HolidayBuyer's Guide

Android forum

Question

Desktop PC USB charging

by roysumit1 / January 23, 2016 6:58 PM PST

There is clumsy problem happening...
I charge my mobile thru pc USB it gets charged till battery full but after full it pop up on windows that " device not recognised ".
I did one thing, I use my mobile so to reduce battery bar from full to lower and then connect it repeats same problem ie " device not recognised " when battery finishes full charged but before reaching full it is ok no pop up comes that time.

I find the same problem when I do USB tether for net access ie I can access internet untill battery reaches full and after full it displays "device not recognised" and internet got disconnected.

pls note that I can transfer data to and from pc and mobile as that would not have been possible if data port pin of pc or mobile damaged.

I uninstall my driver and reinstall which got auto installation after mobile got connected to pc but problem persist.

I did not try my pc USB port with other mobile to find whether same thing to happen but could you tell what could be train.
PC configuration
Windows 7 professtion 64bit
Intel 2.4 GHz
4 GB RAM
160gb HD
Mobile type
micromax AQ4501
OS Marshmallows 6.0.1

Discussion is locked
You are posting a reply to: Desktop PC USB charging
The posting of advertisements, profanity, or personal attacks is prohibited. Please refer to our CNET Forums policies for details. All submitted content is subject to our Terms of Use.
Track this discussion and email me when there are updates

If you're asking for technical help, please be sure to include all your system info, including operating system, model number, and any other specifics related to the problem. Also please exercise your best judgment when posting in the forums--revealing personal information such as your e-mail address, telephone number, and address is not recommended.

You are reporting the following post: Desktop PC USB charging
This post has been flagged and will be reviewed by our staff. Thank you for helping us maintain CNET's great community.
Sorry, there was a problem flagging this post. Please try again now or at a later time.
If you believe this post is offensive or violates the CNET Forums' Usage policies, you can report it below (this will not automatically remove the post). Once reported, our moderators will be notified and the post will be reviewed.
Collapse -
Clarification Request
Let's hear a little more.
by R. Proffitt Forum moderator / January 24, 2016 9:02 AM PST

Your topic is about charging. So is it charging or not?

If you want to discuss the USB tether and driver issue, then I will wait for you to tell me more about the make/model PC and exactly which AQ4501 USB driver you installed.

Collapse -
Does my English too bad to make understand other
by roysumit1 / January 24, 2016 10:27 AM PST

My mobile is charging but I said and repeated many times in my previous post that as charging of battery full then suddenly a pop up comes in pc screen "device not recognised". but mobile keep on charging which confirms by battery charging symbol in mobile screen.

As soon as battery reaches full this problem arise, say if I use for net by USB tether I do the same without any probs and side by side battery also getting charging but as soon as battery charging reaches full then pop up appears" device not recognised " and USB tether broke. When battery full pc can't detect it.

To overcome this I disconnect my mobile from usb, use my mobile so to make battery bar for less than 90% After that I connect my mobile to pc , then everything is fine say USB tethering I can do net where it keep on charging but as soon as it reaches full then device not recognised by pc.

About USB tethering clarification I use assembled pc whose configuration already mentioned. About usb driver I did not install by manual downloading.
When I connected my mobile for first time it auto detect by pc and it installed 5 to 6 drivers,pls note that I formatted my pc recently.

Also pls note that I can transfer data from USB cable to pc but provided battery bar less than full, as soon as it full data transfer broke and device not recognised.

Hope make you understand the matter bby my bad English.

Collapse -
Sounds like a driver bug.
by R. Proffitt Forum moderator / January 24, 2016 12:16 PM PST

"I will wait for you to tell me more about the make/model PC and exactly which AQ4501 USB driver you installed."

I'll also wait for more PC details.

Collapse -
Guide to see driver details
by roysumit1 / January 25, 2016 7:21 PM PST

I have asmebled pc whose configuration intel dual core
2.3 Ghz processor, 4GB ddr3 RAM,
450W power supply,
gigabyte motherboard model GA J1800M D2PN,
WD 160GB HDD,
LG DVD writer,
Window 7 64 bit professional,

pls tell how to see the driver details of AQ4501 in window 7

Collapse -
RE pls tell how to see the driver details of AQ4501 in windo
by R. Proffitt Forum moderator / January 26, 2016 2:12 AM PST

In this case you tell me the driver you installed for the AQ4501.

All Answers

Collapse -
Answer
pc
by Rozapk / January 29, 2016 9:38 AM PST

In this case you tell me the driver you installed for the AQ4501

Popular Forums
icon
Computer Newbies 10,686 discussions
icon
Computer Help 54,365 discussions
icon
Laptops 21,181 discussions
icon
Networking & Wireless 16,313 discussions
icon
Phones 17,137 discussions
icon
Security 31,287 discussions
icon
TVs & Home Theaters 22,101 discussions
icon
Windows 7 8,164 discussions
icon
Windows 10 2,657 discussions

HOLIDAY GIFT GUIDE 2017

Cameras that make great holiday gifts

Let them start the new year with a step up in photo and video quality from a phone.