Computer Help forum

Question

Hi, I've just purchased an Asus RT-N66U router and am tryin

by bl1zeH / February 5, 2014 3:09 AM PST

Hi,

I've just purchased an Asus RT-N66U router and am trying to configure my multiple IP addresses (I have a block of 8, or rather 5 usable IPs)

On my previous router I ran the following:

:ip ipadd intf=LocalNetwork addr=IP4/29 addroute=enabled
:ip ipadd intf=LocalNetwork addr=IP3/29 addroute=enabled
:ip ipadd intf=LocalNetwork addr=IP2/29 addroute=enabled
:ip ipadd intf=LocalNetwork addr=IP1/29 addroute=enabled
:ip ipadd intf=LocalNetwork addr=IP0/29 addroute=enabled
:ip ipadd intf=LocalNetwork addr=IP9/29 addroute=enabled
:nat mapadd intf=Static outside_addr IP4 weight 1 index=0
:nat mapadd intf=Static outside_addr=IP9 inside_addr=192.168.1.50 weight=120 access_list IP9
:nat mapadd intf=Static outside_addr=IP9 inside_addr=192.168.1.50 weight=120 access_list 192.168.1.50
:saveall

:nat mapadd intf=Static outside_addr=IP0 inside_addr=192.168.1.51 weight=120 access_list IP0
:nat mapadd intf=Static outside_addr=IP0 inside_addr=192.168.1.51 weight=120 access_list 192.168.1.51
:nat mapadd intf=Static outside_addr=IP1 inside_addr=192.168.1.52 weight=120 access_list IP1
:nat mapadd intf=Static outside_addr=IP1 inside_addr=192.168.1.52 weight=120 access_list 192.168.1.52
:nat mapadd intf=Static outside_addr=IP2 inside_addr=192.168.1.53 weight=120 access_list IP2
:nat mapadd intf=Static outside_addr=IP2 inside_addr=192.168.1.53 weight=120 access_list 192.168.1.53
:nat mapadd intf=Static outside_addr=IP3 inside_addr=192.168.1.54 weight=120 access_list IP3
:nat mapadd intf=Static outside_addr=IP3 inside_addr=192.168.1.54 weight=120 access_list 192.168.1.54
:service system ipdelete name=TELNET ip=149.255.104.16
:saveall


Someone helped me configure it, and honestly I don't know where to start in writing that for the new router, or if it's even required?

Has anyone used one of the Asus routers (firmware version 3.0.0.4.374_979-gbc8961e) and successfully managed to configure multiple WAN IP addresses? I was hoping there would be something in the control panel, but I can't find anything.

Thanks!

Discussion is locked
You are posting a reply to: Hi, I've just purchased an Asus RT-N66U router and am tryin
The posting of advertisements, profanity, or personal attacks is prohibited. Please refer to our CNET Forums policies for details. All submitted content is subject to our Terms of Use.
Track this discussion and email me when there are updates

If you're asking for technical help, please be sure to include all your system info, including operating system, model number, and any other specifics related to the problem. Also please exercise your best judgment when posting in the forums--revealing personal information such as your e-mail address, telephone number, and address is not recommended.

You are reporting the following post: Hi, I've just purchased an Asus RT-N66U router and am tryin
This post has been flagged and will be reviewed by our staff. Thank you for helping us maintain CNET's great community.
Sorry, there was a problem flagging this post. Please try again now or at a later time.
If you believe this post is offensive or violates the CNET Forums' Usage policies, you can report it below (this will not automatically remove the post). Once reported, our moderators will be notified and the post will be reviewed.

All Answers

Collapse -
Answer
Keep an eye on this similar or same request.
by R. Proffitt Forum moderator / February 5, 2014 3:40 AM PST
Collapse -
Reply
by bl1zeH / February 5, 2014 7:20 AM PST
In reply to: Found more!

Yes, sorry, as you may have guessed I'm pretty desperate to get this working, as it's really messing up my work - I don't want to have to resort to buying a new router when I've just spent £100+ on one...

Collapse -
" my previous router "
by R. Proffitt Forum moderator / February 5, 2014 7:25 AM PST
In reply to: Reply

Since you have that and David claims he did that, you have no less than 3 options (ASUS support.)

Out of curiosity why buy a new router when you have a working one?

And why keep one that doesn't work or have support for you?

Yes, I wrote router code (the code that's inside routers) a long time ago but such setups are maintained by IT staffers (or me if paid to do so) which can cause trouble if folk can't get support or don't want to pay for such. I didn't find a ready reference to cure your issue or write a new script so let's let David who claims they did this cure this one?
Bob

Collapse -
Reply
by bl1zeH / February 5, 2014 5:28 PM PST
In reply to: " my previous router "

Thank you for the reply, I purchased a new router since I've just moved from ADSL to a fiber connection and my old Thomson router wasn't compatible. I'm hoping I can get the new Asus router because it gets fantastic reviews and was actually rather expensive...

I would be happy to pay for help with this, very happy to pay for help, as I did previously for the above code.

Collapse -
Time to see if the prior paid help can come back.
by R. Proffitt Forum moderator / February 6, 2014 1:30 AM PST
In reply to: Reply

Your support might have to come on site to test out scripts and more. But at this point my advice is to get to that David and see how they solved it. Might be the best avenue.

Asus is the next choice as you find your old contacts.
Bob

Popular Forums
icon
Computer Newbies 10,686 discussions
icon
Computer Help 54,365 discussions
icon
Laptops 21,181 discussions
icon
Networking & Wireless 16,313 discussions
icon
Phones 17,137 discussions
icon
Security 31,287 discussions
icon
TVs & Home Theaters 22,101 discussions
icon
Windows 7 8,164 discussions
icon
Windows 10 2,657 discussions

CNET FORUMS TOP DISCUSSION

Help, my PC with Windows 10 won't shut down properly

Since upgrading to Windows 10 my computer won't shut down properly. I use the menu button shutdown and the screen goes blank, but the system does not fully shut down. The only way to get it to shut down is to hold the physical power button down till it shuts down. Any suggestions?