Dell forum

General discussion

HL-DT-ST-DVD+-RW GSA-T21N ATA, DVD+R Burning problem

by gordony1 / December 27, 2009 1:03 PM PST

Hello there,

I've been having a problem burning DVD Roms with Nero 9.4. But actually it seems whatever program I use, I cannot burn a disc. I've used Power ISO and the same issue. Nero starts off and then when I get to the Lead In part it hangs and spits the disc out. I see a ring around near the centre of the disc and hear a scratching sound before the disc is ejected. I'm attaching the error log from Nero if it helps: Thanks a lot in advance!


AutoRun : 0
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 2046MB (2095872kB)
Free physical memory: 901MB (923520kB)
Memory in use : 55 %
Uncached PFiles: 0x0
Global Bus Type: default (0)
Check supported media : Disabled (0)

28.12.2009
UDF/ISO compilation
12:43:44 PM #1 Text 0 File SCSIPTICommands.cpp, Line 430
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

12:43:45 PM #2 Text 0 File Isodoc.cpp, Line 6998
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Options : automatic
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

12:43:45 PM #3 ISO9660GEN -11 File Geniso.cpp, Line 3327
First writeable address = 0 (0x00000000)

12:43:45 PM #4 ISO9660GEN -11 File Geniso.cpp, Line 3327
First writeable address = 0 (0x00000000)

12:43:45 PM #5 SPTI -1093 File SCSIPassThrough.cpp, Line 215
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1093)
CDB Data: 0x51 00 00 00 00 00 00 00 20 00 00 00
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x06
Sense Qual: 0x00
Sense Area: 0x70 00 02 00 00 00 00 0A B5 80 BB FF 06
Buffer x05869340: Len x20

12:43:45 PM #6 SPTI -1093 File SCSIPassThrough.cpp, Line 215
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1093)
CDB Data: 0x52 01 00 00 00 FF 00 00 20 00 00 00
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x06
Sense Qual: 0x00
Sense Area: 0x70 00 02 00 00 00 00 0A B5 80 BB FF 06
Buffer x05869340: Len x20

12:43:45 PM #7 SPTI -1093 File SCSIPassThrough.cpp, Line 215
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1093)
CDB Data: 0x52 01 00 00 00 FF 00 00 20 00 00 00
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x06
Sense Qual: 0x00
Sense Area: 0x70 00 02 00 00 00 00 0A B5 80 BB FF 06
Buffer x05869340: Len x20

12:43:45 PM #8 Text 0 File Burncd.cpp, Line 3572
Turn on Disc-At-Once, using DVD media

12:43:45 PM #9 SPTI -1093 File SCSIPassThrough.cpp, Line 215
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1093)
CDB Data: 0x51 00 00 00 00 00 00 00 20 00 00 00
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x06
Sense Qual: 0x00
Sense Area: 0x70 00 02 00 00 00 00 0A B5 80 BB FF 06
Buffer x05869340: Len x20

12:43:45 PM #10 SPTI -1093 File SCSIPassThrough.cpp, Line 215
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1093)
CDB Data: 0x52 01 00 00 00 FF 00 00 20 00 00 00
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x06
Sense Qual: 0x00
Sense Area: 0x70 00 02 00 00 00 00 0A B5 80 BB FF 06
Buffer x05869340: Len x20

12:43:45 PM #11 SPTI -1093 File SCSIPassThrough.cpp, Line 215
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1093)
CDB Data: 0x52 01 00 00 00 FF 00 00 20 00 00 00
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x06
Sense Qual: 0x00
Sense Area: 0x70 00 02 00 00 00 00 0A B5 80 BB FF 06
Buffer x05869340: Len x20

12:45:11 PM #12 ISO9660GEN -11 File Geniso.cpp, Line 3327
First writeable address = 0 (0x00000000)

12:45:11 PM #13 ISO9660GEN -11 File Geniso.cpp, Line 3327
First writeable address = 0 (0x00000000)

12:45:12 PM #14 Text 0 File DlgWaitCD.cpp, Line 313
Last possible write address on media: 2295103
Last address to be written: 2203695

12:45:12 PM #15 Text 0 File DlgWaitCD.cpp, Line 325
Write in overburning mode: NO (enabled: CD)

12:45:12 PM #16 Text 0 File DlgWaitCD.cpp, Line 2843
Recorder: HL-DT-ST DVD+-RW GSA-T21N, Media type: DVD+R
Disc Manufacturer ID: <CMC MAG>, Media Type ID: <M01>, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 7

12:45:12 PM #17 Text 0 File DlgWaitCD.cpp, Line 500
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert the disc to write to.
(Medium in drive: Unknown. Medium required by compilation: DVD R/RW, DVD DL, DVD-RAM.)

