CNET también está disponible en español.

Ir a español

Don't show this again

Nearing completion

Balancing Act

All in pieces

Down the line

Next stop: Angola

Full scale

On the nose

The general manager of Boeing's 777 program

Winging it

Section by section

Fuselage cross section

Wall section

Turn around

Interior wall sections

On high

Ready for the engine

Engine on

Out the door

Everett, Wash.--In one of the world's largest buildings, Boeing conducts final assembly of its 787, 777, 767, and 747 aircraft. The immense, 98.3-acre facility can produce one 777 aircraft every three days for a total of seven planes per month (Boeing will increase production to eight aircraft per month next year). It takes 49 days to complete final assembly on an airliner.

In this photo, a 777-300 for Air China is nearing completion on the production line. The engines have been installed, and the cabin interior is being outfitted with seats and furnishings.

Updated: / Caption: / Photo: Kent German/CNET
1
of 18

Nearing completion

Balancing Act

All in pieces

Down the line

Next stop: Angola

Full scale

On the nose

The general manager of Boeing's 777 program

Winging it

Section by section

Fuselage cross section

Wall section

Turn around

Interior wall sections

On high

Ready for the engine

Engine on

Out the door

The rudder is painted before it is installed to ensure that it balances correctly on the vertical stabilizer. Later, after the aircraft is rolled out of the factory, the rest of the 777 will be painted with the airline's full livery. In the background is a 787 destined for Royal Air Maroc.
Updated: / Caption: / Photo: Kent German/CNET
2
of 18

Nearing completion

Balancing Act

All in pieces

Down the line

Next stop: Angola

Full scale

On the nose

The general manager of Boeing's 777 program

Winging it

Section by section

Fuselage cross section

Wall section

Turn around

Interior wall sections

On high

Ready for the engine

Engine on

Out the door

Many of the 777's sections are built in other facilities. Here you can see fuselage sections awaiting assembly. Until then, technicians begin to outfit the interior.
Updated: / Caption: / Photo: Kent German/CNET
3
of 18

Nearing completion

Balancing Act

All in pieces

Down the line

Next stop: Angola

Full scale

On the nose

The general manager of Boeing's 777 program

Winging it

Section by section

Fuselage cross section

Wall section

Turn around

Interior wall sections

On high

Ready for the engine

Engine on

Out the door

Further down the line sit more 777s in various stages of completion. The aircraft in the foreground will be delivered to Angola Airlines. The white neon sign in the background identifies the "Twin Aisle Cafe," an employee cafeteria (the 777 has two passenger aisles).
Updated: / Caption: / Photo: Kent German/CNET
4
of 18

Nearing completion

Balancing Act

All in pieces

Down the line

Next stop: Angola

Full scale

On the nose

The general manager of Boeing's 777 program

Winging it

Section by section

Fuselage cross section

Wall section

Turn around

Interior wall sections

On high

Ready for the engine

Engine on

Out the door

Most of the 777s have signs that show the airline customer. The Angola Airlines aircraft will be the fifth 777-300 for the airline.
Updated: / Caption: / Photo: Kent German/CNET
5
of 18

Nearing completion

Balancing Act

All in pieces

Down the line

Next stop: Angola

Full scale

On the nose

The general manager of Boeing's 777 program

Winging it

Section by section

Fuselage cross section

Wall section

Turn around

Interior wall sections

On high

Ready for the engine

Engine on

Out the door

Here you can see the immense size of Boeing's Everett facility. At 472.3 million cubic feet, it's the largest building by volume in the world.
Updated: / Caption: / Photo: Kent German/CNET
6
of 18

Nearing completion

Balancing Act

All in pieces

Down the line

Next stop: Angola

Full scale

On the nose

The general manager of Boeing's 777 program

Winging it

Section by section

Fuselage cross section

Wall section

Turn around

Interior wall sections

On high

Ready for the engine

Engine on

Out the door

Until it's painted, the metal skin of the aircraft is a sea green color.
Updated: / Caption: / Photo: Kent German/CNET
7
of 18

Nearing completion

Balancing Act

All in pieces

Down the line

Next stop: Angola

Full scale

On the nose

The general manager of Boeing's 777 program

Winging it

Section by section

Fuselage cross section

Wall section

Turn around

Interior wall sections

On high

Ready for the engine

Engine on

Out the door

Larry Loftis, vice president and general manager of Boeing's 777 program, led us around the factory.
Updated: / Caption: / Photo: Kent German/CNET
8
of 18

