Question

Display adapter (GPU) Not recognized in device manager HELP!

May 25, 2018 3:08PM PDT

My gtx 1050ti isnt recognized in BIOS on in Device Managed it just shows a “Basic Display Adapter” with a triangle on it. My gpu fans both spin. Help!

Discussion is locked

Follow
Reply to: Display adapter (GPU) Not recognized in device manager HELP!
PLEASE NOTE: Do not post advertisements, offensive materials, profanity, or personal attacks. Please remember to be considerate of other members. If you are new to the CNET Forums, please read our CNET Forums FAQ. All submitted content is subject to our Terms of Use.
Reporting: Display adapter (GPU) Not recognized in device manager HELP!
This post has been flagged and will be reviewed by our staff. Thank you for helping us maintain CNET's great community.
Sorry, there was a problem flagging this post. Please try again now or at a later time.
If you believe this post is offensive or violates the CNET Forums' Usage policies, you can report it below (this will not automatically remove the post). Once reported, our moderators will be notified and the post will be reviewed.
Comments
- Collapse -
Clarification Request
Not much about the PC.
May 25, 2018 3:39PM PDT

Is the BIOS current?
Is the GPU in the right slot?
Did the person who installed Windows know to install the latest BIOS and motherboard drviers?

- Collapse -
One slot
May 25, 2018 4:02PM PDT

There is only one gpu slot i have a mini itx. I will re do the drivers

- Collapse -
Mini ITX?
May 25, 2018 4:17PM PDT

Many of those have sub standard power supplies. I find many builders scared of the BIOS updates. Good news for repair counters?

- Collapse -
?
May 25, 2018 5:27PM PDT

WHat?

- Collapse -
As the builder
May 25, 2018 6:49PM PDT

I do expect you to know what a BIOS update is and what the make, model of the PSU so you can share it here so all can check it out.

- Collapse -
Ok
May 26, 2018 5:38AM PDT

Motherboard is a asus strix b250i and the power supply is a corsair CX650M

- Collapse -
And does it have the Version 1205 2018/05/25 BIOS update?
May 26, 2018 6:03AM PDT

I see this note: "STRIX B250I GAMING BIOS 1205
Intel New ME Update, Improve Stability."

That's also can mean more support of boards and such.

The PSU looks like a normal PSU and reviewed well at https://www.tomshardware.com/reviews/corsair-cx650m-psu,4770.html

I did ask about the BIOS and you didn't note it got done. There are also CPUs that are not supported and the details are not showing up in your posts. It's clear you don't know how working problems like this progresses. You post a lot of detail with the problem and folk give you ideas to work.

You reply with the work done or why you didn't. I'm starting off as if it's the usual.

Eventually this GPU has to be tested in another PC but there's hope it doesn't need that yet.

https://www.reddit.com/r/pcmasterrace/comments/6rc7jo/new_geforce_1050ti_causing_pc_to_get_stuck_at_bios/ kicks this around and asks another question. I can't tell if your 1050 requires a power connection. Please folk, full details.

- Collapse -
My bad
May 26, 2018 6:48AM PDT

Sorry for being unclear brotha. So i have a 6-pin gtx 1050ti OC edition by PNY. Its connected to a 6+2 pin PSU Cabel. I just leave the extra 2-pin cable hanging. The fans spin in the motherboard. Im a troubled man when it comes to drivers. I do have a theory though. Is my gpu not showing up because i do not have the DVI-D cable plugged in to my gpu to my monitor? Or no? Thats the only reason i could think of why it isnt detected.

- Collapse -
Fans
May 26, 2018 6:49AM PDT

I said the fans spin in the motherbord i meant the GPU fans spin.

- Collapse -
And does it have the Version 1205 2018/05/25 BIOS update?
May 27, 2018 9:10AM PDT

And does it have the Version 1205 2018/05/25 BIOS update?

I found no answer to this question.

- Collapse -
Yes
May 27, 2018 9:45AM PDT

Yes. Would it be because i dont have the vga cable plugged in from gpu to monitor?

- Collapse -
I have to ask.
May 27, 2018 11:00AM PDT

If you " dont have the vga cable plugged in from gpu to monitor?" why would you expect this card to work?

That is, when I install a new card I use my monitor on this card while I set it up.
If I get no display, I know something's very wrong.

- Collapse -
True
May 28, 2018 3:09AM PDT

I figured it out. My bios wont recognize my gpu because i put in my gpu like 3 months after i built my pc because i was on vacation. So i have my motherboard plugged into my monitor through HMDI. My built has been used INTEGRATED **** GRAPHICS. I plugged in my gpu and bios never recognized it which i think would be normal since i havnt had it in since the beginning. I need to get a DVI cable for my gpu to monitor. Do i need my motherboard and gpu plugged in? Or just my GPU? And will my GPU never displayed when i plugged it into my monitor through hmdi. Hmmm?

- Collapse -
?
May 25, 2018 6:06PM PDT

WHat?

- Collapse -
Clarification Request
drivers
May 25, 2018 6:33PM PDT

Did you install the driver files for the video card?

CNET Forums

Forum Info