Read your owners manual sounds like you may have blown the output section in your amp who knows anyway take a channel that still works and play each speaker to mkake sure your speakers are ok then check your wires for shorts , opens Just kidding but if you dont have the foggyest idea of what you are doing then find a friend that can help you out if you dont hook up your system properly you can reaqlly fry an amp which you may have already good luck to yuou steweeee
I need some help please. I have a JVC TH-C50 HTIB. You have to hook all of the speakers into the speaker. I am using 16 gauge wire and have hooked everything up. After doing so I noticed my rear right and front left speakers were not working. Thinking that maybe the speakers were blown, I swapped them with the speakers that were working and there was still no sound from them. I have a couple of the wires spliced, but the ones that are spliced work fine. Anyone have any ideas or is my receiver just shot on those channels?