CNET también está disponible en español.

Ir a español

Don't show this again

Christmas Gift Guide
Tech Industry

Sourcing in China not a sure bet

A five-dimension analytical model for deciding when--and when not--to purchase from the East.

Sourcing in China not a sure bet
By strategy+business
Special to CNET
February 7, 2005, 10:00 AM PST

For one U.S. automotive supplier a few years ago, it seemed that purchasing components from China was the right thing to do--and quickly. Manufacturers in virtually every industry were setting up shop in China; to read about it in the business press, every venture paid off. The industrial manufacturer, though, discovered to its dismay that success in China was not a sure thing.

Enticed by attractive price quotes, the manufacturer failed to make completely sure that its Chinese partners could live up to its technical and logistical requirements. When the Chinese suppliers struggled to meet production schedules, the manufacturer was forced to use expensive airfreight. Quality issues also surfaced; the suppliers lacked the skills to maintain process control and implement engineering changes. The combination of problems eroded the expected cost savings. Ultimately, the automotive supplier reduced its Chinese procurement effort.

With Western companies rushing to China to fill gaps or strengthen links across their supply chains, one particular part of their operations--procurement --deserves special scrutiny. If approached with a rigorous evaluation of product characteristics, Chinese component purchasing can be the right answer for optimal management of the supply chain. When not well planned and carefully analyzed, sourcing in China can be the source of woe.

Gold rush
The China "gold rush" grew out of a dilemma. In recent years, when companies examined their profits and losses, most found that purchased material was the largest line item--typically 40 percent to 70 percent of the total cost of goods. In the face of relentless market pressure to keep prices down, procurement often became a prime target for cost reductions. But that well, for many companies, has begun to run dry. Thus, businesses are increasingly looking to nondomestic sources to meet cost-reduction demands.

Asia, especially China, is the most apparent solution. It has the cheapest labor, a pro-business environment, a productive work force, and strong government support for keeping domestic manufacturing operations as inexpensive as possible--a direct path to easy cost cutting.

The time delay generated by the longer supply chain significantly increases the chances of both stock-outs in the near term, and excess and obsolete inventory in the long term.

The supply chain's headlong tilt toward China can be seen in the percentage share of supplier contracts awarded in the past six years. In 1998, at one U.S. auto manufacturer, U.S. and Canadian companies garnered 62 percent of all quotes and supplier contracts, and Asian (primarily Chinese) outfits only 4 percent. By 2002, the two regions were just about equal, with each enjoying about 30 percent of supplier contracts awarded.

This trend is not even near its peak yet. By 2008, auto and industrial products companies will more than double their percentage of spending on components and materials in low-cost countries (LCCs), according to a recent Booz Allen Hamilton survey of purchasing executives. Moreover, apparel companies, which currently spend 50 percent of their procurement dollars in LCCs, say that within four years, these countries will provide virtually all of their material and supply needs. And for most companies, over half of the spending targeted for LCCs will be earmarked for China.

The Chinese experience can turn sour, though, when procurement managers fail to systematically assess the fit between the requirements for purchased components and the realities of the China-based supply chain. They can inadvertently increase their cost of operations and put revenue at risk--thereby compromising their profitability. Some commodities that are sourced in China, it turns out, can more wisely be procured from another low-cost region, or even from domestic sources.

Each of five critical dimensions must be examined for every prospective purchase of components and materials for a company to determine whether purchasing from China is the best decision.

Manufacturing cost
China can provide Western parts and materials buyers significant benefits in overhead and raw material costs. Total overhead rates in China vary significantly by supplier, but can be less than half of Western levels.

Chinese labor rates also are extremely attractive relative to those of other countries. Including hourly wage rates and benefits, Chinese wages are about 10 percent of salaries in the United States and Western Europe and 50 percent of the average wage in Mexico. There is still a large supply of low-cost labor throughout the country, and manufacturers in major cities (Shanghai, for example) are supported by government efforts to keep wages low by bringing additional workers to urban areas.

