With the 2400g you don't need the GPU (video card) and no HDD, SSD or other drives. Just one stick of RAM and little else. Most common gaffe is motherboard mounting and the CMOS clear jumper on the wrong pins. Next is hooking up all the wires. We only need one connection which is the PWRON connection.
Still no life. Time to put the motherboard in its box and build with min parts there (no case.)
Need help, can't get signal on monitor.
ASRock b450m hdv
Ryzen 5 2400g
AMD rx 580
EVGA 500 80 Bronze
8 GB DDR4 Gskill 3200mhz
I have built a new pc and connected all of the cables correctly,checked a few times if something isn't connected well but everthing was fine. All fans are spinning when the pc is turned ,I also restarted the CMOS with the jumper on the mobo , I tried to connect to the monitor with hdmi on the gpu, I tried another monitor with vga to mainboard, I have tried using both ram slots , I tried changing display otput on monitor who you need to set up manually, there were no beeps, I also used an antistatic wristband while I was building the pc. What should i do? I spent hours and hours viewing forum and tutorials what could be wrong but I tried everthing and nothing worked. I have also tried taking out the cpu and motherboard alltogether an connecting everything again, I have tried running on only the psu, apu and motherboard and later added the ram but still no luck. Please help me if you have some useful information or ideas.