HolidayBuyer's Guide

Laptops forum

General discussion

how enable infra red on an old toshiba

by imorphusvortex / October 16, 2007 8:16 AM PDT

Toshiba Satellite Pro 460CDT running windows 2000 Pro
when I go to control panel - Wireless Link - Hardware it says Device status: This device is disabled because the firmware of the device did not give it hte required resources. (code 29) then troubleshoot says the device was disabled by a user through the bios setup... then in resources - set configuration manually the input/output range icon has a red line through it,

what does it all mean, how do I turn it on, or even is there infrared on this comp, thanks for ya time.

Discussion is locked
You are posting a reply to: how enable infra red on an old toshiba
The posting of advertisements, profanity, or personal attacks is prohibited. Please refer to our CNET Forums policies for details. All submitted content is subject to our Terms of Use.
Track this discussion and email me when there are updates

If you're asking for technical help, please be sure to include all your system info, including operating system, model number, and any other specifics related to the problem. Also please exercise your best judgment when posting in the forums--revealing personal information such as your e-mail address, telephone number, and address is not recommended.

You are reporting the following post: how enable infra red on an old toshiba
This post has been flagged and will be reviewed by our staff. Thank you for helping us maintain CNET's great community.
Sorry, there was a problem flagging this post. Please try again now or at a later time.
If you believe this post is offensive or violates the CNET Forums' Usage policies, you can report it below (this will not automatically remove the post). Once reported, our moderators will be notified and the post will be reviewed.
Collapse -
also
by imorphusvortex / October 16, 2007 8:19 AM PDT

also in the conflicting device list it says input/output range 03F8-03FF used by COM1 how do I get rid of com 1

Collapse -
That usually means a driver was missing.
by R. Proffitt Forum moderator / October 17, 2007 12:38 AM PDT
In reply to: also

Windows 2000 Pro is unusual to see today but the office has plenty of them. The most common issue is a missing driver. Microsoft won't get it for you. Look on Toshiba.com or the CDs that came with the machine.

Sorry, I'm letting you search for it and provide links.

Bob

Collapse -
com1
by imorphusvortex / October 16, 2007 8:39 AM PDT

I disabled com1 then conection 2880c , now the red line is gone and there are no conflicts! but still code 29 !!

Popular Forums
icon
Computer Newbies 10,686 discussions
icon
Computer Help 54,365 discussions
icon
Laptops 21,181 discussions
icon
Networking & Wireless 16,313 discussions
icon
Phones 17,137 discussions
icon
Security 31,287 discussions
icon
TVs & Home Theaters 22,101 discussions
icon
Windows 7 8,164 discussions
icon
Windows 10 2,657 discussions

HOLIDAY GIFT GUIDE 2017

Cameras that make great holiday gifts

Let them start the new year with a step up in photo and video quality from a phone.