There's an old tech trick so try this. Power down everything. Unplug the HDMI cables to the 2 things you need to work together, unplug the power to those 2 things. Wait 10 minutes for the HDMI chips to reset.
OK, apply power and ONLY connect the HT to the Epson. Test it out.
Remember that I leave it to you to set resolutions, inputs and output settings as well as factory resets.
Bob
I connected a Samsung HT-4500 home theater system (model code HT-H4500 /ZA) to an EPSON Powerlite 8350 projector (model H373A) via an HDMI cable. The projector is giving me a "No HDMI Signal" error. I have tried both HDMI inputs on the projector.
To make sure sure that the cables are fine and the Samsung unit and projector individually are all working properly I did the following:
connected the Samsung HT unit via the same HDMI cable to a Samsung TV (model code LT28D310NH/ZA). Video output was fine.
connected another Samsung DVD player (model code BD-E5400/ZA) to the projector via the same HDMI cable. Video output was also fine.
Is anyone aware of a compatibility issue between this particular Samsung HT-4500 unit and EPSON projectors? This would be strange because when I connect a Samsung DVD player to the projector there is no problem.

Chowhound
Comic Vine
GameFAQs
GameSpot
Giant Bomb
TechRepublic