Nevertheless, as more and more companies purchase supplies from China, there has been wage inflation in some large cities. As a result, labor-intensive supplier relationships, such as some automotive OEM programs, are moving inland, where wages remain lower. Moving inland, though, makes shipment scheduling more difficult and often more costly, because of poor roads and the lack of developed logistics infrastructures.

These trends show how executives should evaluate manufacturing cost when making procurement decisions:

•  The total labor content (direct and indirect) of a product is the primary driver for China procurement savings. For a product with a large labor component (i.e., 25 percent or more of the product cost structure), low Chinese wages represent a meaningful benefit. In these cases, the labor savings--applied labor hours multiplied by the difference in the labor rate--can be significant. But for some products, such as shoot-and-ship injection-molded plastics, for which one operator manages several high-speed machines, the labor requirements are too low for China sourcing to be the best option.

•  Real overhead savings can be realized in China. Local labor rates are embedded in the price of many of the goods and services that are critical components of overhead costs. And many suppliers use local machinery, which can also cost as little as half the price of imported equipment.

The time delay generated by the longer supply chain significantly increases the chances of both stock-outs in the near term, and excess and obsolete inventory in the long term.

•  Savings on raw materials in China are possible when these materials are locally sourced from competitive suppliers. Electronic components and some lower-end steel grades are areas where local competition can lead to raw-material savings. However, when Chinese suppliers have to import materials--such as high-quality steel alloys--there can be a significant cost penalty in a procurement agreement.

•  To gain the highest potential returns from a Chinese procurement effort, the amount of labor should be maximized. It often pays to think beyond the purchase of the part, and to include machining and assembly activities in the sourcing contract. For example, when an automotive company attempted to purchase raw aluminum castings from China, the Chinese supplier offered savings of only 1 percent over the bid of a U.S. supplier. By redoing the bid to include finished machining of the parts and the incremental labor, handling, and overhead, the automotive company realized a 15 percent total savings from the same supplier.

Transportation efficiency
Procurement from China naturally increases transportation cost over more local sourcing arrangements. In China, a product must go from the factory to the port, onto a ship, and then to the U.S. or another major market, where it is unloaded and trucked to its destination. The cost of ocean transport alone from China to the United States is $2,500 to $3,000 per container. For a $12 casting, the total incremental transportation cost is $1.10, compared with 30 cents for a typical Mexican supplier shipping to the United States.

Financial assessment of China sourcing should be made on the total landed cost of a product, which includes the manufacturing cost differential as well as the full logistics cost--hence two major considerations when assessing transportation costs:

•  Measure the ratio of transport cost to total product cost. Since ocean transportation costs are essentially a fixed cost per volume shipped, economics favor China when smaller, higher-value items are involved. For instance, thousands of small electric motors can be packed in one container, spreading the fixed costs over numerous units. Conversely, plastics and stamping assemblies for auto interiors require protective packaging that results in low packing density and fewer parts to share the burden.

•  If airfreight is required--for instance, to meet lead time requirements shorter than ocean freight allows--the savings generated by lower-wage-rate manufacturing in China are usually eliminated. Airfreight costs about $1.51 per pound; ocean transport, 6 cents per pound. Only products with very high packing density and high value per unit (for example, printed circuit boards) can support the costs associated with airfreight.

Lead time and scheduling stability
Ocean freight adds four to six weeks to the delivery time from China to Western markets. The risk of this extended supply chain to the core business needs to be incorporated into any assessment of whether China is the right place from which to procure. The time delay generated by the longer supply chain significantly increases the chances of both stock-outs in the near term, and excess and obsolete inventory in the long term. So procurement executives must carefully weigh several factors to ensure that their lead times and scheduling remain stable:

•  Because Chinese providers typically include large volumes of a product in each shipment, buyers face inventory and defect risk. Purchasing in large volumes means more of the buyer?s dollars are tied up in massive inventory investments, a source of inventory carrying costs and, potentially, obsolescence. Moreover, if manufactured defects are spread throughout a shipment, that could mean thousands of useless components.

