help figuring out a problem. I have 2 remote sites at each site I have a Linksys LRT224 router at Site 1 is where the internet is at there is then a Ubiquiti NanoBridge with WDS enabled it is then connected to the WAN port of the second LRT at Site 2 feeding internet to that site. The problem is that the 2 sites are on different subnets and I need to be able to log into the equipment at Site 2 over a VPN but the one to one NAT setup at site one is stopping that from happening.
one to one NAT enabled 18.104.22.168
UBNT NanoBridge 192.168.10.150
UBNT NanoBridge 192.168.10.151
So with this setup when I do MY VPN I get into the router at Site 1 I can ping everything at Site 1 but nothing at site 2 past the router. When I'm logged in to Site 2 I can ping everything everywhere. I need to be able to log into a VPN at Site 2 and be able to access everything just at Site 2, or VPN into site one and be able to get all the way to everything at Site 2. Help would be much appreciated.