Asus AC2400 RT-AC87U Dual-band Wireless Gigabit Router
ASUS RT-N66U - wireless router - 802.11 a/b/g/n - desktop
ASUS RT-N56U - wireless router - 802.11 a/b/g/n - desktop
Linksys WRT1900AC Wireless Routerstars
Looking for the most powerful (and DIY-friendly) router for your home? Linksys' latest...
I was first introduced to the High Power Wireless-N 600mW Gigabit Router at CES 2012 and was skeptical about the Wi-Fi coverage Amped Wireless claimed for the router: some 10,000 square feet, about 10 times the area of a good-sized apartment.
As it turned out, for the most part the router delivered in my testing, offering the longest range I've seen and decent Wi-Fi data rates. It's far from perfect, however, with its lack of support for the 5GHz band, and the somewhat flimsy chassis.
Nonetheless, with a price of around $150, it would be a good choice for those who need to share Internet access in a large office or property.
Setup and design
The R10000G is a simple router with a typical rectangular shape. On the back it has two extra-large detachable antennas that really crowd the four color-coded LAN ports and one WAN port. These ports are Gigabit Ethernet, meaning if you don't care about wireless, you will still get a very fast wired network out of the router.
On the front the router has an array of LED lights that show the status of the ports on the back, the connection to the Internet, and the router's power status.
The router is designed to be put flat on a surface with four rubber feet. It also comes with a small detachable base so it can be placed in a vertical position. However, since both the base and the router are very light, it's unlikely that you could use it in the vertical position for a long time without it toppling.
The bottom of the router also has holes for wall-mounting. There you'll find the label that shows all that you need to set up the router.
According to the label, basically, the router comes preconfigured with a wireless network and encryption, which might or might not be the same for every unit. This means all you need to do is plug the router into power and connect its WAN port to an Internet source and you're set. (Amped Wireless makes it extra-easy by including two CAT5 cables, already plugged into the WAN and a LAN port of the router.) You then can just connect a Wi-Fi client to the provided network manually or via the Wi-Fi Protected Setup (WPS) button, which is also on the back of the router. Note that you probably want to avoid using WPS for now because of some.
If you want to disable WPS or further customize the router, just point a browser from a connected computer to its default IP address, which is 192.168.3.1, with the default log-in of admin for both the username and password. This information is also printed on the label on the underside of the router.