Nearing completion

Balancing Act

All in pieces

Down the line

Next stop: Angola

Full scale

On the nose

The general manager of Boeing's 777 program

Winging it

Section by section

Fuselage cross section

Wall section

Turn around

Interior wall sections

On high

Ready for the engine

Engine on

Out the door

A crane on the factory's ceiling hoists a 777 wing frame into place. Fuel tanks will be installed inside the wing's structure while the flaps, ailerons, and skin will be added later. The factory has 26 such cranes running on 39 miles of track. A 777 crane can lift up to 40 tons.
Updated: / Caption: / Photo: Kent German/CNET
9
of 18

Nearing completion

Balancing Act

All in pieces

Down the line

Next stop: Angola

Full scale

On the nose

The general manager of Boeing's 777 program

Winging it

Section by section

Fuselage cross section

Wall section

Turn around

Interior wall sections

On high

Ready for the engine

Engine on

Out the door

Here is a 777 nose section that's just arrived at the factory. The open area at the bottom will become the wheel well that will accommodate the nose landing gear when retracted.
Updated: / Caption: / Photo: Kent German/CNET
10
of 18

Nearing completion

Balancing Act

All in pieces

Down the line

Next stop: Angola

Full scale

On the nose

The general manager of Boeing's 777 program

Winging it

Section by section

Fuselage cross section

Wall section

Turn around

Interior wall sections

On high

Ready for the engine

Engine on

Out the door

Here's a cross section of a 777 fuselage. The cargo hold will take up the bottom space while the framing above will support the floor of the passenger cabin.
Updated: / Caption: / Photo: Kent German/CNET
11
of 18

Nearing completion

Balancing Act

All in pieces

Down the line

Next stop: Angola

Full scale

On the nose

The general manager of Boeing's 777 program

Winging it

Section by section

Fuselage cross section

Wall section

Turn around

Interior wall sections

On high

Ready for the engine

Engine on

Out the door

Nearby was a section of the cabin wall complete with window holes.
Updated: / Caption: / Photo: Kent German/CNET
12
of 18

Nearing completion

Balancing Act

All in pieces

Down the line

Next stop: Angola

Full scale

On the nose

The general manager of Boeing's 777 program

Winging it

Section by section

Fuselage cross section

Wall section

Turn around

Interior wall sections

On high

Ready for the engine

Engine on

Out the door

The body section turn fixture is used to inspect 777 fuselage sections, rotating them slowly.
Updated: / Caption: / Photo: Kent German/CNET
13
of 18

Nearing completion

Balancing Act

All in pieces

Down the line

Next stop: Angola

Full scale

On the nose

The general manager of Boeing's 777 program

Winging it

Section by section

Fuselage cross section

Wall section

Turn around

Interior wall sections

On high

Ready for the engine

Engine on

Out the door

Interior wall sections complete with window holes are stacked on the factory floor.
Updated: / Caption: / Photo: Kent German/CNET
14
of 18

Nearing completion

Balancing Act

All in pieces

Down the line

Next stop: Angola

Full scale

On the nose

The general manager of Boeing's 777 program

Winging it

Section by section

Fuselage cross section

Wall section

Turn around

Interior wall sections

On high

Ready for the engine

Engine on

Out the door

The tail section of an Emirates 777 towers above the factory floor.
Updated: / Caption: / Photo: Kent German/CNET
15
of 18

Nearing completion

Balancing Act

All in pieces

Down the line

Next stop: Angola

Full scale

On the nose

The general manager of Boeing's 777 program

Winging it

Section by section

Fuselage cross section

Wall section

Turn around

Interior wall sections

On high

Ready for the engine

Engine on

Out the door

The engine pod is suspended from the wing by a pylon. In this photo, a pylon on the port wing of a 777 is readied before the engine is installed.
Updated: / Caption: / Photo: Kent German/CNET
16
of 18

Nearing completion

Balancing Act

All in pieces

Down the line

Next stop: Angola

Full scale

On the nose

The general manager of Boeing's 777 program

Winging it

Section by section

Fuselage cross section

Wall section

Turn around

Interior wall sections

On high

Ready for the engine

Engine on

Out the door

Further up the production line, an engine had already been hung below the wing.
Updated: / Caption: / Photo: Kent German/CNET
17
of 18

Nearing completion

Balancing Act

All in pieces

Down the line

Next stop: Angola

Full scale

On the nose

The general manager of Boeing's 777 program

Winging it

Section by section

Fuselage cross section

Wall section

Turn around

Interior wall sections

On high

Ready for the engine

Engine on

Out the door

At the end of the production line, a 777 is days from its roll out. Wing control surfaces have been installed, and workers are adding the final pieces. Just below the sweep of the wing on the factory wall is a screen that shows the progress of each aircraft on the line.
Updated: / Caption: / Photo: Kent German/CNET
18
of 18
Up Next

The 26 greatest alien encounter movies, ranked