12:45:12 PM #18 Text 0 File ThreadedTransferInterface.cpp, Line 739
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2203696 (2203696) = #2203696/489:42.46
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2203696 blocks [E: HL-DT-ST DVD+-RW GSA-T21N]
--------------------------------------------------------------

12:45:12 PM #19 Text 0 File ThreadedTransferInterface.cpp, Line 941
Prepare [E: HL-DT-ST DVD+-RW GSA-T21N] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4513169408, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 2203696 | 0 | 0x00
2203696 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

12:45:12 PM #20 Text 0 File SCSIPTICommands.cpp, Line 217
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME

12:45:12 PM #21 Text 0 File Burncd.cpp, Line 4279
Caching options: cache CDRom or Network-Yes, small files-No (<64KB)

12:45:12 PM #22 Phase 24 File dlgbrnst.cpp, Line 1767
Caching of files started

12:45:12 PM #23 Text 0 File Burncd.cpp, Line 4401
Cache writing successful.

12:45:12 PM #24 Phase 25 File dlgbrnst.cpp, Line 1767
Caching of files completed

12:45:12 PM #25 Phase 36 File dlgbrnst.cpp, Line 1767
Burn process started at 4x (5,540 KB/s)

12:45:12 PM #26 Text 0 File ThreadedTransferInterface.cpp, Line 2695
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

12:45:12 PM #27 Text 0 File Cdrdrv.cpp, Line 10282
---- Disc Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-ROM (0), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Transfer Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
Data in Burst Cutting Area (BCA) does not exist
Twin Format Flag: 0
Media Specific [16..783]:
00 00 07 43 4D 43 20 4D - 41 47 00 4D 30 31 00 38 ...CMC.MAG.M01.8
23 54 37 18 00 3E 6E 00 - 70 62 15 15 0B 0B 08 08 #T7..>n.pb......
01 19 1B 0B 0B 0E 0F 01 - 00 00 00 00 00 00 00 00 ................
01 00 38 38 00 1D 62 35 - 07 30 22 10 08 20 1C 01 ..88..b5.0".....
00 00 00 1D 62 35 07 30 - 22 10 08 20 1C 01 00 00 ....b5.0".......
02 00 54 70 02 38 5F 56 - 20 14 0B 0B 01 18 00 00 ..Tp.8_V........
00 00 02 3D 5D 7A 20 14 - 0C 0A 01 18 00 00 00 10 ...=]z..........
03 00 54 DF 02 1F 65 5A - 20 14 0C 0A 01 18 00 00 ..T...eZ........
00 00 02 06 67 86 20 14 - 0C 0A 01 18 00 00 00 89 ....g...........
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00

12:45:12 PM #28 Text 0 File DVDPlusRW.cpp, Line 637
Start write address at LBA 0
DVD high compatibility mode: Yes

12:45:12 PM #29 Text 0 File ThreadedTransfer.cpp, Line 273
Pipe memory size 83836800

12:46:06 PM #30 SPTI -1061 File SCSIPassThrough.cpp, Line 215
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1061)
CDB Data: 0x2A 00 00 00 7A A0 00 00 20 00 00 00
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x44
Sense Qual: 0x90
Sense Area: 0x70 00 04 00 00 00 00 0A 35 00 04 0E 44 90
Buffer x1ce0f580: Len x10000
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

12:46:06 PM #31 CDR -1061 File Writer.cpp, Line 306
Internal target failure
E: HL-DT-ST DVD+-RW GSA-T21N

12:46:06 PM #32 SPTI -1061 File SCSIPassThrough.cpp, Line 215
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1061)
CDB Data: 0x35 02 00 00 00 00 00 00 00 00 00 00
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x44
Sense Qual: 0x90
Sense Area: 0x71 00 04 00 00 00 00 0A 35 00 04 0E 44 90

12:46:06 PM #33 Phase 127 File dlgbrnst.cpp, Line 1767
Generating DVD high compatibility borders

12:46:06 PM #34 Text 0 File DVDPlusRW.cpp, Line 904
EndDAO: Last written address 31392

12:46:06 PM #35 CDR -1061 File WriterStatus.cpp, Line 292
Internal target failure
E: HL-DT-ST DVD+-RW GSA-T21N

12:46:06 PM #36 TRANSFER -24 File WriterStatus.cpp, Line 292
Could not perform end of Disc-at-once

