When, one of the best places to start is with lighting. For starters, you can test the waters with a single or set of lights — letting you dip a toe in the smart light pool before diving in head-first.
When it comes to smart lighting, one of the most seamless and natural ways to upgrade your home is with. They work as intended, even when the internet goes out and you can hardly notice them once they're installed.
Before you go all-in on smart switches, however, there are some things you should know.
Smart bulbs, switches or plugs?
First, make sure you're getting the right kind of smart lighting for your home. Smart switches are one of the more common options when it comes to smart lighting. You can find them at pretty much every big box home improvement store.
That said, smart switches aren't the only or definitive best option for upgrading your home. There are two other common types of smart lighting: smart bulbs and. And there's no one size fits all answer for which is the best.
Smart bulbs, for instance, not only let you remotely control the lights or put them on a schedule, they often also let you change the color of the lighting on the fly. Smart plugs keep things simple while letting you turn an existing lamp with a regular light bulb into one you can turn off and on from anywhere. They sometimes let you track energy consumption, as well. Both of these options come with a plug-and-play installation. If you don't like it or want to move it later on, you can with little to no effort.
Smart switches, on the other hand, are the modest midpoint between the other two and the most natural to use. You can still control the lights from the wall switch like you always have, but you'll get some added benefits, like dimming or a pop-out remote that will still give you easier manual control of the lights. But they'll also work with existing light fixtures that may not accommodate a smart bulb. That said, installation is much more hands-on and permanent.
You'll have to. And the best part is you don't have to choose just one. You can mix and match throughout your entire home, fitting each individual light with the most appropriate smart light option.
Alexa, Google, Siri and more
When choosing which smart switch you should go with, consider what the switches are compatible with. If the smart switches you choose can communicate with Amazon Alexa, Google Home, HomeKit or SmartThings, the possibilities for how you can control your lights or what you can do with them are virtually limitless.
You'll quickly find that being able to tell a Google Home or Alexa-enabled speaker to "Turn on the living room lights" is often faster and more convenient than reaching for your phone and fumbling through an app. You'll be able to integrate the lights into your Google, turn off all the lights," when on our way out the door.or let you know when it's time to head to bed at night. And, one of our favorites is, "Hey
Are your light bulbs compatible?
Like any dimmer switch, ensure that your smart switch is compatible with the lights you have installed -- especially if they're LED lights. Lutron, for example, has a compatibility tool you can use to find out which light bulbs (including recessed and can lights) are compatible with their switches.
And, this is an unlikely scenario, but if you are planning on installing smart light switches for sockets that have smart bulbs (like Philips Hue or LIFX) installed in them, you'll have to swap them out for "dumb" bulbs.
Consider your three-way switches
If you have Xfinity CNET Smart Home, we used Lutron Caseta remotes to make the installation dead-simple, since they look and act like three-way switches, but don't require as much handiwork to pull off.(as many of us do in hallways and large rooms, like living rooms) consider how you'll tackle these. At the
That brings me to the next point, and it's a big one: cost. Smart switches are not cheap, especially if you plan to install them throughout your entire home.
Dumb light switches cost just a couple bucks a piece. Installing all new switches in my home would cost roughly $60 (£43 or AU$79). That's just a few dollars more than the cost of one, which retails for around $55 (£39 or AU$72). Installing them around my house would cost approximately $1,100 (£787 or AU$1,446).
Given this, you can likely install a few smart bulbs and plugs around the house for a lot less money. But the installation won't be nearly as seamless.
To be fair, not every light in your home needs to be connected. And some switches are redundant, so you wouldn't want to install two smart switches for one set of lights. But the difference in cost is still considerable.
The ZigBee versus Z-Wave conundrum
If you dabble with a smart thermostat, a few smart bulbs, locks and smart speakers, you really don't have to worry much about what wireless communication standard they use. Instead, pick either Alexa, Google Home, HomeKit or SmartThings as a "brain" and move on.
When dealing with a bigger, more robust smart home with smart switches, garage doors, full-on security and more, you'll likely be met with the decision between ZigBee and Z-Wave. Both of these are radio protocols that require a compatible hub for your devices to communicate with your phone. Choosing which one to go with can be tough.
Fortunately, while the protocol divide does still exist, it's quickly becoming less of an issue. While ZigBee and Z-Wave aren't directly compatible with one another, smart speakers like Alexa and Google Home and other hubs now support one or more of the standards and are helping bridge the gap.
Smart home compatibility tool: Find out what smart home platforms work with your existing kit and vice versa.
CNET Smart Home: We transformed a real house into a test lab for the hottest category in tech.