...are at the link below:
Although I've never used this type of case, personally, the instructions aren't that bad, I've seen worse, and the basic procedures for connecting the LED display begin at about Step 25 and end at step 36.. As long as you've got all the items connected, it states: "Once powered on, the LCD shows temperature readout with backlighting". It should light up when the computer is powered on. If the backlighting is being displayed, or the temperature indication isn't being displayed, then the power isn't connected correctly, (you should be able to test for that), or the LCD lights are damaged.
Hope this helps.
I have a new build in Apevia x-plorer case. The front has 4 leds and has an lcd temperature readout. However, I can not get it to turn on? All the wires are connected to the best of my knowledge. Inside the front panel is a switch to change the readout to C vs F. But I can't find a on-off switch. Anyone have this case or can think of what I'm missing? The instructions are horrible and can be seen at http://www.apevia.com/product.php?pid=152
Any help would be great!