CNET también está disponible en español.

Ir a español

Don't show this again

Christmas Gift Guide
Here's how to hack a Harmony Remote to control more devices (full article).

First, connect your remote to your PC using a USB cable. Log onto your MyHarmony.com account and select your remote.

Caption by / Photo by Screenshot by David Katzmaier/CNET
Click "Your devices" and choose an existing device to "piggy-back" the new "phantom" device you want to add. Choose a device you know will be active (powered on) during the new activity you'll create to associate with the phantom device you're adding. I chose my Panasonic TV since I know it needs to be on to watch TV via a Roku. If you're adding an audio-only device you may want to choose your AV receiver or home theater system instead.

On the next page, choose "Add or fix command."

Caption by / Photo by Screenshot by David Katzmaier/CNET
Click the "Add a missing command" radio button and name the command. You'll want to use a name that corresponds to one of the remote buttons of the phantom device. To avoid confusion and repetition, and to group the new commands together, I suggest you preface this and all succeeding names with a unique designation, such as "a Roku" (the "a" floats it to the top of an alphabetical list). Hit the Next button.
Caption by / Photo by Screenshot by David Katzmaier/CNET
Follow the instructions to "teach" the new command. The button you press on the phantom device's remote should correspond with the name you chose in Step 4. Hit the Finish button.

Repeat for every key on the phantom device's remote control. Don't forget the right/left/up/down cursor keys! Only exclude keys you're sure you'll never use.

Caption by / Photo by Screenshot by David Katzmaier/CNET
Click "Home" on the upper left and choose "Your Activities," then "Add Activity," then "Additional Custom." Hit "Next."
Caption by / Photo by Screenshot by David Katzmaier/CNET
Name the new activity, typically something related to your phantom device like "Watch Roku." Hit "Next."
Caption by / Photo by Screenshot by David Katzmaier/CNET
Choose the devices your new activity will use, making sure to include the "piggy-back" device you taught the new commands for the phantom device (such as the TV). Choose the inputs as instructed, and hit "Finish."
Caption by / Photo by Screenshot by David Katzmaier/CNET
Click "Buttons" in the upper left, click the down arrow next to the second pull-down menu (the one below "Change what a button does") and select the activity you created in Step 7.
Caption by / Photo by Screenshot by David Katzmaier/CNET
On the "Change What a Button Does" screen under "Device," choose the piggy-back device. Follow the instructions to assign all of those new commands to the buttons you want. Hit "OK" when finished.
Caption by / Photo by Screenshot by David Katzmaier/CNET
Repeat the previous two steps, but instead use the first "Buttons" pull-down menu, the one under "Change your screen options."
Caption by / Photo by Screenshot by David Katzmaier/CNET
[Optional. Perform this step only if your phantom device needs to be turned on and off along with the activity. For some devices like Roku that stay "on" all the time, this step isn't necessary.] Hit "Activities" on the left menu, select the new activity and hit "Customize this activity." Under "Activity startup commands" choose "Add step," select the piggy-backed device, choose "IR Command" under "Action," and the new command for Power on your phantom device under "Value." Repeat for "Activity shutdown commands."

Sync your changes using the yellow pull-down in the upper right. You're done!

Caption by / Photo by Screenshot by David Katzmaier/CNET
Updated:
Up Next
Tech Turkeys 2017: The lowest point...
54