•  For some product categories, ocean freight lead time can make a Chinese procurement effort unwise. For instance, a manufacturer of telecom infrastructure seemed to be a perfect fit for China because its wiring panels required labor-intensive assembly. However, this benefit was canceled out because the manufacturer?s customers often demanded a high degree of late-stage product customization and expected a rapid lead time. The manufacturer was able to charge more for these customized products and, thus, pay the slightly higher wages in Mexico and Eastern Europe for a quicker turnaround on components delivered to U.S. and Western Europe operations.

Product design
Engineering changes can introduce instability even into mature supply chains. Because the items most frequently sourced are components made up of other components, when an old version of a product becomes obsolete, a change can create a cascade of incompatibility. What?s more, manufacturing operations require time to digest new products and processes; subpar quality frequently corrupts operations during a transition period.
China may still be a lucrative gold mine for some companies. Others, though, should be careful: The ore could be a fool?s blend.

The long lead time and large order quantities required to do business cheaply in China exacerbate both these problems, because the arrival of old-version components can continue for weeks after an engineering change. And it can require an equally long time to take corrective action on lower-quality parts--thus, the central product-design considerations when sourcing from China:

•  Products with one or more design changes per quarter may not be suitable for Chinese procurement. Frequent design changes mean the supply chain could end up with a continuous run of obsolete inventory and on a learning curve that resembles a merry-go-round.

•  China is probably not a good option when a high degree of skill is required to implement design changes. Chinese supply chains are challenged by the language gap, a lack of local technical capability for implementing changes correctly, and the complexities of suppliers' processes for managing launches of new products.

Technical capabilities
China is not currently a viable option for highly specialized manufactured products made with custom equipment, such as application-specific copper-wrapped coils or high-speed connector assemblies. The processes used to manufacture such products often require specific technical knowledge of product engineering or equipment design that generally is not available among suppliers in new procurement markets such as China.

By contrast, almost all suppliers can handle commoditized processes such as stamping, casting and manual electronics assembly. Companies buying from Chinese sources must weigh two issues relating to the supplier's capabilities:

•  Sourcing subcomponents in China and maintaining technology-intensive activities in more highly skilled domestic factories will probably yield a better total cost return than procuring the total product. Technology-driven processes often need significant oversight if process control is to be maintained. That frequently can be achieved only in sophisticated plants in developed countries.

•  The evolving sophistication of Chinese suppliers means careful buyers can gain some important, albeit temporary, advantages. Although products made with the least complicated, most mature technologies are the best choices to source from China, the nation's suppliers continue to develop increasingly sophisticated skills. As a result, more companies are sourcing process-sensitive products, such as rubber and machined parts, from China. That can be a good decision when other critical procurement dimensions, such as lead time, engineering changes, and labor and transportation costs, favor China. It also can give a purchaser a boost over competitors who haven?t figured out where to go to combine China?s cost advantage with its emerging capabilities.

China remains one of the world?s most desirable sourcing opportunities. Its wage advantages are not likely to end anytime soon, and its skills as a supplier and manufacturer will only grow stronger. But as is the case with any other procurement effort, obvious costs, such as labor, are not the only factors to take into account. When the other, subtler criteria in our model are considered, China may still be a lucrative gold mine for some companies. Others, though, should be careful: The ore could be a fool's blend.

To read more articles like this one, visit

Copyright © 2005 Booz Allen Hamilton Inc.

Reprinted with permission from strategy+business, a quarterly management magazine published by Booz Allen Hamilton.

Interested in more research studies like these? If so, sign up for strategy+business enews, a service of Booz Allen Hamilton's strategy+business magazine.