12:46:06 PM #37 Text 0 File DVDPlusDualLayer.cpp, Line 1452
SetDriveCaps: Set LAST LBA of layer 1 to 0

12:46:06 PM #38 Phase 38 File dlgbrnst.cpp, Line 1767
Burn process failed at 4x (5,540 KB/s)

12:46:06 PM #39 Text 0 File SCSIPTICommands.cpp, Line 267
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

12:46:14 PM #40 Text 0 File Cdrdrv.cpp, Line 11592
DriveLocker: UnLockVolume completed

12:46:14 PM #41 Text 0 File SCSIPTICommands.cpp, Line 430
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL


Existing drivers:

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon

Discussion is locked
You are posting a reply to: HL-DT-ST-DVD+-RW GSA-T21N ATA, DVD+R Burning problem
The posting of advertisements, profanity, or personal attacks is prohibited. Please refer to our CNET Forums policies for details. All submitted content is subject to our Terms of Use.
Track this discussion and email me when there are updates

If you're asking for technical help, please be sure to include all your system info, including operating system, model number, and any other specifics related to the problem. Also please exercise your best judgment when posting in the forums--revealing personal information such as your e-mail address, telephone number, and address is not recommended.

You are reporting the following post: HL-DT-ST-DVD+-RW GSA-T21N ATA, DVD+R Burning problem
This post has been flagged and will be reviewed by our staff. Thank you for helping us maintain CNET's great community.
Sorry, there was a problem flagging this post. Please try again now or at a later time.
If you believe this post is offensive or violates the CNET Forums' Usage policies, you can report it below (this will not automatically remove the post). Once reported, our moderators will be notified and the post will be reviewed.
Collapse -
Short answer.
by R. Proffitt Forum moderator / December 28, 2009 12:33 AM PST
Collapse -
Try another drive?
by Osprey4 / December 28, 2009 12:37 AM PST
In reply to: Short answer.

Seriously?

Collapse -
Seriously.
by R. Proffitt Forum moderator / December 28, 2009 1:36 AM PST
In reply to: Try another drive?

These drives have only months of life designed in. After swapping so many over the years you learn the lesson. And yes, we swap it, show it working and then the owner asks to put the old drive back for a test. A few want the old drive fixed. You can only smile.
Bob

Collapse -
Months of life?
by Osprey4 / December 28, 2009 5:21 AM PST
In reply to: Seriously.

Please don't say that too loudly around my Pioneer DVR-109, which has burned a few thousand discs over the past six years.

Collapse -
I have an older Pioneer.
by R. Proffitt Forum moderator / December 28, 2009 9:51 AM PST
In reply to: Months of life?

The only thing it died of was it began to get finicky over media. Finally I wanted to record dual layer and it couldn't.

Ok. The drill?

1. CD/DVD lens cleaner (do not use on BLU RAY!)
2. Upper,lower,filters -> http://www.pchell.com/hardware/cd_drive_error_code_39.shtml AND YES we do this on finicky drives too.
3. Other media.
4. New drive.

Collapse -
Hi, gordony1:
by Osprey4 / December 28, 2009 12:35 AM PST

You'll hardly find worse blank media than CMC Magnetics (CMC MAG M01). My suggestion would be to try something else.

Let me recommend this site for brands to use and those to steer clear of: http://www.digitalfaq.com/reviews/dvd-media.htm

I personally use Verbatim DVD+R almost exclusively and have had maybe 2-3 failures out of thousands of blank DVD discs.

Collapse -
Reply
by gordony1 / December 28, 2009 11:19 PM PST
In reply to: Hi, gordony1:

So I can either chuck it out or try a lens cleaner, right? I tried the deleting registry key and will see how it works out when i try to burn another disc. Thanks.

Popular Forums
icon
Computer Newbies 10,686 discussions
icon
Computer Help 54,365 discussions
icon
Laptops 21,181 discussions
icon
Networking & Wireless 16,313 discussions
icon
Phones 17,137 discussions
icon
Security 31,287 discussions
icon
TVs & Home Theaters 22,101 discussions
icon
Windows 7 8,164 discussions
icon
Windows 10 2,657 discussions

CNET FORUMS TOP DISCUSSION

Help, my PC with Windows 10 won't shut down properly

Since upgrading to Windows 10 my computer won't shut down properly. I use the menu button shutdown and the screen goes blank, but the system does not fully shut down. The only way to get it to shut down is to hold the physical power button down till it shuts down. Any suggestions?