Camcorders forum


download from camcoder to PC

by JenKab / May 29, 2013 2:35 AM PDT

Hello !
I want to write video from my camcoder. For this reason I bought 1394 Controller Card , installed and connected my camcoder to this board with DV cable.

I fault to write Audio section of my video , when video section appeared copied properly.

Do anybody know what was the reason ?

Discussion is locked
You are posting a reply to: download from camcoder to PC
The posting of advertisements, profanity, or personal attacks is prohibited. Please refer to our CNET Forums policies for details. All submitted content is subject to our Terms of Use.
Track this discussion and email me when there are updates

If you're asking for technical help, please be sure to include all your system info, including operating system, model number, and any other specifics related to the problem. Also please exercise your best judgment when posting in the forums--revealing personal information such as your e-mail address, telephone number, and address is not recommended.

You are reporting the following post: download from camcoder to PC
This post has been flagged and will be reviewed by our staff. Thank you for helping us maintain CNET's great community.
Sorry, there was a problem flagging this post. Please try again now or at a later time.
If you believe this post is offensive or violates the CNET Forums' Usage policies, you can report it below (this will not automatically remove the post). Once reported, our moderators will be notified and the post will be reviewed.

All Answers

Collapse -
Not without a lot more details.
by R. Proffitt Forum moderator / May 29, 2013 3:12 AM PDT

For years I used WinDV (see google) to capture the video and VLC Player (see google) to play the capture. Your post is not complete so my guess is that you don't have all the parts and software to make this work.

Collapse -
download from camcoder to PC
by JenKab / May 29, 2013 6:50 AM PDT

Thank for reply

I wanted to ask if dv cable connected to the PC anought to transfer video and AUDIO from camcorder to PC and I
have to look for the problemm in Ulead VideoStudio settings (may be you know which exactly) or AUDIO must be connected by separate cable to PC.


Collapse -
by R. Proffitt Forum moderator / May 29, 2013 6:53 AM PDT

But here I used WinDV for years to transfer/capture over firewire.

It's not correct to write transfer since the video remains in the camcorder/tape. I never had to connect up the audio but my bet is that if you don't use the other tools you may have to suffer with issues like this.

Let me be blunt. Try it with the apps I used back then. They are free and documented on the web.

Popular Forums
Computer Newbies 10,686 discussions
Computer Help 54,365 discussions
Laptops 21,181 discussions
Networking & Wireless 16,313 discussions
Phones 17,137 discussions
Security 31,287 discussions
TVs & Home Theaters 22,101 discussions
Windows 7 8,164 discussions
Windows 10 2,657 discussions


Help, my PC with Windows 10 won't shut down properly

Since upgrading to Windows 10 my computer won't shut down properly. I use the menu button shutdown and the screen goes blank, but the system does not fully shut down. The only way to get it to shut down is to hold the physical power button down till it shuts down. Any suggestions?