CNET también está disponible en español.

Ir a español

Don't show this again

Stress test extraordinaire

We test dishwashers by pushing them past their limits to see where those limits are, and to learn what they're good at and what they aren't. Here's our process for putting dishwashers to the test.

Published:
Photo by: Tyler Lizenby/CNET

Crafting a cleaning test

Combining some elements from the tests of the Association of Home Appliance Manufacturers (AHAM) and the International Electrotechnical Commission (IEC) with some of our own ideas, we set some tough tasks for our dishwashers. Our most intricate and lengthy test checks a dishwasher's cleaning and drying capabilities, but we're also taking notes about performance, features and usability along the way.

Published:
Photo by: Tyler Lizenby/CNET

A full plate of food

We start with 112 dishes and pieces of flatware. We make sure they're all perfectly clean and dry, so the only dirt on them when we load them into the dishwasher will be the dirt we put there. Then, we collect our foods. Our mix of foods is selected to test the different capabilities of a dishwasher. Honey, egg and peanut butter task it with removing sticky substances. Spinach and macaroni and cheese see how well its filter deals with bulk.

Published:
Photo by: Tyler Lizenby/CNET

Precisely measured

Then, it's time to prep and measure the food. For each food, referred to as soil, we have a specific application process and a specific amount we use every time.

Published:
Photo by: Tyler Lizenby/CNET

The application

Once the food's ready, we spread it on the plate. The small plates get half covered in raspberry preserves, and half covered in mashed potatoes.

Published:
Photo by: Tyler Lizenby/CNET

Food art

The large plates get a quarter each of eggs, spinach, mac & cheese, and honey. When we're done, they almost look like a child's art project.

Published:
Photo by: Tyler Lizenby/CNET

Silverware too

We need to see how well the dishwasher cleans silverware too, and these items get coated with plenty of food as well.

Published:
Photo by: Tyler Lizenby/CNET

A coating for the glasses

The wine glasses get a coat of red wine. We coat coffee cups and saucers in coffee, and drinking glasses in tomato juice and grape juice.

Published:
Photo by: Tyler Lizenby/CNET

Stacked and waiting

Once we've slathered every dish with food, we stack the plates and bowls on a rack so they don't touch each other and mess up our work. Then, we let the dirty dishes sit out for 24 hours.

Published:
Photo by: Tyler Lizenby/CNET

Time to load

After 24 hours, we stack and load the dishes, following the manufacturer's recommended loading pattern.

Published:
Photo by: Tyler Lizenby/CNET

A completed bottom rack

Here's the completely loaded bottom rack of the GE PDT750SSFSS.

Published:
Photo by: Tyler Lizenby/CNET

Loading the upper rack

Glasses and bowls tend to go on the upper rack.

Published:
Photo by: Tyler Lizenby/CNET

A complete upper rack

Here's a complete upper rack, again showing the GE PDT750SSFSS.

Published:
Photo by: Tyler Lizenby/CNET

Ready to run

Then, it's time to run the dishwasher. For our tests, we use the normal cycle with no add-ons, because other cycles vary wildly from dishwasher to dishwasher, and we want to compare apples-to-apples results.

Read full review
Published:
Photo by: Tyler Lizenby/CNET
Editors' Rating

Visit manufacturer site for details.

The aftermath

Once the dishwasher cycle finishes, we allow the machine to rest for 30 minutes. We're grading it on both cleanliness and dryness of dishes, and we give it a chance to help itself on the latter with residual heat.

Published:
Photo by: Tyler Lizenby/CNET

Careful examination

After the 30-minute timer sounds, we remove the dishes one by one, and inspect them under a 4-foot LED array set to a specific color temperature. We look for any drops of water or water marks, as well as any remaining spots of food.

Published:
Photo by: Tyler Lizenby/CNET

Finding flaws

We look for leftover spots like this one, as it tells us the water jets didn't get a strong-enough stream to this dish. That way we can tell you how good each dishwasher is at its job.

Published:
Photo by: Tyler Lizenby/CNET

Making the grade

We grade the dishes based on the number and size of food spots and water spots we find, giving a separate numerical score for cleanliness and dryness for each dish. We plug those scores into an equation and get a total percent dry and clean score for the dishwasher.

Published:
Photo by: Tyler Lizenby/CNET

REVIEW

The most beautiful phone ever has one wildly annoying issue

he Samsung Galaxy S8's fast speeds and fantastic curved screen make it a top phone for 2017, but the annoying fingerprint reader could sour your experience.

Hot Products